ALL MODS DONE FOR THE YEAR!! PICS & VIDEO!
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 343
Likes: 7
From: Calgary, Canada
'13 C300 '14 E63S '08 E92 M3
ALL MODS DONE FOR THE YEAR!! PICS & VIDEO!
So I finally got the quad exhaust installed, had tint done as well.
Got the X-Pipe and 19" rims.
Gonna get ECU tune next summer.
[IGNORE]
One problem. My exhaust is too loud!
In the cabin i dont mind it what so ever, but the G/F thinks its way to loud and gets annoying when having to drive in traffic (stop and go)
Any easy quick way to just make it a bit quieter?
[/IGNORE]
I did just get them installed this morning. Maybe after a month of driving will they get quieter?
Now time to go take pics.
The Car is DIRTY!, cause it just rained and still is.
ill post up the video and pics now, but will update this thread once i get it cleaned and waxed.
BRB!....
Okay forget what I said about the loudness, im an idiot
IT WENT AWAY ?????
What the F*CK, lol
Like really it was getting a bit annoying to me as well, and I wanted to go super loud lol
but now it went away. Ill check under the car for bad welds, but
its all good now!
VIDEO
http://www.youtube.com/watch?v=40Rs7nVqGEE
PICS
Got the X-Pipe and 19" rims.
Gonna get ECU tune next summer.
[IGNORE]
One problem. My exhaust is too loud!
In the cabin i dont mind it what so ever, but the G/F thinks its way to loud and gets annoying when having to drive in traffic (stop and go)
Any easy quick way to just make it a bit quieter?
[/IGNORE]
I did just get them installed this morning. Maybe after a month of driving will they get quieter?
Now time to go take pics.
The Car is DIRTY!, cause it just rained and still is.
ill post up the video and pics now, but will update this thread once i get it cleaned and waxed.
BRB!....
Okay forget what I said about the loudness, im an idiot
IT WENT AWAY ?????
What the F*CK, lol
Like really it was getting a bit annoying to me as well, and I wanted to go super loud lol
but now it went away. Ill check under the car for bad welds, but
its all good now!
VIDEO
http://www.youtube.com/watch?v=40Rs7nVqGEE
PICS
Last edited by IgorDj; Jul 22, 2011 at 09:43 PM.
Senior Member
Joined: Oct 2008
Posts: 411
Likes: 0
From: So-Cal
c350
A c300 with xpipe and quads is not loud in any aspect. Either dump the girl or man up. Even a c350 with x-pipe and quads is not loud. Its basically on par with a 335i or g37s exhaust sound.
If you really want to keep the exhaust and quiet it down install some dynomat in the trunk/get a trunk mat to keep some of the noise out.
If you really want to keep the exhaust and quiet it down install some dynomat in the trunk/get a trunk mat to keep some of the noise out.
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 343
Likes: 7
From: Calgary, Canada
'13 C300 '14 E63S '08 E92 M3
UPDATE**
LOL i just finished taking some pics and recorded a video, in the cabin isnt as loud as it was before. Maybe thats because right after I got it welded on it would be louder than after it breaks some of it in. ??
lol i dunno
pics coming in a few secs
LOL i just finished taking some pics and recorded a video, in the cabin isnt as loud as it was before. Maybe thats because right after I got it welded on it would be louder than after it breaks some of it in. ??
lol i dunno
pics coming in a few secs
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 343
Likes: 7
From: Calgary, Canada
'13 C300 '14 E63S '08 E92 M3
A c300 with xpipe and quads is not loud in any aspect. Either dump the girl or man up. Even a c350 with x-pipe and quads is not loud. Its basically on par with a 335i or g37s exhaust sound.
If you really want to keep the exhaust and quiet it down install some dynomat in the trunk/get a trunk mat to keep some of the noise out.
If you really want to keep the exhaust and quiet it down install some dynomat in the trunk/get a trunk mat to keep some of the noise out.
but its more quiet now, dunno why lol
MBWorld Fanatic!
Joined: Mar 2009
Posts: 1,177
Likes: 2
From: UCF area Orlando/West Palm Beach FL.
c350coupe, Gencoupe R-spec
she really thinks it to loud? my c350 with magnaflow mufflers and x pipe isnt even loud in my opinion, if it was just installed it should quiet up a little or i agree with envy... dynomat
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 343
Likes: 7
From: Calgary, Canada
'13 C300 '14 E63S '08 E92 M3
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 343
Likes: 7
From: Calgary, Canada
'13 C300 '14 E63S '08 E92 M3
I know it got much more quiet. Like honestly before when I drove out, in the cabin it was getting annoying, i think it was because it was just welded on and didnt get any airflow through and what not,
now its perfect
also the video doesnt do it justice, bad camera its a bit more beefy, which is perfect and exactly what i want
now its perfect
also the video doesnt do it justice, bad camera its a bit more beefy, which is perfect and exactly what i want
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 343
Likes: 7
From: Calgary, Canada
'13 C300 '14 E63S '08 E92 M3
Thank you!
The Tips are off ebay for the s500
the thing is i had to do some welding and cutting my self.
Cause in the inlet exhaust on these pipes are angled upward and meant to be bolt out, and the (CO2) didnt even come out of the tips but there was a hole in the bottom, so i cut off the inlet, covered up the hole, cut the inlet in half welded it back in straight like it should be and powder coated it black and then took it in the shop to do the welding for the mufflers
i can link you the tips if u wish
for the 2 dual tip it was 120$ so i had to get them
The Tips are off ebay for the s500
the thing is i had to do some welding and cutting my self.
Cause in the inlet exhaust on these pipes are angled upward and meant to be bolt out, and the (CO2) didnt even come out of the tips but there was a hole in the bottom, so i cut off the inlet, covered up the hole, cut the inlet in half welded it back in straight like it should be and powder coated it black and then took it in the shop to do the welding for the mufflers
i can link you the tips if u wish
for the 2 dual tip it was 120$ so i had to get them
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 343
Likes: 7
From: Calgary, Canada
'13 C300 '14 E63S '08 E92 M3
Ya it's CF. I'll take better pics of it.
Thanks for the compliments.
Can't wait till this **** weather goes away so I can have a clean car and more pics
Thanks for the compliments.
Can't wait till this **** weather goes away so I can have a clean car and more pics
Senior Member
Joined: Oct 2008
Posts: 411
Likes: 0
From: So-Cal
c350
Looks and sounds great, give it like a week to settle and the exhaust will quiet up a bit with all the soot entering the piping and mufflers. Some lowering springs if snow isnt to big of an issue for you and your car is set!
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 343
Likes: 7
From: Calgary, Canada
'13 C300 '14 E63S '08 E92 M3
Ya i was gonna lower the car with H&R Sports or any other alternatives,
winter gets bad in Alberta like real bad. So i probs wont drive it in the winter
winter gets bad in Alberta like real bad. So i probs wont drive it in the winter
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 343
Likes: 7
From: Calgary, Canada
'13 C300 '14 E63S '08 E92 M3
Hey just a quick question
What are your opinions if i took off the 4MATIC and replaced with AMG, but kept the C300?
Im not a big fan of doing replicas, mainly those guys who have 3 Series bmw's and badge them M3, and try to sell them as m3's lol
Think its acceptable if i put C300 AMG?
What are your opinions if i took off the 4MATIC and replaced with AMG, but kept the C300?
Im not a big fan of doing replicas, mainly those guys who have 3 Series bmw's and badge them M3, and try to sell them as m3's lol
Think its acceptable if i put C300 AMG?
Senior Member
Joined: Jun 2008
Posts: 459
Likes: 0
08-C350 black/black
Hey just a quick question
What are your opinions if i took off the 4MATIC and replaced with AMG, but kept the C300?
Im not a big fan of doing replicas, mainly those guys who have 3 Series bmw's and badge them M3, and try to sell them as m3's lol
Think its acceptable if i put C300 AMG?
What are your opinions if i took off the 4MATIC and replaced with AMG, but kept the C300?
Im not a big fan of doing replicas, mainly those guys who have 3 Series bmw's and badge them M3, and try to sell them as m3's lol
Think its acceptable if i put C300 AMG?
