Service Reset?
#1
Super Member
Thread Starter
Service Reset?
To preface this thread, I have searched extensively and have applied the steps as described by other forum members, without success.
Can someone PLEASE provide me with the correct step-by-step process to reset my computer, and stop it from displaying the message: "Service A is overdue by 100 miles".
Thanks in advance.
Can someone PLEASE provide me with the correct step-by-step process to reset my computer, and stop it from displaying the message: "Service A is overdue by 100 miles".
Thanks in advance.
#2
MBWorld Fanatic!
"Ignition to position #2 not 3 (3 is crank) bring up the service menu via the steering wheel, push "R" and when instructed to do so release and push again to confirm. Message will then read "service has been reset".
One word of warning the drivers door must be closed otherwise it will not reset and could lock up the cluster."
One word of warning the drivers door must be closed otherwise it will not reset and could lock up the cluster."
#4
Super Member
Thread Starter
"Ignition to position #2 not 3 (3 is crank) bring up the service menu via the steering wheel, push "R" and when instructed to do so release and push again to confirm. Message will then read "service has been reset".
One word of warning the drivers door must be closed otherwise it will not reset and could lock up the cluster."
One word of warning the drivers door must be closed otherwise it will not reset and could lock up the cluster."
#6
MBWorld Fanatic!
Join Date: Apr 2007
Posts: 6,170
Likes: 0
Received 14 Likes
on
11 Posts
300E a couple 1994 w124wagon E320 Wagon/,1971MGB Track/Rally, MG Midget Autocross ,2000 E320 wagon.
The whole
procedure is in your owners manual.If you don't have an owners manual go online to mbusa.com and register in the owners section and they will provide you with free link to model pdf.