dudeitsmattx

Maybe drop your rear tire to 245/30/19 that's usually what people run in the rear this should help with the rubbing.

c133

looking at 20x8.5 et 40 and 20x10 et 45 with either 225x35x20 or 245x30x20 front and 255x30x20 rear stock height will I be ok ? Thanks

dudeitsmattx

They will fit. Rear will poke out from the fenders a little. Just about everyone that runs 20x10 in the rear has an offset in the rear of 48-55

c133

I have a 2012 c300 sport 4matic looking at 20x8.5 all the way around at +38 with 235x30x20 all the way around will this work , I am on stock suspension . Do I need a bigger rear tire ? Thanks

MFDONTRON

I have a 350 lowered on some super sports, what would I have to do to make some 18x9 ET 34 fit?

Becksan

All around or just in the back?

If they fronts are you won't make them fit with stock fenders etc

SwoodyC300

my new wheels are 19x9 et40 and 19x10 et44

so they wont fit?

MFDONTRON

Is this directed towards me? If so, yes all around

jmoses

I am new to the MB world but am already looking for a set of wheels for the summer. I have a '13 c300 4matic sport. Am I wrong in assuming that in order for the AWD system to work and not destroy the differential the wheels all need to be the same width? I know that the stock 17's are staggered but what offset and width should I be looking for in a set of 18's. I am on stock springs and have the stock brakes.

Thanks

JimB93

I'm a newbie to the Mercedes game so I apologize in advance if this has already been asked. I have a 09 c300 4matic and I'm looking at some 19x8.5 +35 front and 19x9.5 +35 rear wheels. Am I going to have any issues running these? I'm currently stock ride height but plan on putting some h&r sport springs on in the future. Also I need a tire size recommendation. Thanks!

dudeitsmattx

Your wheels should fit fine. He was talking about the guy with et34 front. et40 will fit

dudeitsmattx

The et34 in front is going to poke and poke in the rear also. May not even work in the front

dudeitsmattx

+35 is to low of an offset for our cars.... Unless you want poke and want to roll your fenders when you lower the car and have neg camber

JimB93

Damn. That's not what I wanted to hear lol. Well thank you for the input. I'll keep looking for some different wheels then!

Becksan

I have rubbed a few times on the rear, but I also got a blown shock, so I'll have to see once I get my new installed. Current on stock shocks so 😣.

But I'll let you know as soon as I try. I haven't had 2 people in the back yet, but I would most likely rub. I'll be doing adjustments when installing the new shocks to avoid rubbing.

dudeitsmattx

If I were you for front go with 19x8.5 et39-44. For the rear go 19x9.5 et45-48, or you could go 19x10 et50-55

JimB93

Those are what I'm looking at now. What about tire size?

dudeitsmattx

Front 235/35/19. Rear 255/30/19. If you go 10" wide in the rear you would want 265/30/19

timsvr

**** i run 225 35 on 9s all around lol

dudeitsmattx

That's fine those fit. But I assume your rim lip is not totally protected by the tire the correct way.

SwoodyC300

Wheels came in and the fronts fit perfect haven't had time to do the rears yet

dudeitsmattx

Nice looks good.. What tire size for the rear did you go with? And do you plan to lower the car any? Cause most people that go 10 wide in the rear go with et47-55. It should be close with et44 since you went 19's and not 20's. 20x10 et44 would need to have the fenders rolled for sure.

Becksan

Damn nice design on the new wheels! - I think the rear is going to poke though :S - But I'm excited to see these on!


Are the CVTs in the background 19" as well?

SwoodyC300

im on h&r SS now (gonna bag it if I cant find coilovers) Im thinking of doing 265/35 in the rear and 245/35 front

SwoodyC300

appreciate it and yup CVTs lol gonna be for sale after I figure out my suspension