Some quick pics of my new MRR GT-1 wheels and ballast/resistor mounting under hood
#1
MBWorld Fanatic!
Thread Starter
Some quick pics of my new MRR GT-1 wheels and ballast/resistor mounting under hood
Hey guys, just got my car back from the tire shop. It's raining here in NJ today and these are with my crappy cell phone.
I literally came home to post these, and I am off to my other shop to get an estimate on painting the grill black (flat black slates) glossy black on the chrome, my carlsson style CF front lip, and my painted amg trunk lip.
Also, I know I need to get my windows tinted. I am waiting to go through inspection.
But here are some quick pics of the wheels AND 2 pics of the driver and passenger side wheel wells under the hood where I mounted the resistors and the ballasts with 3M tape. Its holding well and no issues. If you notice on the passenger side I made the tape under it, so incase it fell it would catch onto the other tape. But haven't had an issue they are holding well.
Side note: you can kind of see the HID lighting as well in some of the pics. And the wheels are front: 18x8.5 ET45 with 225/40/18 and rears 18x9.5 ET48 on 255/35/18. Tires are Pirelli P Zero Nero All-Seasons.
![](http://i5.photobucket.com/albums/y177/z0sick6/nr4.jpg)
![](http://i5.photobucket.com/albums/y177/z0sick6/nr2.jpg)
![](http://i5.photobucket.com/albums/y177/z0sick6/nr5.jpg)
![](http://i5.photobucket.com/albums/y177/z0sick6/nr1.jpg)
![](http://i5.photobucket.com/albums/y177/z0sick6/nr3.jpg)
![](http://i5.photobucket.com/albums/y177/z0sick6/nr6.jpg)
Driver side:
![](http://i5.photobucket.com/albums/y177/z0sick6/hid1-1.jpg)
Passenger side:
![](http://i5.photobucket.com/albums/y177/z0sick6/hid2-1.jpg)
Enjoy.
-Mike
I literally came home to post these, and I am off to my other shop to get an estimate on painting the grill black (flat black slates) glossy black on the chrome, my carlsson style CF front lip, and my painted amg trunk lip.
Also, I know I need to get my windows tinted. I am waiting to go through inspection.
But here are some quick pics of the wheels AND 2 pics of the driver and passenger side wheel wells under the hood where I mounted the resistors and the ballasts with 3M tape. Its holding well and no issues. If you notice on the passenger side I made the tape under it, so incase it fell it would catch onto the other tape. But haven't had an issue they are holding well.
Side note: you can kind of see the HID lighting as well in some of the pics. And the wheels are front: 18x8.5 ET45 with 225/40/18 and rears 18x9.5 ET48 on 255/35/18. Tires are Pirelli P Zero Nero All-Seasons.
![](http://i5.photobucket.com/albums/y177/z0sick6/nr4.jpg)
![](http://i5.photobucket.com/albums/y177/z0sick6/nr2.jpg)
![](http://i5.photobucket.com/albums/y177/z0sick6/nr5.jpg)
![](http://i5.photobucket.com/albums/y177/z0sick6/nr1.jpg)
![](http://i5.photobucket.com/albums/y177/z0sick6/nr3.jpg)
![](http://i5.photobucket.com/albums/y177/z0sick6/nr6.jpg)
Driver side:
![](http://i5.photobucket.com/albums/y177/z0sick6/hid1-1.jpg)
Passenger side:
![](http://i5.photobucket.com/albums/y177/z0sick6/hid2-1.jpg)
Enjoy.
-Mike
#3
Super Member
Join Date: Nov 2007
Location: North Jerzeee
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
Lexus IS 350 F Sport
Looks great
!!! You'll luuv driving at night now with those HIDs
!! They're soo soo much better than the P1 package lighting that most C's here in NJ comes with !!!!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#5
MBWorld Fanatic!
Thanks for the pictures of where you mounted them. I guess I'll mount them there too.
I bought this tape at Lowe's. http://www.environmentallights.com/p...unting_tape_60 But I saw this tape at Wal-Mart. http://www.amazon.com/3M-4011-Extent.../dp/B0016P6A2A
Should I return the one from Lowe's and get the one from Wal-Mart?
#6
Former Vendor of MBWorld
Join Date: Nov 2009
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
2008 C300 & 2007 GSXR600
I bought the DDM kit as well with the Cancelers and got the 2 foam tape too. I went out and bought a small roll Industrial Velcro from Home Depot. I gotta say that thing holds like its got a kung fu grip on the ballast. Mounted mine around the same area as the OP and it hasn't budged since.
The one you bought at Lowe's should be good enough to hold. Just make sure you clean the surface very well before laying down the tape.
The one you bought at Lowe's should be good enough to hold. Just make sure you clean the surface very well before laying down the tape.
#7
MBWorld Fanatic!
Thread Starter
I got my DDM kit on Wednesday. They don't give you any 3m tape. They give you 2 crappy foam tape pads.
Thanks for the pictures of where you mounted them. I guess I'll mount them there too.
I bought this tape at Lowe's. http://www.environmentallights.com/p...unting_tape_60 But I saw this tape at Wal-Mart. http://www.amazon.com/3M-4011-Extent.../dp/B0016P6A2A
Should I return the one from Lowe's and get the one from Wal-Mart?
Thanks for the pictures of where you mounted them. I guess I'll mount them there too.
I bought this tape at Lowe's. http://www.environmentallights.com/p...unting_tape_60 But I saw this tape at Wal-Mart. http://www.amazon.com/3M-4011-Extent.../dp/B0016P6A2A
Should I return the one from Lowe's and get the one from Wal-Mart?
The amazon link is what I used after I used the foam pads.
Thanks everyone.
I was at my painter and installer today.
The trunk spoiler and front lip along with painting my grill will go down on the 30th! I also have an extra taillight cause mine cracked, on the cracked one we are going to experiment with painting the red on our lights black. 1 coat 1st and then 2 coats and see if we can see through it well. I'll keep everyone posted. The DDM kit has very nice thin ballasts. The 3m thin double sided tape in the 2nd link worked well.
Trending Topics
#8
MBWorld Fanatic!
Thread Starter
Hey if any NY/NJ guys needs the hid kits installed, my buddy did mine for me. Hes a certified mechanic on euros and domestics. He does great work. He did my install for me. He can also install any grills, basically anything. He also is very very very reasonable with pricing. Let me know if anyone needs their HIDs in fogs installed its a pain, but he mastered it on mine. He did the 2nd side in 1/4 of the time, he knows just what to do.
Elaine your close, if you want your fogs done PM me (don't know if you have them or not).. The kit comes to $70 + shipping.. he'd probably only charge $50-$70 for foglight install, and its a 150% upgrade!
#9
Super Member
Join Date: Nov 2007
Location: North Jerzeee
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
Lexus IS 350 F Sport
omg i know! I love driving with just the fog light hids on when its cloudy! LOOKS AMAZING!!!!!!
Hey if any NY/NJ guys needs the hid kits installed, my buddy did mine for me. Hes a certified mechanic on euros and domestics. He does great work. He did my install for me. He can also install any grills, basically anything. He also is very very very reasonable with pricing. Let me know if anyone needs their HIDs in fogs installed its a pain, but he mastered it on mine. He did the 2nd side in 1/4 of the time, he knows just what to do.
Elaine your close, if you want your fogs done PM me (don't know if you have them or not).. The kit comes to $70 + shipping.. he'd probably only charge $50-$70 for foglight install, and its a 150% upgrade!
Hey if any NY/NJ guys needs the hid kits installed, my buddy did mine for me. Hes a certified mechanic on euros and domestics. He does great work. He did my install for me. He can also install any grills, basically anything. He also is very very very reasonable with pricing. Let me know if anyone needs their HIDs in fogs installed its a pain, but he mastered it on mine. He did the 2nd side in 1/4 of the time, he knows just what to do.
Elaine your close, if you want your fogs done PM me (don't know if you have them or not).. The kit comes to $70 + shipping.. he'd probably only charge $50-$70 for foglight install, and its a 150% upgrade!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#10
MBWorld Fanatic!
I bought the DDM kit as well with the Cancelers and got the 2 foam tape too. I went out and bought a small roll Industrial Velcro from Home Depot. I gotta say that thing holds like its got a kung fu grip on the ballast. Mounted mine around the same area as the OP and it hasn't budged since.
The one you bought at Lowe's should be good enough to hold. Just make sure you clean the surface very well before laying down the tape.
The one you bought at Lowe's should be good enough to hold. Just make sure you clean the surface very well before laying down the tape.
That's a good idea. I might look into this.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#12
MBWorld Fanatic!
I thought with AM HID kits, you don't get as much light projected down the road as the H7s? My car didn't come with xenons and I just threw on some Silverstar Utras but I am really missing HIDs since all my cars since 1999 had them with the exception of the C63.
#13
Former Vendor of MBWorld
Join Date: Nov 2009
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
2008 C300 & 2007 GSXR600
#15
Super Member
Join Date: Nov 2007
Location: North Jerzeee
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
Lexus IS 350 F Sport
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)