Azn Optics = Legit HIDs!
#1
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
2009 C300 SPORT
Azn Optics = Legit HIDs!
Just installed azn optics hid kit with built in error cancellation. Works wonders so far. Drove it around for about an hour. So far so good. Anybody else using these also?
#4
SPONSOR/MBworld Guru
Glad you liked. Would love to get some more customer pics of the HID kits installed
#5
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
2009 C300 SPORT
i'll post them when i get home later tonight.
but the install was seamless. only problem i think i'll have is that i don't want to drill holes into the caps. do they sell rubber headlight caps?
but the install was seamless. only problem i think i'll have is that i don't want to drill holes into the caps. do they sell rubber headlight caps?
#7
SPONSOR/MBworld Guru
You could probably Macgyver something up with Home Depot parts or buy spare caps from dealer/junk yards. They're just dust caps. Just got to make sure the rubber grommets fit into the drilled hole to give it a clean OEM look.
Trending Topics
#8
MBWorld Fanatic!
Join Date: Sep 2009
Location: Dix Hills, New York
Posts: 2,108
Likes: 0
Received 7 Likes
on
7 Posts
2012 C250 Coupe
Just drill it out. You don't want condensation in there and this is the best available way. You can order the dust caps for like $7 each new if you want to get rid of HID or when you need to return the car if it is a lease...
#12
Super Member
#15
Newbie
Join Date: Jun 2011
Location: near the beach
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
C300.......my other car has a Hemi
I used Azn's HID's. All I can say is WOW!!!!! Simple install and the light patern is perfect. This is how our lights should have come from the factory! I did HID, eye brows and side markers (with clear conversion) I'll try and get some photos tonight, but unlike the saying "A picture is worth a thousand words" It's not, but I'll try
#18
Newbie
Join Date: Apr 2011
Location: bc canada
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
w204 c230 CW
the installation i think was a lot easier just removing the bumper, rather than the wheels and trying to zap strap stuff within the bumper...
just turn wheels from side to side to remove lining clips
use extension to remove bolts from fender to bumper
unbolt/unclip everything from up top
remove couple clips from below bumper.
done.
but the lights look awesome this is a super easy DIY
everyone should buy the HID's and LED's off aznoptics!!
just turn wheels from side to side to remove lining clips
use extension to remove bolts from fender to bumper
unbolt/unclip everything from up top
remove couple clips from below bumper.
done.
but the lights look awesome this is a super easy DIY
everyone should buy the HID's and LED's off aznoptics!!
#19
MBWorld Fanatic!
You really think its easier to remove the bumper to install the ballast. You dont even have to remove the wheel, it just makes it a little more easier to work. All you really techinically need to do is remove the 3 fasteners on the fender lining and thats it, but i chose not to fight with it.
#20
Newbie
Join Date: Apr 2011
Location: bc canada
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
w204 c230 CW
sure fair enough. maybe for a nice wide open easy to see work space, removing the bumper gets you access to lots of tight areas only accessible from the front. but either way works. wasn't knocking how you did it, you got it done, and it looks great!
i also put hid fog lights in. so the front bumper being removed was required.
i also put hid fog lights in. so the front bumper being removed was required.
#21
MBWorld Fanatic!
NP, but you dont even have to remove the front bumper for the fog lights....you can do it right from the front. Just remove (3) torx screws holding the foglight grill in and its right there
#24
Super Member
Still waiting for mine........
Bloody Postal Strike, I do hope they get back to work soon...............
SGTzAMG let me know how the install goes.....mine are being put into an ML350
I will look at doing the interior lights latter......one thing at a time....
ItsLoonie,,,,,,lets see some pics....
Bloody Postal Strike, I do hope they get back to work soon...............
SGTzAMG let me know how the install goes.....mine are being put into an ML350
I will look at doing the interior lights latter......one thing at a time....
ItsLoonie,,,,,,lets see some pics....
#25
SPONSOR/MBworld Guru
Still waiting for mine........
Bloody Postal Strike, I do hope they get back to work soon...............
SGTzAMG let me know how the install goes.....mine are being put into an ML350
I will look at doing the interior lights latter......one thing at a time....
ItsLoonie,,,,,,lets see some pics....
Bloody Postal Strike, I do hope they get back to work soon...............
SGTzAMG let me know how the install goes.....mine are being put into an ML350
I will look at doing the interior lights latter......one thing at a time....
ItsLoonie,,,,,,lets see some pics....
Yeah, that Canadian Post office strike is pissing me off too. I've got boxes stacking up of Canadian customers that I can't get their orders to.