W204's and offsets of wheels
#1701
#1702
Member
Do you want to run bags or coils? Look a few posts above for the purple C63 Cocaine is running. That's the most aggressive as far as stance that I have seen but he is also a C63 so he has wider front fenders. As far as "track" aggressive I would look into something in the x9 +35 range. I'm running 19x8.5 +45 with 5mm spacers all around. I wish they were +35 but then I'd have to roll fenders etc etc.
#1703
Super Member
Join Date: May 2016
Location: Perkasie, PA
Posts: 536
Likes: 0
Received 41 Likes
on
40 Posts
2014 C300 Sport
Nope no air, not doing that again on a daily lmfao.. ill be getting H&R Super Sports. I would do coils but Ill save that for the c63 I get next year. I really only want a clean lowered and aggressive look to satisfy my itch for being different. Your setup is dope looks pretty mean.
#1708
Super Member
Join Date: May 2016
Location: Perkasie, PA
Posts: 536
Likes: 0
Received 41 Likes
on
40 Posts
2014 C300 Sport
#1709
Super Member
#1713
Super Member
#1715
Update cr Kai's
Sorry for potato qualify
Hey guys just an update on my progress. Been super busy at work so I haven't been able to work on it as much as I'd like. I got the front fitment to my liking and this weekend I plan to work on the rears, (run some camber and a 10mm spacer for poke).
Hey guys just an update on my progress. Been super busy at work so I haven't been able to work on it as much as I'd like. I got the front fitment to my liking and this weekend I plan to work on the rears, (run some camber and a 10mm spacer for poke).
#1717
Super Member
Join Date: May 2016
Location: Perkasie, PA
Posts: 536
Likes: 0
Received 41 Likes
on
40 Posts
2014 C300 Sport
Sorry for potato qualify
Hey guys just an update on my progress. Been super busy at work so I haven't been able to work on it as much as I'd like. I got the front fitment to my liking and this weekend I plan to work on the rears, (run some camber and a 10mm spacer for poke).
Hey guys just an update on my progress. Been super busy at work so I haven't been able to work on it as much as I'd like. I got the front fitment to my liking and this weekend I plan to work on the rears, (run some camber and a 10mm spacer for poke).
#1718
For sure I'm hoping to get the rears dialed in this weekend if I have time. I definitely want flush fitment in the rear like the front
#1719
Member
Sorry for potato qualify
Hey guys just an update on my progress. Been super busy at work so I haven't been able to work on it as much as I'd like. I got the front fitment to my liking and this weekend I plan to work on the rears, (run some camber and a 10mm spacer for poke).
Hey guys just an update on my progress. Been super busy at work so I haven't been able to work on it as much as I'd like. I got the front fitment to my liking and this weekend I plan to work on the rears, (run some camber and a 10mm spacer for poke).
#1721
Newbie
Join Date: Jul 2017
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes Benz C250 1.8L turbocharged
Fitment
Curious,I'll be purchasing the same wheels and offset as well,I have h&r super sport springs,will utilize the 5mm spring pads as well, how's the ride qaulity for everyday driving (I don't drive the car everyday) can use spring pads in the front too?
#1722
While I dig through 69pages trying to find the exact size of the wheels im looking for. Would really appreciate it if someones got the answer.
Currently have a 2012 C300 with 17" staggered amg wheels.
17x7.5 et47 225/45r17
17x8.5 et58 245/40r17
The wheels im looking at are
18x8 et32 with 245/40r18
And using a offset calculator I get the following,
Front: Will have 9mm more Inner clearance, and Outer position extended by 21mm
Rear: Will have 32mm more Inner clearance, and Outer position extended by 20mm
Will these be safe to run with the rear increasing 32mm inner clearance? And will they rub?
Currently have a 2012 C300 with 17" staggered amg wheels.
17x7.5 et47 225/45r17
17x8.5 et58 245/40r17
The wheels im looking at are
18x8 et32 with 245/40r18
And using a offset calculator I get the following,
Front: Will have 9mm more Inner clearance, and Outer position extended by 21mm
Rear: Will have 32mm more Inner clearance, and Outer position extended by 20mm
Will these be safe to run with the rear increasing 32mm inner clearance? And will they rub?
#1723
Newbie
Join Date: Dec 2015
Location: Nor Cal
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
w204,w212
I am running the same set up but the rear are rubbing bad even after I rolled my fenders....please keep me updated, would like to see how your car looks like with your set up.
#1724
ROTIFORM IND-T R126 Dr
Model: Rotiform IND-T R126 ( Directional )
Size: Front - 19 x 8.5 / Rear - 19 x 10.0
Bolt Pattern: 5 x 112
Offset: Front - +35mm / Rear - +40mm
Centerbore: 66.56mm
Will these fit? Will Lowered on Eibach.
Size: Front - 19 x 8.5 / Rear - 19 x 10.0
Bolt Pattern: 5 x 112
Offset: Front - +35mm / Rear - +40mm
Centerbore: 66.56mm
Will these fit? Will Lowered on Eibach.
#1725
18x8 +35 all around
Not the best pics but I wanted to share.
I had not seen this set up really listed in the forum anywhere.. at least I dont think I did.
These are 18x8 +35 all around on 235/30 and 255/35
I was a little hesitant to get these in this configuration from USARIM but they assured me it would be fine.
I think its a nice middle ground of factory with semi aggressive look/stance...
I had not seen this set up really listed in the forum anywhere.. at least I dont think I did.
These are 18x8 +35 all around on 235/30 and 255/35
I was a little hesitant to get these in this configuration from USARIM but they assured me it would be fine.
I think its a nice middle ground of factory with semi aggressive look/stance...
Last edited by truerogue76; 09-08-2017 at 05:41 PM.