Tuners In NH or MA for C32 AMG
#3
Super Member
Thread Starter
Join Date: Oct 2007
Location: New Hampshire
Posts: 830
Likes: 0
Received 1 Like
on
1 Post
2003 C32 AMG, 2003 E39 M5
I am looking into doing some performance upgrades to the car. I was first thinking of doing pulley's then I say you have a chip. How is the chip installed? Do you just send out your ECU to be re programmed. I am looking for the safest most cost effective way to get anouther 3050 HP out of the car.
i will of course need to look at a good set of tires to help with the added power. Cause as of now the car just breaks loose with e F1's that are worn in the middle.
Thanks
i will of course need to look at a good set of tires to help with the added power. Cause as of now the car just breaks loose with e F1's that are worn in the middle.
Thanks
#4
MBWorld Fanatic!
Join Date: Mar 2006
Location: Boston
Posts: 6,665
Likes: 0
Received 4 Likes
on
3 Posts
2004 C32 ///AMG
I am looking into doing some performance upgrades to the car. I was first thinking of doing pulley's then I say you have a chip. How is the chip installed? Do you just send out your ECU to be re programmed. I am looking for the safest most cost effective way to get anouther 3050 HP out of the car.
i will of course need to look at a good set of tires to help with the added power. Cause as of now the car just breaks loose with e F1's that are worn in the middle.
Thanks
i will of course need to look at a good set of tires to help with the added power. Cause as of now the car just breaks loose with e F1's that are worn in the middle.
Thanks
they can do your alignment too...
#6
MBWorld Fanatic!
Join Date: Mar 2006
Location: Boston
Posts: 6,665
Likes: 0
Received 4 Likes
on
3 Posts
2004 C32 ///AMG
raised HP/TQ to 400/400 from stock.
if I were to do it again, I'd get the Leading Edge pulley...185mm
http://www.letmotorsports.com/
#7
Super Member
Thread Starter
Join Date: Oct 2007
Location: New Hampshire
Posts: 830
Likes: 0
Received 1 Like
on
1 Post
2003 C32 AMG, 2003 E39 M5
So you did the pulley's and the flash? That must set you back in the seat
[
QUOTE=rlee02135;2487033]it was an ECU Flash, part of the Evosport Stage 1 kit...
raised HP/TQ to 400/400 from stock.
if I were to do it again, I'd get the Leading Edge pulley...185mm
http://www.letmotorsports.com/[/QUOTE]
[
QUOTE=rlee02135;2487033]it was an ECU Flash, part of the Evosport Stage 1 kit...
raised HP/TQ to 400/400 from stock.
if I were to do it again, I'd get the Leading Edge pulley...185mm
http://www.letmotorsports.com/[/QUOTE]
Trending Topics
#10
MBWorld Fanatic!
Join Date: Nov 2003
Location: MILFORD,CT
Posts: 1,067
Likes: 0
Received 4 Likes
on
4 Posts
E36M3 race car/Ferrari F355 GTS/1973 Mini 1275GT/Fiat Abarth/ML63/SLK55
my car was modded by Hew Stewart at speedteknik in norwalk. they have since closed doors now Hew has his own shop in my town milford, ct. He works on bmws, porsches and mercedes...and pretty much all cars. Hew is an ex speed world challenge racer and really know his stuff. he worked one nite on my car until 2am, to deliver it to me for a time trial the next day. he maintains my vehicles. he is highly recommended, a bit further away than you may like but worth the effort. google high speed motorsports you should find the phone # i don't think his website if up yet.