Deep 10mm Socket for rear bumper cover removal
#1
Member
Thread Starter
Join Date: Oct 2009
Location: Colorado
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
2012 C350 Coupe Loaded
Deep 10mm Socket for rear bumper cover removal
I need to remove my rear bumper cover. Well, when I went to remove it last weekend I found there are these STUPID long studs with a 10mm nut attatching the middle of the bumper cover
. You can see these by removing the hard plastic trunk panel (where the striker is). Problem is it looks like I would need a 4 or 5 inch DEEP 10mm socket to remove these.
Does anyone know where to find a socket like this? There is a tool listed in the WIS system. But the Merc dealer told me they don't sell tools.
![crazy](https://mbworld.org/forums/images/smilies/crazy.gif)
Does anyone know where to find a socket like this? There is a tool listed in the WIS system. But the Merc dealer told me they don't sell tools.
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
#2
MBWorld Fanatic!
Use a 10mm crows foot with extensions if you cant find a deep socket
__________________
__________________
Last edited by xXHotelCrazyXx; 08-23-2011 at 02:22 PM.
#4
Member
Thread Starter
Join Date: Oct 2009
Location: Colorado
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
2012 C350 Coupe Loaded
This is not a typical 10mm deep socket. The stud is at least 4 to 5 inches in length.
Thanks for the Google tutorial though.
Trending Topics
#8
MBWorld Fanatic!
Join Date: Feb 2004
Location: SEATTLE WASHINGTON USA
Posts: 3,986
Likes: 0
Received 6 Likes
on
6 Posts
'08 C300 Lux Barolo Red Beige Leather P2 MM 18" wheels '84 944
I need to remove my rear bumper cover. Well, when I went to remove it last weekend I found there are these STUPID long studs with a 10mm nut attatching the middle of the bumper cover
. You can see these by removing the hard plastic trunk panel (where the striker is). Problem is it looks like I would need a 4 or 5 inch DEEP 10mm socket to remove these.
Does anyone know where to find a socket like this? There is a tool listed in the WIS system. But the Merc dealer told me they don't sell tools.![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
![crazy](https://mbworld.org/forums/images/smilies/crazy.gif)
Does anyone know where to find a socket like this? There is a tool listed in the WIS system. But the Merc dealer told me they don't sell tools.
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
#9
#10
Super Member
https://www.harborfreight.com/sae-me...RoCwu4QAvD_BwE
I have this set of pass through sockets in metric sizes for my over length stud bolt/nuts
I have this set of pass through sockets in metric sizes for my over length stud bolt/nuts
#12
Unfortunately, that won't work in this bumper as there is only a small hole to get the socket into. Your sockets look great, but it appears the handle would have to go into the hole and that isn't going to happen.