If anyone is needing the V35 update, you can find it here for 7 days from 19-02-2019:
https://fil.email/uPZ3O0UZ
https://transferxl.com/08v8Bs4Nkx7Pc
https://www.plustransfer.com/downloa...3b3b0acb47f0c6

https://megaupload.nz/ZbMd00ufb3/10....5_20190104_zip


What is included (10.25 - 1280x480 - dated 2019-01-04):
- UI upgrade: 3562.bin + 3562.upd
- MCU upgrade: ts24x.bin
- CAN upgrade: can_app.bin
- Boot animation update: bootanimation.zip
- Installation guide: HOW TO.jpg

Update at your own risk and enjoy...

 

V36 - 4G_UI02-2-1280x480_v36_20190221_8.1
https://nofile.io/f/jqz1mn0y5ap/36.rar

 

Do you mind telling me how can I do the update, and does my display suitable to do so? Thanks a lot

 

The guide for updating is included in the file

 

Thanks for your reply, but I find my system isn’t the same, although the hardware is the same 😅

 

Ow I see. I'm not sure how to update that.
I think you should contact your vendor for an update...

 

What's new with the update?

 

Are all 10.25 screens the same or is this for a specific model? How can they share the same firmware?

 

Hi there, can you please re-up the link, link has died

Many thanks

One more thing, on my android head unit, I can't access boot logo in setting > General > [code 5678]

thanks so much

 

Here is version 3,6
http://www.mediafire.com/file/3j4be5...36_RT.rar/file

Here is V35
Version 35

 

Thanks so much.
One more thing, could you please help me to make a boot animation on this video

and is there any way to remove android boot logo

I got one problem, I can't access "boot logo" in setting > general > boot logo "code 5678", it is not showing anything

many thanks

 

Here is the boot animation
Also with instructions how to install

 

Thank you for providing the update. After the update i have one problem: The sound from the display comes from the left speaker, also when the car radio is on. When i switch to the usb dongle for listening musik the sound comes from everywhere and also extra from the left speaker.
Can someone tell me how to fix this?
Thanks
Pascal

 

Sorry I don't.
Although I know there is a V41 out right now...

 

Hm where can i get V41? Maybe this issue is depending on the can update? Do you have another can update file?

 

Hello,




I am sorry to take your time guys. I hope someone can help me. I have purchased a 10.25 Android unit for my W205 in UK. All works fine but when I try to make a phone call using the BT from the unit I get an annoying noise coming out the left speaker but only when the car is in motion. This also happen when the Sat Nav tries to give me vocal directions. I am not sure why this is happening. However I feel this is the right place to ask. Any help is much appreciate it. This is a link that records the issue.


https://www.dropbox.com/s/sjy8qzhdk4...50.00.mp4?dl=0





Many thanks

 

Looking for v41 also if anyone has it, updated UI looks interesting.... cheers

 

Here is V41.

It seems only to be the UI.
Not the MCU and/or CAN.
Not tested though.

"4G core channel UI new Mercedes-Benz v1280x480-2- foreign _v2_20190702"
https://mega.nz/#!dAAxTKSY!Or-M30PFa...sGj70mRrLz5w0o

If any of you test it please comment here ☺️

 

-

 

Thanks for the file, just one other thing how do you update exact;y? 🤣🤷🏼*♂️ , once I get chance then I ll try doing it and see what it’s like.

thanks again.

 

Instructions are included in pdf file

 

Well updated .... liked the look of to be fair it but my CarPlay dongle doesn’t work now , if I can’t firgure out why I’m hoping I can downgrade it back to the previous interface
Don’t happen to have those files aswell do you plz so I can do that ..?
Hope I can fix the CarPlay one way or the other... main thing I use !

cheers

 

I still have the V36 files

I have received MCU and CAN update files as well.
Don't know if they are updated also or if it is only UI that has been updated

 

Here are the "complete" V41 update including UI, MCU and CAN:
https://transfernow.net/54ap8712ina2


As always: update at your own risk.
Happy updating....

 

Happy to say CarPlay up and running... after updating the UI I lost all my downloaded apps from the play store and I lost the apk for CarPlay so have had to find the correct one again to load back (I had more than one and was loading the incorrect one thus._)
will probably stay with the new look ...one thing I can’t seem to do is press the screen to be able to change wallpaper etc like I could previously,not sure why that is but when I press anywhere on the screen it always activates one of the symbols to a particular function.
Managed to load live wallpaper still tho by just downloading again one I was using and loading it ,it automatically changed to it then.
Will continue to play about with it but most my time so far was taken up by getting CarPlay running again and then changing the background.