hazee

pictures?

aranu

alright cant way to use this when i get my parts. thanks for DIY!

patrickkc

i tried it and my LEDs dont light up,,,, i dunno why i've tried turning them but no good??? help please hahah stuck in garagae!!!

patrickkc

nvm.. put the orginals back in.. and it lit up then put the leds in agian and it lit up. yay@

pg2373

Which lights would I need resistors so I won't throw an error code? I am planning on doing the tag lights and eyelids. Would replacing them with LED's throw an error code?

Royce118

Can I know what what tools u use to remove the screws? The guy from the part shop were using some tools but he cant seem to remove it..

spoolIT85

Just plain old torx screws

Royce118

I believe the easiest way to change them is to remove the 3 screws from the trunk. Ami right? Thanks alot for helping out..

spoolIT85

YUP, its step 1 from the DIY

Royce118

Thanks alot buddy... The guy from the store where i bought the lights from was trying to gain access to them through the upper part of the license plate where the bulbs actually were.. I believe it wouldn't take long to replace right?

spoolIT85

At most, it will take about 15-20 minutes... really quick change!

Good luck!

tcorner

before and after

Royce118

Thanks! Will post up pics after I install them.

Nice! What lights are those?

Royce118

I've got mine done! Will post pics later at night.

tcorner

Here lights

spoolIT85

^^ that looks great!

dambulla

hello, I wonder if you could insert the guide for changing plate lights w204 station wagon, as it is' different from the sedan

miks

i want to know which model did you use for your bulb and how did you install the camera?

spoolIT85

The LEDs from one of the group buys, can't really remember, a member from Sweden, I think?

As for the camera, I just bought the camera online, the connector cable from midcity engineering, took it to bestbuy and had them install it on the location that i wanted ($75 for the install and warrantied for a year)

Royce118

You can try checking out the LED license plate from JBSPEED as well.

miks

how much for 4 polar g lights for the front eyelid to ship to spain? interesed in buying. are those the same for the licence plate aswell? loking for led though...

Royce118

Check out the Polargs light from ebay. Shouldn't be too expensive. And no polargs are not LEDs. They're just tinted halogen bulbs which gives off a hid look. You can check out how Polargs would look on the license plates on my post on top. They're not as bright as stock though. If you want Leds for the license plate I would suggest you getting them from JBSPEED. Mine have been in for about 3 weeks without any problems at all.

Royce118

Where can this be bought? Have you got it installed in your car?

jmsspratlin

I purchased the ones from JBSPEED and you have to change out the whole lighted housing, so in essence, you have to take more of the car apart (according to the website directions). Wish I had of done more research before buying. Live and learn though.

Royce118

I've got mine from JBSPEED as well and I'm loving it. Not much of a problem installing for me. Got mine done by a friend.