Sorry for going mia guys had some stuff to take care of. But the hotbits coils are on the car and they're great, much much lower than the KW V3s i previously had, PLUS I haven't even lowered the coilovers past half. Theres still some small modifications that need to be done but that'll be taken care of by August 18th roughly. Here's the info i poster before in regards to pricing and details. I know a few of you were interested before.

**************************
We will build monotube performance dampers that can be serviced in 3 US locations and 2 Canadian locations. This is for revalve, tuning, or the rare leak. We have 5 service centres capable of taking the dampers apart and tuning them. We specialize in performance and handling. Our biggest market is racing…..all kinds. Rally, Drag, Drift, Track, Targa, we have customers winning in all these areas.

I have the following pricing, this is for dampers with bodies shortened 50mm. That’s over 2 inches of body drop without loosing travel on the damper, only lowering it further would start to shorten your compression stroke.

DT1 single adjustable dampening monotube dampers. Front threaded body, rear would have separate threaded replacement spring seat all for ride height. DT1 effects bounce and rebound with a single adjustment. 40 positions. Regular price $1707cdn $1650us
DT1 kit with remote canister reservoir $1995cdn $1926us
DT2 double adjustable dampening kit. Same as DT1 but with separate control of bounce (30 positions) and rebound (40 positions), remote canisters required and included. $ 2284cdn $2203us

There are price differences between Canada and the US because of import duties and taxes. Included in the above pricing is $275 courier delivery direct from the TUV German certified factory in Malaysia.
If you can get together a group buy we will give 20% off prior to shipping for 5 orders or more. If you want everything quickly and direct, then the $275 shipping cost will still be the same. If you are not in a rush, shipping can be cut down to $100 per set if we do a sea freight shipment and then disburse via ground courier once landed. Sea takes 6 to 8 weeks shipping time. Courier is 3-4 days.
So with courier shipping, pricing for group buy would be.
DT1 kit $1420cdn $1375us
DT1 canister kit $1651cdn $1596us
DT2 canister kit $1882cdn $1817us

We can build pillow ball mounts front and rear if desired. Additional charges for these.
******************************************
I'll post some pictures below of the coilovers and how they look on the car.

 

Guys take this in..at the current ride heigh with only half the coilover down, my front wheel in the last picture can not turn. It will literally pop the fender off. That's how low these coils can go

 

i think I'm going to pick these up for next spring

 

when are we going to be able to purchase these bad boys

 

PLEASE PLEASE PLEASE LET US KNOW WHEN WE CAN PURCHASE THESE MY 4MATIC IS READY!!!!!!!!!!!!!!!!!!

 

hey guys, everything should be ready within this month. But i do need a solid 5 buyers to get the right pricing and to get these made in bulk. Anyone interested in setting up a group buy for these, i've never done it before so I'm not to sure how to go about with it.

 

im in for the group buy, im also located in toronto if that makes anything easier

 

any news?

 

I am also interested! Let me know when they are available..

 

Yeah I'm just gonna assume this isn't gonna happen because it's been like 3 months already smdh

 

I take it this is not going to happen??