hello from the uk!
#1
Newbie
Thread Starter
hello from the uk!
good evening everyone
i have recently bought myself an 09 w204 c350 cdi.
i have an issue with the car not revving past 3000rpm.
i work at a top independent mercedes garage and breakers yard so i have had the car on star and i have a fault code of P010b which is an air mass fault. i have fitted a new air mass and still has the same issue and fault code.
the next thing i have seen is the resistor mod for the swirl flap motor. i did that today and nothing has changed.
the mercedes trained mechanics at my work wont look deeper i to my car as i have had it stage 1 remapped with egr and dpf delete and also fitted some k&n panel filters.
is there anything else that anyone could suggest i do?
thanks for your time reading and i hope someone can help
i have recently bought myself an 09 w204 c350 cdi.
i have an issue with the car not revving past 3000rpm.
i work at a top independent mercedes garage and breakers yard so i have had the car on star and i have a fault code of P010b which is an air mass fault. i have fitted a new air mass and still has the same issue and fault code.
the next thing i have seen is the resistor mod for the swirl flap motor. i did that today and nothing has changed.
the mercedes trained mechanics at my work wont look deeper i to my car as i have had it stage 1 remapped with egr and dpf delete and also fitted some k&n panel filters.
is there anything else that anyone could suggest i do?
thanks for your time reading and i hope someone can help
The following users liked this post:
lawsond1985 (04-04-2023)
#6
Super Member
If a new MAF sensor didn't fix it, I'd start looking for a faulty wiring connection, broken wire or a vacuum leak
You can check this out for suggestions: OBD Codes - P0101
Also take a look at this thread: Potential Fix
You can check this out for suggestions: OBD Codes - P0101
Also take a look at this thread: Potential Fix
Last edited by EuroDriverSD; 04-04-2023 at 07:41 PM.