Finally dyno'd my C200 with TMC Tuning Box
#26
Senior Member
1st one is stock I think and second is with chip.
Claus from Kleemann said that all the Benz he has worked on have alot more HP than what MB officially claims
For example C180 in China has 156HK, C180 in DK has 184HK but he dynoed it to 204HK...
But let me ask Claus again!
=================================
Talked to Claus, the lower graph is bone stock and the higher graph with with chip and kleemann pipe.
Last edited by janusgrimnitz; 07-13-2013 at 12:45 AM. Reason: Answer from Kleemann
#28
i have been using the TMC box for my c250CGI for few months and try different dial, don't feel any change of power and fuel consumption........i'm trying to switch to kleemann but worry they are the same
#29
MBWorld Fanatic!
Thread Starter
Join Date: Mar 2006
Location: Hong Kong
Posts: 1,375
Likes: 0
Received 16 Likes
on
15 Posts
2010 C200 CGI
If you can afford the Keleman then go for it, at least they are veterans in modding Benz. The normal setting is 6, you didn't feel any change? It's possible to use a higher dial but not recommended. You may need to check if you have the proper map if you don't feel any difference.
#30
hi Knightmare69, i have try others from 7-9......but not much change, did 0-62 with tmc or without it time are almost the same......... how can i make sure they have the proper map on it??
kleemann is kind of expensive, that's why i need more research before ordering it
kleemann is kind of expensive, that's why i need more research before ordering it
#31
MBWorld Fanatic!
Thread Starter
Join Date: Mar 2006
Location: Hong Kong
Posts: 1,375
Likes: 0
Received 16 Likes
on
15 Posts
2010 C200 CGI
If you look at my dyno and the discussion we had, the conclusion is most of these power boxes will add power but not really lower your times. The power added is more about usable low end power. I tried 7 and the dyno graph was scary the way power came out, it was all over the place. I would keep it at 6 max. You can email TMC and ask them about how to check the software on your unit.