Here is a picture of the the cam install, i finally got thru to putting them on. I will post dyno results as soon as its done. Btw i added a old time slip from b/f without cams or lsd.

Who's brand of cams is that? Please make sure to post before and after dyno's if you have it available.

I just got the car back and it feels great! I want to thank Pat (PTE) for the cams & Justin at Stokes Automotive at 2494 sw 57th ave in Hollywood,Fl. Justin works great and does work for a reasonable price so if you have any mods to do to your car and you're local to him give him a visit. He had the car ready when promised and even did a detail for me.
Btw these are SLR cams.

That's good to hear. I work about 10 minutes away. I'll have to check him out. Looking forward to seeing some 1/4 or dyno updates.

I suspect those cost a bit to purchase...

How much HP increase did you get on those cams?

Congratulations!

Given the aggressive profile of those SLR cams, can we assume that you will need a rather extensive ECU re-map since you are putting them on a non-kompressed motor?
i.e. for:
A) maximum efficiency
B) safety

Great mod and even greater pre-mod time!

You should revise the mapping though.

I have a Renntech tune but I am going to Dyno it tomorrow to check a/f and see how the car is running b/f I got another reflash done. As of now the car is running very strong and does not have any dead spots thru the rpms, just got to see how it responds when spraying. Thanks

About time Roly! Now lets see you beat your previous time.

Vic, you know what my goal is.