AMS performance enters the Mercedes World: An Introduction
#1
Former Vendor of MBWorld
Thread Starter
AMS performance enters the Mercedes World: An Introduction
First and foremost thank you for taking the time out to read this. AMS Performance is a forced induction specialist that opened its doors a little over 10 years ago. In that time we have made major advancements and developments in the forced induction field.
Some of our more recent endeavors include the ALPHA GT-R performance packages www.alphagtr.com where we have pioneered several parts, packages and even broken a few records along the way.
![](https://www.google.com/url?source=imglanding&ct=img&q=http://www.gtrinformation.com/wp-content/uploads/2010/09/ams-alpha.jpg&sa=X&ei=OdcET6DFKIGBgweU5dGWAg&ved=0CAwQ8wc&usg=AFQjCNHVSFIrRoSl0lXheKX8AXvLIL6pcQ)
Below are some videos of ALPHA GT-R's in action
Worlds Quickest and Fastest R35 GT-R. AMS ALPHA 12
<iframe width="560" height="315" src="http://www.youtube.com/embed/FnpMe_8qvKI" frameborder="0" allowfullscreen></iframe>
Worlds fastest standing mile GT-R
http://youtu.be/15fBLAS2P64
First 9 second pump gas GT-R
http://youtu.be/bapuJYBRCIk
Enough with the GT-R though. The purpose of this thread is to announce our entrance into the Mercedes world. Just recently we picked up a new 2012 E63 AMG:
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_E63_AMG_03.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_E63_AMG_02.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_E63_AMG_04.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_E63_AMG_05.jpg)
For those unfamiliar with AMS and what we do please allow me to give you a brief breakdown.
Unlike other tuning shops AMS is full service tuning facility and Part manufacturer. Just about every part that bears the AMS or ALPHA name is made right here in house at AMS.
Shop Tour Video:
http://youtu.be/K_tqa0CaOM0
We have a team of 30 highly skilled industry professionals. The best of the best in the industry!
Our in house engineering department is state of the art. We have the equipment to go from concept to design to finished part all inside these walls.
Below is sample of our GT-R turbo kit during the design process:
From Cad design using our CMM Arm
![](http://amsperformance.com/amsperformanceimages/16/AMS_Nissan_GT-R_CAD_1-13-09_2.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Nissan_GT-R_CAD_1-13-09_3.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Drivers_Side_Header_9.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Drivers_Side_Header_5.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Drivers_Side_Header_7.jpg)
To Rapid prototype using our 3D printer:
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Cast_Header_Prototype_Model_4.jpg)
![](http://amsperformance.com/amsperformanceimages/16/Turbo%20Header%20Install_AMS_Tims_Nissan_GT-R_Full_Turbo_Kit_Mock_Up_2.jpg)
![](http://amsperformance.com/amsperformanceimages/16/Turbo%20Header%20Install_AMS_Tims_Nissan_GT-R_Full_Turbo_Kit_Mock_Up_3.jpg)
To first casted samples:
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Engine_Build_2_500x375.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Engine_Build_3_500x375.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Engine_Turbo_Kit_Build_05.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Engine_Turbo_Kit_Build_06.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Engine_Turbo_Kit_Build_03.jpg)
And finally to finished product:
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Alpha_10_GT-R_Gun_Metal_08.jpg)
We pride ourselves on OEM quality, fit and finish. We believe a product should fit just as well or better than the stock component you are taking off...after all if you are upgrading shouldn't you upgrade ALL attributes of the component.
AMS Engineering Video:
http://youtu.be/MU1od1_kx5g
When it comes to tuning we have you covered too. We not only offer tuning solutions for just about every car but we also do it all under our roof. We have two full time calibration specialists and two AWD dyno's allowing us to accommodate just about any customers need.
![](http://amsperformance.com/amsperformanceimages/16/IMG_9576.jpg)
We really are a ONE stop shop for ANY of your performance needs.
So please stay tuned as we start developing performance packages for the 5.5L Twin Turbo Mercedes platforms and others.
Thank you again for taking the time to read and for considering AMS Performance.
Eric
Some of our more recent endeavors include the ALPHA GT-R performance packages www.alphagtr.com where we have pioneered several parts, packages and even broken a few records along the way.
![](https://www.google.com/url?source=imglanding&ct=img&q=http://www.gtrinformation.com/wp-content/uploads/2010/09/ams-alpha.jpg&sa=X&ei=OdcET6DFKIGBgweU5dGWAg&ved=0CAwQ8wc&usg=AFQjCNHVSFIrRoSl0lXheKX8AXvLIL6pcQ)
Below are some videos of ALPHA GT-R's in action
Worlds Quickest and Fastest R35 GT-R. AMS ALPHA 12
<iframe width="560" height="315" src="http://www.youtube.com/embed/FnpMe_8qvKI" frameborder="0" allowfullscreen></iframe>
Worlds fastest standing mile GT-R
http://youtu.be/15fBLAS2P64
First 9 second pump gas GT-R
http://youtu.be/bapuJYBRCIk
Enough with the GT-R though. The purpose of this thread is to announce our entrance into the Mercedes world. Just recently we picked up a new 2012 E63 AMG:
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_E63_AMG_03.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_E63_AMG_02.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_E63_AMG_04.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_E63_AMG_05.jpg)
For those unfamiliar with AMS and what we do please allow me to give you a brief breakdown.
Unlike other tuning shops AMS is full service tuning facility and Part manufacturer. Just about every part that bears the AMS or ALPHA name is made right here in house at AMS.
Shop Tour Video:
http://youtu.be/K_tqa0CaOM0
We have a team of 30 highly skilled industry professionals. The best of the best in the industry!
Our in house engineering department is state of the art. We have the equipment to go from concept to design to finished part all inside these walls.
Below is sample of our GT-R turbo kit during the design process:
From Cad design using our CMM Arm
![](http://amsperformance.com/amsperformanceimages/16/AMS_Nissan_GT-R_CAD_1-13-09_2.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Nissan_GT-R_CAD_1-13-09_3.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Drivers_Side_Header_9.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Drivers_Side_Header_5.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Drivers_Side_Header_7.jpg)
To Rapid prototype using our 3D printer:
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Cast_Header_Prototype_Model_4.jpg)
![](http://amsperformance.com/amsperformanceimages/16/Turbo%20Header%20Install_AMS_Tims_Nissan_GT-R_Full_Turbo_Kit_Mock_Up_2.jpg)
![](http://amsperformance.com/amsperformanceimages/16/Turbo%20Header%20Install_AMS_Tims_Nissan_GT-R_Full_Turbo_Kit_Mock_Up_3.jpg)
To first casted samples:
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Engine_Build_2_500x375.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Engine_Build_3_500x375.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Engine_Turbo_Kit_Build_05.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Engine_Turbo_Kit_Build_06.jpg)
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Nissan_GT-R_Engine_Turbo_Kit_Build_03.jpg)
And finally to finished product:
![](http://amsperformance.com/amsperformanceimages/16/AMS_Performance_Alpha_10_GT-R_Gun_Metal_08.jpg)
We pride ourselves on OEM quality, fit and finish. We believe a product should fit just as well or better than the stock component you are taking off...after all if you are upgrading shouldn't you upgrade ALL attributes of the component.
AMS Engineering Video:
http://youtu.be/MU1od1_kx5g
When it comes to tuning we have you covered too. We not only offer tuning solutions for just about every car but we also do it all under our roof. We have two full time calibration specialists and two AWD dyno's allowing us to accommodate just about any customers need.
![](http://amsperformance.com/amsperformanceimages/16/IMG_9576.jpg)
We really are a ONE stop shop for ANY of your performance needs.
So please stay tuned as we start developing performance packages for the 5.5L Twin Turbo Mercedes platforms and others.
Thank you again for taking the time to read and for considering AMS Performance.
Eric
Last edited by AMS_Performance; 01-05-2012 at 09:19 AM.
Trending Topics
#12
Former Vendor of MBWorld
Thread Starter
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
We should have some base line #'s on the E63 posted later today and if the schedule allows we'll be tuning within the next 2 weeks.
#13
MBWorld Fanatic!
Awesome!
So what kind of goals are you setting for this platform?
So what kind of goals are you setting for this platform?
#14
Former Vendor of MBWorld
Thread Starter
#15
Considering what I currently drive and the fact that I've been an EvoM member for 5+ years I can say welcome to the forum, AMS!
When I came over I was a bit dissapointed at the "Quickest/Fastest" list since Evo's run 9's on stock block and street trim, 8's in street trim and built internals/weight reduction!
Hopefully you can get the AMG's somewhere in that ballpark but I do realize it'll be a challenge.
When I came over I was a bit dissapointed at the "Quickest/Fastest" list since Evo's run 9's on stock block and street trim, 8's in street trim and built internals/weight reduction!
Hopefully you can get the AMG's somewhere in that ballpark but I do realize it'll be a challenge.
#16
Are you looking at possibly working with Haltech or AEM to get an EMS put on the car? If not, what will you be using as a tuning solution?
#17
Senior Member
Join Date: Mar 2008
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
2012 E63 PP, 2012 Ferrari 458, 2012 Boxster S
Will definitely be following your progress.
Ken
#18
Out Of Control!!
Yes!!!!!! AMS finally getting into benzes. Can't wait to see what you guys come up with. You guys build some killer cars. I bet AMS will eat renntech for breakfast haha
#19
Super Moderator
Wow...never thought you guys would swing over to the benz side. ![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
I'm glad you did! With all your achievements with the JDM market, I can't wait to see what you do with the 55TT motor!
Subscribed!!!
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
I'm glad you did! With all your achievements with the JDM market, I can't wait to see what you do with the 55TT motor!
Subscribed!!!
![Popcorn](https://mbworld.org/forums/images/smilies/popc1.gif)
#20
Administrator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 796 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
Hey guys- this is a sponsor's welcome thread, get out of here if you are going to muddy it up.
Start your own thread if you have a factual or beneficial opinion that will benefit us all. Thanks.
AMS- Im gonna clean up this thread a little so you may not understand why I posted this.
Start your own thread if you have a factual or beneficial opinion that will benefit us all. Thanks.
AMS- Im gonna clean up this thread a little so you may not understand why I posted this.
#21
MBWorld Fanatic!
Hey guys- this is a sponsor's welcome thread, get out of here if you are going to muddy it up.
Start your own thread if you have a factual or beneficial opinion that will benefit us all. Thanks.
AMS- Im gonna clean up this thread a little so you may not understand why I posted this.
Start your own thread if you have a factual or beneficial opinion that will benefit us all. Thanks.
AMS- Im gonna clean up this thread a little so you may not understand why I posted this.
![word](https://mbworld.org/forums/images/smilies/werd.gif)
Can't wait to see some huge numbers come out of that E63!
Is that a non-performance pack car?
Do you have the factory LSD?
Just curious
Last edited by callmiro; 01-10-2012 at 08:36 PM.
#22
MBWorld Fanatic!
![](https://mbworld.org/forums/images/ranks/veteran_army.png)
Join Date: Apr 2006
Location: Central New Jersey
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
CLK63 Black, E350 Wagon, Supercharged Denali, Lotus Elise, Tesla Model 3 Dual-Motor.
AMS,
You know what they say....
"Once You Go Benz You'll Never Go Back"
I've got a few of their parts on my EVO...![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Jim
You know what they say....
"Once You Go Benz You'll Never Go Back"
I've got a few of their parts on my EVO...
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Jim
#23
Junior Member
Join Date: Oct 2011
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
SL63 CLS63 GTR33 Escalade
Nice ![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
thanks god i didnt order the downpipes, i guess ill just have to wait for 3 more month and choose from the best...![drive](https://mbworld.org/forums/images/smilies/driving.gif)
good luck AMS with those new monsters we hope to see a new German Godzilaa on the road soon
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
thanks god i didnt order the downpipes, i guess ill just have to wait for 3 more month and choose from the best...
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
good luck AMS with those new monsters we hope to see a new German Godzilaa on the road soon
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
#25
Junior Member
Join Date: Oct 2011
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
SL63 CLS63 GTR33 Escalade
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
Nice, 2.75 !! isnt that a bit loud!!
did you have welding when fitting it, coz the one i was going to order is a stansteel stright fit engineered in AMG workshop
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
![devil](https://mbworld.org/forums/images/smilies/devil.gif)
AMS please update us with your products
![drive](https://mbworld.org/forums/images/smilies/driving.gif)