When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I hit something on the way home, heard a clunk, and arrived home to find that my driver's side headlight plastic covering was busted up pretty good. Lights all still work. I'm assuming the plastic cover can't be replaced? That I need a whole new assembly? Anyone know what part number this is? Cursory searches online are not showing me results that look like my headlight does. It's a 2019 C-300 4Matic with LED Headlamps.
P
Pulled this off the back of the light? Best I could see. Confusing part numbering! 2059065504 brings up what looks like my light. Your number does as well....and now this... Thanks for your input.
PFL205.064 with M276.823 (Oil pump solenoid defeated)
Originally Posted by Eric Schott
P
Pulled this off the back of the light? Best I could see. Confusing part numbering! 2059065504 brings up what looks like my light. Your number does as well....and now this... Thanks for your input.
No problem. I would stick with the exact part number shown on the broken light you have though as it came with your car so no doubt it is the right one. I didn't know what country were you from and the north american ones have the amber side marker to meet regulations therefore would have different part numbers. On top of that, the left and right head lamps both have separate part numbers for obvious reasons.
From your picture, it says A2059068305
Last edited by W205C43PFL; 11-25-2021 at 10:07 PM.
PFL205.064 with M276.823 (Oil pump solenoid defeated)
Originally Posted by Eric Schott
Can the lens cover be purchased and replaced? The light is working fine, just a cracked lens cover....
Yes it is possible but they don't ever come as OEM. So you have to go aftermarket, for example, however I never used this site so I am not sure if it is trusted. http://www.headlight-headlamp.com/Me...placement.html
PFL205.064 with M276.823 (Oil pump solenoid defeated)
Here's another seller it says OEM quality on the site but it is aftermarket (again I am not sure if this site is trusted neither have I ever used them before, if you do proceed to go with them make sure to ask them if it fits the facelift because for some reason I couldn't find an option for the facelift from this particular seller): https://www.bimmerjakes.com/en/merce...eft_right-pair
Last edited by W205C43PFL; 11-25-2021 at 10:18 PM.
One web site hasn't been updated since 2015 and is not https. The other does not carry the facelift lense....
I can't believe there aren't more options to purchase/find the lense for this....
Maybe the facelift was just an LED setup, but with the same form factor and the pre-facelift? They could have just updated the light without doing additional body work right?
Found a replacement light on ebay. $400 bucks. Perfect condition. Was able to swap it out with my broken one, transfer the computer board so no programming needed. Did it in about an hour.
11-25-2021, 08:37 PM
