Hood Louvers
11-21-2005, 05:14 PM
#1
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2005
Location: S.E. FLA.
Posts: 1,224
Likes: 0
Received 6 Likes
on
6 Posts
05 ML-500 , 03 CLK5.5 AMG has left the Garage
Hood Louvers
I got it finnally done !!! It was in the shop during 2 Hurricanes. man I thought It was a goner. But it made it back out . The hood needed some paint chips removed . I had wanted a C/F hood with the Louvers. But the group buy fell through. I know Neil tried. Well anyway I showed the shop what the C/F hood looked like with the Louvers. They said they could come close. Take Care PTE
11-21-2005, 05:25 PM
#4
MBWorld Fanatic!
Join Date: Aug 2002
Location: North Cuba/West Bimini
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
Cars and boats!
Originally Posted by PTE
East Coast , Stuart, above Jupiter/West palm Beach
Trending Topics
11-21-2005, 09:53 PM
#10
Senior Member
Join Date: May 2005
Location: Ponte Vedra, FL
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
'10 E63 AMG
Nice! And it won't chop your head off in a collision like the CF hood!! Hah!
Any moisture problems? How long did it take, and how much did it cost?
Any moisture problems? How long did it take, and how much did it cost?
11-22-2005, 03:15 AM
#11
MBWorld Fanatic!
Join Date: Jul 2004
Location: Diamond Bar & Anaheim, CA
Posts: 1,194
Likes: 0
Received 2 Likes
on
2 Posts
2003 C-Class Sportcoupe
Looks very nice with louvers. I'm having a black CF one made for my c-coupe. I'm always looking at examples for louvers on production cars. I like the Diablo SRT-6 hood louvers. I wish I could get a silver hexel tex fiberglass hood, but can't get large enough rolls. Shop says they need at least 60" roll to make the hood completely with one sheet. Hexel tex came in 50" roll... 
11-22-2005, 07:10 AM
#12
Member
Join Date: Dec 2003
Location: Stockholm, Sweden
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
C32, Durango R/T, 3200GT
I've only seen louvers once. I got a pic with my cell but the quality is crap.
Anyway, it looks even more awsome in reality than on image.
Nice mod!
Anyway, it looks even more awsome in reality than on image.
Nice mod!
11-22-2005, 02:51 PM
#13
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2005
Location: S.E. FLA.
Posts: 1,224
Likes: 0
Received 6 Likes
on
6 Posts
05 ML-500 , 03 CLK5.5 AMG has left the Garage
Hood louvers
Hi Folks:
No rain or moisture problems . I looked at this before I had the hood modified. All the exposed electrical connectors are of a weather pak style ?packard type. They have silicone ribbed connection seals & where the wires enter the back side , there is a silicone type .Quad or round ,with a hole sized for the wire going thru it. The Air cleaner Housing & the front panel that attaches to it , protects the top of the motor , ign coil modules and the poly vee / serpentine belt .
It took about 2 weeks , $365.00 for the paint & $700.00 to build the Louvers . They popped a mold off a Porsche engine Hood ? cover. Then use the screen from a office depot in/out , desk top mail /letter rack. I cut the opening in the heat / sound blanket . It is a 3 layers thick. The 2 outside are black fiber . The center is a open cell type of foam . I took it to a canvas shop to have a linen binding sewed around the open edges to seal them off from the rain. I figured that if it got wet , it would weigh a TON and droupe down. LOOK AWLFULL. Hope this helps . P/S I really traded the body shop Guy's ,my dads old Evinrude 9.9 hp outboard for the Job. He hasn't missed it either
No rain or moisture problems . I looked at this before I had the hood modified. All the exposed electrical connectors are of a weather pak style ?packard type. They have silicone ribbed connection seals & where the wires enter the back side , there is a silicone type .Quad or round ,with a hole sized for the wire going thru it. The Air cleaner Housing & the front panel that attaches to it , protects the top of the motor , ign coil modules and the poly vee / serpentine belt .
It took about 2 weeks , $365.00 for the paint & $700.00 to build the Louvers . They popped a mold off a Porsche engine Hood ? cover. Then use the screen from a office depot in/out , desk top mail /letter rack. I cut the opening in the heat / sound blanket . It is a 3 layers thick. The 2 outside are black fiber . The center is a open cell type of foam . I took it to a canvas shop to have a linen binding sewed around the open edges to seal them off from the rain. I figured that if it got wet , it would weigh a TON and droupe down. LOOK AWLFULL. Hope this helps . P/S I really traded the body shop Guy's ,my dads old Evinrude 9.9 hp outboard for the Job. He hasn't missed it either
11-23-2005, 08:06 AM
#15
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2005
Location: S.E. FLA.
Posts: 1,224
Likes: 0
Received 6 Likes
on
6 Posts
05 ML-500 , 03 CLK5.5 AMG has left the Garage
Carbon Fiber & kevilar ?
pshek:
I here all the big rolls of Carbon Fiber Have been sucked up by Air Bus,for their air planes
Traumadoc:
They will fit almost anything , the mold was popped off a rear engine hood of a Porsche. Call Paul @
Composite Body Tech Corp. They are in Ft. Lauderdale/Dania Bch. Not far from the Tri Rail Station. 954-929-7200
I here all the big rolls of Carbon Fiber Have been sucked up by Air Bus,for their air planes
Traumadoc:
They will fit almost anything , the mold was popped off a rear engine hood of a Porsche. Call Paul @
Composite Body Tech Corp. They are in Ft. Lauderdale/Dania Bch. Not far from the Tri Rail Station. 954-929-7200
Last edited by PTE; 11-23-2005 at 08:13 AM. Reason: more info
