Wanted to update those who have been following my mod progress. I've been running the CODE III for a lil over a month now. Belt seems to be fine. I also have the Sprintbooster and Code III cold air intake. Now I've put myself into the hands of LET and Jerry for some ECM stuff. I will give an update (review) after Jerry and I hash out the specifics of what I want and what he can do. For the record, he is very professional, returns phone calls and e mails and doesn't mince words, which I like. I expect to have a review by this weekend.

Thanks Jerry,

Glenn

Sounds good. Keep us posted.

You will feel it

Good choice! I am expecting my "Jerry tune" back tomorrow I will post seperate results as well.

Yes, its important for us to review these mods for effectiveness and cost effectiveness. I will review (subjectively of course since I dont have a dyno)

Glenn

**** Update Thursday: Got my "JerryTune" LET ECM Installed on my C32. Remember, I also have the Code III intake, Code III pulley and KNs, Sprintbooster and some other minor modes. The reason I am so upset is that Jerry did not TELL me I would be needing new rear tires for the car about every 2,000 miles. THE LET Tune is truly unbelievable and so dialed in, you'll feel like you have a different car . Kudos to Jerry at LET for a great tune. Thanks to C32Used for the referral. In fact, Jerry was kind enough to take a ride with me and the back end did NOT want to stay put. This is even before the car has had a chance to learn the new tune. We only went about 4 miles and the car is ridiculous!! Its his first time with the Code III SC Pulley and I think our highest expectations of the tune and the pulley were met. When LET says they produce some of the most feared C32s on the road, I believe them.

On the way home, in an industrial park, I tried to launch with the ESP off and all the way through first and well into second, the car just spun (and it was hot and dry here today). Good for me, bad for tires!!! Can you imagine a 50 degree day. No problems with IAT's (keeping an eye on that too).

Next step now is the 178 Cranker with the CODE III pulley.

*** Word of advice for those guys who are running the Code III pulley. You may be running lean (as I was) due to great increase in air versus fuel. You may need to retune the ECM to get more fuel (run richer) in there. Thanks Jerry for your prompt service, excellent advice and great customer service.

I told you that you will feel it didn't I.

Damnit you guys with all these mods, I'm waiting for LET to finish my HE and 185mm pulley and then I'll be in da "C32 Jerry'd club"

Ah yes....we weren't screwing with you when we said the tune makes all the difference...

The pully makes it pull, but the tune makes it pull at the right points

your HE should be ready this next week... are you still planning on driving over for the install?

OK, it's now called the "LET Tune". People don't know who Jerry is...hell, half the time I don't know who he is.

Very well said!!

Sweeet! Yeah I'm still planning on the install with LET.

haha, no I knew that Jerry tune was LET tune, just giving you all the credit jk.

Jerry,

Do you have any way of letting those of us "downunder" get a piece of this action without us shipping our ECU half way around the world?

I plan on getting my LET tune soon. Its difficult to let the car sit for two weeks while I send the ECU to the US. Jerry, cant you fly over to Germany and custom tune my ECU. We can test it on the Autobahn. LOL

LoL...If life was only that easy my friend..It will be so worth it after its done your car will feel better and faster....do it you won't regret it.

Knowing Jerry, if you paid for and sent the tickets, he would be there in a heartbeat...

Can you get your ECU to Richmond 3121?

I have access to many facilities in Germany....why didn't you just ask?

I'll get you an address to send your ECU you to today. Can you PM me your local number and I'll have my guys in Germany call you?

Jerry, any chance this will happen in Hong Kong too?

Fred - Have your local shop give me a call and we can discuss a partnership / reseller agreement.

Ok, this is a good idea. I'll give him a call tomorrow.

Anyone else want a tune?

Group buy??

I'm really considering it now!