Headlight has been removed! Now how to open it?
05-31-2011, 04:09 PM
#26
Junior Member
Thread Starter
Join Date: Feb 2011
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
C300
Like my retrofit? I have a 25% off code from theretrofitsource.com! You can get the same thing I got (morimoto mini h1 projectors)
Code is IH8MUD25(case sensitive)
You can call them also and they will apply the code for you! Hopefully this gets more people motivated to do a retrofit! Also, heat gun is safer than the oven if you are scared
06-01-2011, 10:04 PM
#28
Super Member
Join Date: Dec 2007
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
C300 Sport 6MT
My question to you got lost n the shuffle...
I see you retrofitted the halogen high beam/DRL with projectors. Did you retro the low beams as well?
Honest question here... will you actually use the retro'd highs/DRL? Looks cool for sure having dual projectors/gattling guns, but the lows do all the work in normal driving no?
Again, just an honest question...
I see you retrofitted the halogen high beam/DRL with projectors. Did you retro the low beams as well?
Honest question here... will you actually use the retro'd highs/DRL? Looks cool for sure having dual projectors/gattling guns, but the lows do all the work in normal driving no?
Again, just an honest question...
Last edited by Doanster; 06-01-2011 at 10:07 PM.
06-01-2011, 10:28 PM
#29
Junior Member
Thread Starter
Join Date: Feb 2011
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
C300
My question to you got lost n the shuffle...
I see you retrofitted the halogen high beam/DRL with projectors. Did you retro the low beams as well?
Honest question here... will you actually use the retro'd highs/DRL? Looks cool for sure having dual projectors/gattling guns, but the lows do all the work in normal driving no?
Again, just an honest question...
I see you retrofitted the halogen high beam/DRL with projectors. Did you retro the low beams as well?
Honest question here... will you actually use the retro'd highs/DRL? Looks cool for sure having dual projectors/gattling guns, but the lows do all the work in normal driving no?
Again, just an honest question...
so 4 projectors in the low setting
I'm sure alot of people will disagree with my decision but I will try to add a separate switch in the future
06-01-2011, 10:43 PM
#30
Super Member
Join Date: Dec 2007
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
C300 Sport 6MT
Holy Lumens Batman!!! 
Definitely never thought of that before, but on paper it seems like it'd work and you'd have all the light you need and then some. Overkill, IMO, but it may just work, assuming you bought two identical HID kits w/ four matching bulbs. You'll have quite a bit of adjusting/aiming to do since you'll have two stair-step cut-off shields overlapping each other. Hopefully you bought the re-based H7 bulbs from TRS because they advertise those to be of equal length to the stock halogens, thereby working well in the stock projectors. Otherwise, using regular bulbs that come with HID kits will give you a hot mess of a beam pattern. You GOTTA post pics after the final install!!!
Definitely never thought of that before, but on paper it seems like it'd work and you'd have all the light you need and then some. Overkill, IMO, but it may just work, assuming you bought two identical HID kits w/ four matching bulbs. You'll have quite a bit of adjusting/aiming to do since you'll have two stair-step cut-off shields overlapping each other. Hopefully you bought the re-based H7 bulbs from TRS because they advertise those to be of equal length to the stock halogens, thereby working well in the stock projectors. Otherwise, using regular bulbs that come with HID kits will give you a hot mess of a beam pattern. You GOTTA post pics after the final install!!!
Last edited by Doanster; 06-01-2011 at 10:47 PM.
06-08-2011, 04:18 AM
#36
Super Member
Lord have Merc-edes... Are you sure that's even legal???
I guess if they're aimed properly, you should be OK so I too would be interested in seeing the cutoff!
I guess if they're aimed properly, you should be OK so I too would be interested in seeing the cutoff!
06-08-2011, 04:19 AM
#37
Junior Member
Thread Starter
Join Date: Feb 2011
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
C300
06-08-2011, 05:43 PM
#40
Junior Member
Thread Starter
Join Date: Feb 2011
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
C300
09-26-2011, 12:34 AM
#42
Junior Member
Thread Starter
Join Date: Feb 2011
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
C300
Did some things to my c300...I regret all of it haha
So I am selling my tail lights and lowering coils
https://mbworld.org/forums/exterior-...ml#post4847689
So I am selling my tail lights and lowering coils
https://mbworld.org/forums/exterior-...ml#post4847689
09-29-2011, 06:25 AM
#43
Newbie
Join Date: Sep 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
c300
10-01-2011, 01:38 AM
#44
Junior Member
Join Date: Apr 2010
Location: California
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
2004 S430 (w220), 2008 C350 Sport (w204)
^^^yea your diy's are great.
I was wondering if anybody with the oem xenon headlights have tried this??? I'm gonna be doing this with a heatgun and I have the oem xenon's...is there anything I should be cautious of?
Do you have to sand the chrome before you paint or do you just paint on top of it?
I was thinkin about applying some sealant when closing up the housing. Can anybody recommend a good sealant to use? Silicone???
Thanks in advance.
I was wondering if anybody with the oem xenon headlights have tried this??? I'm gonna be doing this with a heatgun and I have the oem xenon's...is there anything I should be cautious of?
Do you have to sand the chrome before you paint or do you just paint on top of it?
I was thinkin about applying some sealant when closing up the housing. Can anybody recommend a good sealant to use? Silicone???
Thanks in advance.
11-21-2011, 02:09 PM
#48
Senior Member
Join Date: Oct 2011
Location: Gaithersburg, MD
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
4matic C300
. The masking off is the longest part that I found, but that's all paint jobs.
