How clear maintenance message
Thread Starter
Member
Joined: Jan 2023
Posts: 96
Likes: 6
From: Christiansburg, VA
2014 C250 Sport class
How clear maintenance message
I keep getting a message telling me that I am overdue for scheduled maintenance. Because of cost and a lack of proximity to the dealership I did everything listed for the maintenance. But I cannot get the message to clear and I cannot find a mechanic that can. Am I doomed to a trip to the dealership or is there another way to clear it?
MBWorld Fanatic!
Joined: Aug 2023
Posts: 3,854
Likes: 1,182
From: MA Coast
W204 2010 C300 4matic Sport M272
just follow the instructions in this article. Its easy.
- Turn key to position 1.
- press back button on steering wheel until it shows "trip menu" on dash.
- Press "call" button and then "ok" button and hold for 5 seconds.
- Workshop menu should pop up on dash. Scroll thru do reset service reminder.
https://mbworld.org/how-tos/a/merced...e-light-388322
- Turn key to position 1.
- press back button on steering wheel until it shows "trip menu" on dash.
- Press "call" button and then "ok" button and hold for 5 seconds.
- Workshop menu should pop up on dash. Scroll thru do reset service reminder.
https://mbworld.org/how-tos/a/merced...e-light-388322
Last edited by TimC300; Feb 20, 2024 at 03:17 PM.
Out Of Control!!
Joined: Apr 2019
Posts: 12,166
Likes: 6,883
From: Silicon Valley
W212 MY'14 M276-3.5NA @75kMi
display menu options
just follow the instructions in this article. Its easy.
- Turn key to position 1.
- press back button on steering wheel until it shows "trip menu" on dash.
- Press "call" button and then "ok" button and hold for 5 seconds.
- Workshop menu should pop up on dash. Scroll thru do reset service reminder.
https://mbworld.org/how-tos/a/merced...e-light-388322
- Turn key to position 1.
- press back button on steering wheel until it shows "trip menu" on dash.
- Press "call" button and then "ok" button and hold for 5 seconds.
- Workshop menu should pop up on dash. Scroll thru do reset service reminder.
https://mbworld.org/how-tos/a/merced...e-light-388322
This special keypress combination is also how to display the batt. voltage on Dasboard while driving.
This procedure needs to be carried out BEFORE engine start.
