mr inkredibul

You are so lucky...my plastic fasteners do not look like that and I am having a b*tch of a time removing them

wilchily

Thanks, I can't believe it will be that hard to change the license plate buble. A lot harder than W203.... lol

E92-Lighting

looks great, we also stock these exact types

gOt BoOsT

i just did mine in about 20 minutes by removing the outside 4 pop clips on each side to pry back a bit on the liner and gain access. the only problem is how tight of a fit the hids are in the housing...you can barley twist the socket back into place looks good tho!

x942k6

what tool should i use to remove the plastic fasteners? = = i know i sound stupid...

Samieee

Flat screwdriver

x942k6

thanks for answering
: ( i broke the cover...was trying to pull put the bulb...

AZN Optics

Third tool down. You can find one in pretty much all hardware stores. Pretty useful for our 204s since there are so many pressure pins holding everything together.

sooplush

Please note these instructions are incomplete for the JBSPEED LED replacements. This thread is specifically for bulb replacements.

The JBSPEED LEDs replace the bulb and the housing, which requires the extra step of removing the exterior trunk handle (a total of 4 extra screws, two on the handle on the exterior, and two on the inside). There are DIY instructions for that elsewhere on this forum.

I tried to pry of the exterior trunk handle and scratched the paint slightly. My own fault for not being patient and checking back when the install was not working out, another DIY lesson I should know by now, lol...

x942k6

Same here....felt like my nails are coming off....

Black Rain

Same with me. the plastic fasteners are impossible to remove and my trunk doesnt even look the same? 2010 c300..

mr inkredibul

I used a flat head screw driver, I small one to pry those b*tches off lol. Luckily enough i have done it twice and have still been able to reuse each fastener.

mybenz729

i've been looking for these instructions. just got the bulbs in the mail. thank you

mschill72

cool post...but for some reason I am not seeing the pictures in the first (instructional) post...can someone repost?

eskimomice

^ agree... the pictures aren't working...

IcyKillah

I found this....

Adrian97c

good find! too bad the video skips the part where he actually changes the license plate bulbs!! wth?

alam_mas

Is there something wrong? There picture don't come out - only some highway code danger signs.

Doa

cool i can use this to install my new camera in the back
btw is there something like that to replace a navigation screen?

skypi

There is no picture showing on how to remove everything...

Thank you

dam4fun

I went to the internet today ...