*****Bone stock CLS55 with MBH Longtube headers Dyno Inside*****
#1
Former Vendor of MBWorld
Thread Starter
*****Bone stock CLS55 with MBH Longtube headers Dyno Inside*****
People have been wondering what My long tube headers make for power on a stock 55k AMG. The wait is over. After begging my brother to let me use his car to fit and test a set of MBH/Dyno-Comp Long Tube headers. The results are in!
My brothers CLS55 (hoolamoster, yes he is my brother) runs quite rich from the factory at 10:1 AFR after being fitted with MBH headers and cat test pipes. Secondary cats still intact. the car consistently laid down about 50whp and 45wtq more than his stock baseline. The AFR leaned out to about 10.5:1. Still rich, But I guess that what MBZ factory gave him.
I feel very confident if my headers and test pipes dont make at least 40+whp. send them back for a full refund.
Here is the dyno chart and a quick video, more for sound than anything.
![](http://i358.photobucket.com/albums/oo26/hoolcat/CLS55MBHheaders.jpg)
video
http://www.youtube.com/watch?v=iaXa_o-fO6Q
My brothers CLS55 (hoolamoster, yes he is my brother) runs quite rich from the factory at 10:1 AFR after being fitted with MBH headers and cat test pipes. Secondary cats still intact. the car consistently laid down about 50whp and 45wtq more than his stock baseline. The AFR leaned out to about 10.5:1. Still rich, But I guess that what MBZ factory gave him.
I feel very confident if my headers and test pipes dont make at least 40+whp. send them back for a full refund.
Here is the dyno chart and a quick video, more for sound than anything.
![](http://i358.photobucket.com/albums/oo26/hoolcat/CLS55MBHheaders.jpg)
video
http://www.youtube.com/watch?v=iaXa_o-fO6Q
#5
Former Vendor of MBWorld
Thread Starter
On a modded E55 my headers made 50whp over the renntech headers it had on it before.
When I was talkign with my brother yesterday morning He asked "How much power do I think they will make?" I said, "About 30whp." When dynoing came around. and the first run was in progress. I watched that 30whp mark come and go. Being a fan of all things power. I was like "Holy crap." Not only did it blow my expectations away. It was able to repeat the same power gains run after run.
This is why I feel so confident now to offer a 100% money back garentee if you dont make 40 or more whp over the stock manifolds.
When I first set out to make headers I was very spacific about wanting top end power. You can search my past post were i state this. After some ajustments a bit of trial and error.. We are there.
These cars have all the torque in the wolrd, I felt from racing we needed more power up top. These cars always seem to cross the traps at the top of 3rd gear. So why not make a header that can get you to big peak power as you cross the line.
Needless to say I'm very excited about being able to offer fellow HP junkies something that does what it is saposed to do.
When I was talkign with my brother yesterday morning He asked "How much power do I think they will make?" I said, "About 30whp." When dynoing came around. and the first run was in progress. I watched that 30whp mark come and go. Being a fan of all things power. I was like "Holy crap." Not only did it blow my expectations away. It was able to repeat the same power gains run after run.
This is why I feel so confident now to offer a 100% money back garentee if you dont make 40 or more whp over the stock manifolds.
When I first set out to make headers I was very spacific about wanting top end power. You can search my past post were i state this. After some ajustments a bit of trial and error.. We are there.
These cars have all the torque in the wolrd, I felt from racing we needed more power up top. These cars always seem to cross the traps at the top of 3rd gear. So why not make a header that can get you to big peak power as you cross the line.
Needless to say I'm very excited about being able to offer fellow HP junkies something that does what it is saposed to do.
Trending Topics
#10
MBWorld Fanatic!
Very Nice! This is why I've always said that if I ever decide to mod my car I will address the exhaust 1st. You add hp without touching the engine. On average a pulley and tune would get you about 50hp &50ftlb's with added heat. I know that these headers are expensive but I believe/know that they are worth every penny. Hmmm 125mph traps with a stock engine and exhaust mods only????
#11
No tune on my car, this is bolt on and go... The power gains are as impressive on the chart as well as on the pavement! So much more pull in 3rd its like 1st through 3rd is one gear ; D
#12
Senior Member
Join Date: Feb 2008
Location: Long Island, NY
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
06 CLS55 AMG
Question... with the elimination of the primary cats, how will the car fare when it comes to an annual state inspection? I know from previous experience with vehicles with "test pipes" (removed cats) and even those just running the secondary cats (primaries removed), passing a state inspection was near impossible...
Are these headers "street legal" or are they being marketed as a "race only" modification?
Are these headers "street legal" or are they being marketed as a "race only" modification?
#13
Banned
Join Date: May 2009
Location: D.C. METRO AREA
Posts: 971
Likes: 0
Received 1 Like
on
1 Post
CLS55 AMG
Question... with the elimination of the primary cats, how will the car fare when it comes to an annual state inspection? I know from previous experience with vehicles with "test pipes" (removed cats) and even those just running the secondary cats (primaries removed), passing a state inspection was near impossible...
Are these headers "street legal" or are they being marketed as a "race only" modification?
Are these headers "street legal" or are they being marketed as a "race only" modification?
#14
Former Vendor of MBWorld
Join Date: Jan 2007
Location: Glendale Arizona
Posts: 3,193
Likes: 0
Received 2 Likes
on
2 Posts
C55,SL55,C63
Question... with the elimination of the primary cats, how will the car fare when it comes to an annual state inspection? I know from previous experience with vehicles with "test pipes" (removed cats) and even those just running the secondary cats (primaries removed), passing a state inspection was near impossible...
Are these headers "street legal" or are they being marketed as a "race only" modification?
Are these headers "street legal" or are they being marketed as a "race only" modification?
As for some other questions. This is the only mod on this car. No ECU tune or anything. Surprisingly he has not gotten a CEL for emissions yet from running "Test Pipes" and no software to turn the back o2 sensors off.
#15
MBWorld Fanatic!
Join Date: Mar 2007
Location: Sherman Oaks, CA
Posts: 1,137
Likes: 0
Received 4 Likes
on
4 Posts
06 CLS55 w/ P030, 05 Jag S Type R, 05 TBird-68 Dodge Charger R/T-440 w/4speed I'm original owner
Before headers dyno indicates about 411 HP. Sounds somewhat high over over a typical 55 which dynos at approximately 385 HP or so.
I don't think the delete of the primary cats yields 25 HP.
What's up?
I don't think the delete of the primary cats yields 25 HP.
What's up?
#17
My car dyno'd very high stock, we thought there may have been software on the car. However, we checked it and it was the factory MB file. Its just a strong car... and the funny story is everyone said this car will put down 380 and when it went well above and beyond that we where all blown away ; D