Hi guys,
just got a 2015 cpo c300 sedan last week. Today I was looking for tire pressure display but couldn't find any. I went to service menu then tire pressure but all I see a message to reset the tire pressure and no individual tire pressures. I thought it was a standard feature? Am I missing this feature or need to change some settings?

 

You only get the tyre pressure reading when the car is or has been travelling and the ignition has not been switched off.......so looking from a cold start nothing shows. Check the menu when.out on a run.

 

Not sure where you're from but in Canada C300 don't have individual TPMS. It's the ABS sensor that senses a slower rotating tire compared to the rest. It won't tell you which tire though. The C43/63 has individual tire pressure sensors.

 

Thanks for the replies guys. Yes I am from Canada and that explains why I dont see it. Thanks again. So it means I can replace run a flat with regular tires with fix a flat kit without worrying about tpms sensor damage?

 

Ah i am in france where we do have tpms. It is useful sorry you are denied.

 

Hi All,
I am having a similar issue accessing the individual tire pressures on my E350 W211 2007 model (when the ignition is on or on accessory position), by pressing the left or right arrow keys on the steering wheel menu, however no 'Service' option comes up. I have tried several times pressing the other menu buttons, however no 'Service' option comes up in order to access the 'Tire Pressures' to see the individual tire pressures of my car. As recommended above, I have

This function should work on this model, at least that is what it says in the manual.

I would greatly appreciate any advice on how to access the the individual tire pressure monitoring system through the on board computer?

Thank you in advance.

 

^^ not an answer to your question but if you have MercedesMe, it will display the tyre pressures.

HTH

 

On me car, it tells me that Tire Pressure will show after the car has been driving around for a few minutes.

 

Thanks. You mean the MercedesMe App?

 

I tried accessing the 'Tire Pressure' option after driving the car for an hour, even stopping on the side of the road during the drive to see if I could access it, but there doesn't seem to be any option to access the individual tire pressures.

 

Looks like you have the standard tire monitoring system and not the separate tire function option. Your system is like my W204 which just looks at the ride height and determines if their is air loss.

 

As Cosworth2000 said, you most likely don't have individual TPMS inside each tire, otherwise the tire pressure readings will show up after only a few minutes of driving.

 

Yes. Apologies for the late reply.

 

I have a second set of OEM wheels, with the TPMS sensors. Is there a way to activate the functionality in the car ? I have a Canadian C300, so it does not use TPMS with sensors. Is there a way to activate trough the Engineering menu somehow ?