Corrosive

Will these work for the C32?

the wheels are 18x8.5 and the offset is +40

I am guessing they are not going to work... From the searches I need somthing like 37, but I have no idea how offset works.

Thanks guys

rlee02135

you can go down to about ET30...so it'll clear the brakes.

Corrosive

SO they will work? If so i just may pick some rims up.

rlee02135

it depends on the style of the wheel. you'll definitely need spacers, but I'm not sure what size.

Corrosive

That sucks. They are carleson 1/5's in 18x8.5

I have seen them on this forum before, and thought they looked good. I can get the full set of 4 in chipped chrome (needs new dip) for 250. Not a bad price if you ask me, lol.

FrankW

carlsson 1/5s are ET40. you'll need a 10-12mm spacer from Carlsson, but you can buy them wheels. same one robert has in his sig if it's the BE version.

Corrosive

They are a little different.

I really dont want to mess with spacers, I have had a wheel fall off while driving before, and I never want to mess with stuff like that again... very scary.

rlee02135

Mine are 18x8 and 18x9, ET35 all around. (no spacers)
Came off a W210.

c32AMG-DTM

Hey rlee,

you have Carlsson and iforged in your sig. - do you have sets of both? If so, I'm definitely jealous, as I drive around on my stock 17s... lol.

rlee02135

I actually have too many wheels. 4 sets that fit, and one set (stock 17's) that don't clear the brakes. Looking to get rid of a few sets...I'll never use them all.

http://www.mymbonline.com/forum/viewtopic.php?t=8169

FrankW

you are probably looking at the older 1/5 with the silver finish and polish lip then. almost all the Carlsson/Brabus/Lorinser wheels use their own spacer kit. there's nothing to worry about.

FrankW

just checked. the by 8 and by 9 in 18s came in ur offset. they are discontinued tho. now the sizes are all 8.5 and 10.

I'm running ET30 and ET28 on my 8 and 9 width btw. more aggressive.