Smoky Burnouts for all 203 owners
Thread Starter
MBWorld Fanatic!
Joined: Nov 2001
Posts: 2,332
Likes: 1
From: Bloomington, IN
1997 Toyota Tacoma 4x4
Smoky Burnouts for all 203 owners
I don't know if anybody outside of the dealer is aware of this, but the traction control can be completely disabled simply by use of the steering wheel buttons. Here's the low-down-
1. To start, the key must be removed from the ignition.
2. Insert the key and turn to position 1.
3. Immediately press and hold the trip odometer reset button until the instrument cluster beeps. There is no visual message, only an audio beep. Be patient, this takes around 40 seconds.
4. Press the lower menu button (it looks like two sheets of paper, the one with the writing in the background behind the blank one)
5. Press the up arrow button.
6. Press the "+" sign to disable the Traction System (turn "ON" test mode)
7. Start the engine, the traction system is now disabled.
To return to normal, remove the key and restart the engine. The traction control warning should no longer be in the cluster. If it is, shut the engine off and remove the key again. Then insert the key and turn to position 1. Note that the DYNO test screen is displayed immediately. Push the "-" button to enable the traction system (turn "OFF" test mode)
NOTE: When you first turn the key to position 1, ESP DYNO Test screen pops up, then after 1-2 seconds it may disappear while faults are displayed. If you weren't fast enough in pressing the "-" button before codes were displayed, just wait until all codes cycle by, then the ESP DYNO Test screen will reappear.
No, this doesn't work for any car but the 203, before you ask.
Enjoy, and I'm not buying you new tires!
1. To start, the key must be removed from the ignition.
2. Insert the key and turn to position 1.
3. Immediately press and hold the trip odometer reset button until the instrument cluster beeps. There is no visual message, only an audio beep. Be patient, this takes around 40 seconds.
4. Press the lower menu button (it looks like two sheets of paper, the one with the writing in the background behind the blank one)
5. Press the up arrow button.
6. Press the "+" sign to disable the Traction System (turn "ON" test mode)
7. Start the engine, the traction system is now disabled.
To return to normal, remove the key and restart the engine. The traction control warning should no longer be in the cluster. If it is, shut the engine off and remove the key again. Then insert the key and turn to position 1. Note that the DYNO test screen is displayed immediately. Push the "-" button to enable the traction system (turn "OFF" test mode)
NOTE: When you first turn the key to position 1, ESP DYNO Test screen pops up, then after 1-2 seconds it may disappear while faults are displayed. If you weren't fast enough in pressing the "-" button before codes were displayed, just wait until all codes cycle by, then the ESP DYNO Test screen will reappear.
No, this doesn't work for any car but the 203, before you ask.
Enjoy, and I'm not buying you new tires!
Senior Member
Joined: Nov 2001
Posts: 436
Likes: 0
From: So Cal
What's with all these secrets? This, the norway mode for the alarm......
Good to have someone on the inside, thanks.
Also, do you have any idea this why this only applies to the W203 C-class and not other newer MB's with the steering wheel controls?
Good to have someone on the inside, thanks.
Also, do you have any idea this why this only applies to the W203 C-class and not other newer MB's with the steering wheel controls?
Last edited by Blue Benz; Dec 1, 2001 at 01:38 AM.
MBWorld Fanatic!
Joined: Nov 2001
Posts: 2,309
Likes: 0
From: Stockholm, Sweden
C200 Kompressor
More questions to the already busy mbtech!
Not only does this disables the ESP. It disables the ABS and BAS as well. Tested this "feature" today and was pretty impressed.
Ok, now on to my questions:
At first I was able to scroll around in two menues. One with the ESP-disableing stuff and one with alot of numbers of wich I only understood: Eng-oil-lev. Kind of cool. I told me I had 6.3 litres of oil in my pan... Ok, when I was in this menu, I pressed and held up-arrow and plus-button for about 10 secs. Then a new screen appeared, with some other numbers of wich i didn't understand a single one. I think the heading in this third hidden menu was someting like SW03.
What was it that was displayed to me?
Just curious....
Thanks in advance!
Ok, now on to my questions:
At first I was able to scroll around in two menues. One with the ESP-disableing stuff and one with alot of numbers of wich I only understood: Eng-oil-lev. Kind of cool. I told me I had 6.3 litres of oil in my pan... Ok, when I was in this menu, I pressed and held up-arrow and plus-button for about 10 secs. Then a new screen appeared, with some other numbers of wich i didn't understand a single one. I think the heading in this third hidden menu was someting like SW03.
What was it that was displayed to me?
Just curious....
Thanks in advance!
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Senior Member
Joined: Mar 2002
Posts: 392
Likes: 0
From: Belgium
Originally posted by Lynn
We were talking about 2003's. This feature has been eliminated on the 2003's.
We were talking about 2003's. This feature has been eliminated on the 2003's.
For different reasons MB-service personnel should not tell the customers.
One of the reasons is warranty.
If someone disabled the ESP (completely) it cannot be known afterwards, even with the Star Diagnosis computer.
So if something happens then, the warranty department never knows if it is something that is not supposed to fail, break, etc...
Admin Alumni
Joined: Nov 2001
Posts: 8,143
Likes: 19
See Garage
Re: 2003
Originally posted by Blaxer
The technique described in the original post does not seem to work on a 2003 C230. Could someone please post updated 03 info? Thanks, Blax...
The technique described in the original post does not seem to work on a 2003 C230. Could someone please post updated 03 info? Thanks, Blax...
Member
Joined: Sep 2002
Posts: 200
Likes: 0
From: CT; Hainan
03' C32, 98' Civic EX
Hahahaha, that's interesting. Hearing the car rev all the way, while dashing to 30mph. But only to see it stops there w/o going any faster. Just picturing this scene makes me want to laugh. So did the car dash to 30 as usual (w/ brutal force), then loses its power (like a fuel cutoff when hit the rev limiter type of scenario)?
Member
Joined: Oct 2002
Posts: 204
Likes: 0
From: Munich, Germany
Schrempps C 32 AMG
First of all thats not very healthy for your tires
On a race i would use this function. The weather must be nice and the swichted off ABS will help you...
But if i just wan´t to "burn" my tires I switch of ESP, tip on the brake [just a little bit] and push the gas pedal. Thats all. No 40 secs delay... [joke)]
On a race i would use this function. The weather must be nice and the swichted off ABS will help you...
But if i just wan´t to "burn" my tires I switch of ESP, tip on the brake [just a little bit] and push the gas pedal. Thats all. No 40 secs delay... [joke
)]
MBWorld Fanatic!
Joined: Nov 2001
Posts: 1,289
Likes: 3
From: OC
C32
The problem with this "Dyno Mode" is that you no longer have the artificial "limited slip" of the computer braking the spinning wheel. It is just like an open differential and the inside wheel spins like crazy on turns and there is no traction off the line(one wheel drive). For me this feature is useless, and would be just as useless on a race track.
Newbie
Joined: Aug 2002
Posts: 11
Likes: 0
From: Atlanta, Ga.
2002 C32 brilliant silver, nav
ESP OFF
Maybe I am not understanding, but with my ESP off it easily lights up both tires and keeps them going for 100 feet and more. They are even straight lines. There is no single tire wheel spin on mine.
MBWorld Fanatic!
Joined: Nov 2001
Posts: 1,289
Likes: 3
From: OC
C32
Buddywhite, you are talking about the ESP
switch on the dash. "Dyno Mode" is done through maintenance pages on the speedo display using the steering wheel switches. Yes, ESP off does keep the electronic limited slip function so both tires will spin.
Newbie
Joined: Aug 2002
Posts: 11
Likes: 0
From: Atlanta, Ga.
2002 C32 brilliant silver, nav
burn out
Thanks, I was stating that when I turn off ESP switch it does disable the stall feature and that both wheels seem to pull evenly. Someone previously had noted that the swith disabled
