***Code Three Performance C32 Intercooler Reservoir Group Buy***
11-24-2008, 06:57 PM
#51
Me too!!! Whats up with that?? The PIG is past the Milky Way and heading like Icarus toward the sun!!!!
11-25-2008, 12:20 AM
#52
MBWorld Fanatic!
Join Date: Aug 2006
Location: Keesler AFB, Gulfport, MS
Posts: 1,717
Likes: 0
Received 0 Likes
on
0 Posts
C32 AMG
I like the guys at C3P, but their turnaround time, after people have paid, is pathetic. If there was more competition out there in this market, that downfall would cost them a ton of business. I was within a day of canceling my order for the HE. It arriving damaged was the icing on the cake.
11-28-2008, 12:44 PM
#54
Junior Member
Join Date: Oct 2008
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Crossfire SRT-6
I like the guys at C3P, but their turnaround time, after people have paid, is pathetic. If there was more competition out there in this market, that downfall would cost them a ton of business. I was within a day of canceling my order for the HE. It arriving damaged was the icing on the cake.
11-28-2008, 01:01 PM
#55
MBWorld Fanatic!
Join Date: Dec 2007
Location: Rochester, MN
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
sounds like airplane
I considered ordering one of these and finding a way to fit it- have decided to go with a trunk mount reservoir instead and run quite a bit more fluid at this point.
only issue i see is plumbing and pumping
the cost for these is sort of high too for a custom application (probably fitting though for those of you lucky enough to have it fit easily with your stock stuff)
only issue I see is with the routing- would seem that "icing" it would work better if it was precooled before it got to the ice. I'd be worried that this way the ice wouldn't last as long (although this may not matter either)
only issue i see is plumbing and pumping
the cost for these is sort of high too for a custom application (probably fitting though for those of you lucky enough to have it fit easily with your stock stuff)
only issue I see is with the routing- would seem that "icing" it would work better if it was precooled before it got to the ice. I'd be worried that this way the ice wouldn't last as long (although this may not matter either)
11-28-2008, 02:00 PM
#56
SPONSOR
Join Date: Jul 2007
Location: Houston/ Austin /Toronto / UAE / Minneapolis / Orlando /Cincinnati
Posts: 5,459
Received 149 Likes
on
109 Posts
Eurocharged Performance ML63 and TT lambo
I considered ordering one of these and finding a way to fit it- have decided to go with a trunk mount reservoir instead and run quite a bit more fluid at this point.
only issue i see is plumbing and pumping
the cost for these is sort of high too for a custom application (probably fitting though for those of you lucky enough to have it fit easily with your stock stuff)
only issue I see is with the routing- would seem that "icing" it would work better if it was precooled before it got to the ice. I'd be worried that this way the ice wouldn't last as long (although this may not matter either)
only issue i see is plumbing and pumping
the cost for these is sort of high too for a custom application (probably fitting though for those of you lucky enough to have it fit easily with your stock stuff)
only issue I see is with the routing- would seem that "icing" it would work better if it was precooled before it got to the ice. I'd be worried that this way the ice wouldn't last as long (although this may not matter either)
11-28-2008, 09:45 PM
#60
I like the guys at C3P, but their turnaround time, after people have paid, is pathetic. If there was more competition out there in this market, that downfall would cost them a ton of business. I was within a day of canceling my order for the HE. It arriving damaged was the icing on the cake.
I'm sorry to hear that your part was damaged. Aaron was brought on to address items like your situation. Hopefully they will resolve it with you.
05-20-2012, 04:47 PM
#62
MBWorld Fanatic!
06-24-2018, 04:23 PM
#63
Newbie
Join Date: Jan 2018
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes c32
Separate and increase the capacity of the C32 intercooler circuit. Code Three Performance proudly presents our new C32 Intercooler Reservoir. Looking for increased daily performance, or a quick drag strip cool down with ice, then this unit is for you.
- Engine bay mounted
- Separates cooling circuit from engine coolant
- All aluminum construction
- 1.2 gallon capacity
- Large O-ringed lid for easy ice filling
- Adjustable bracket
- Fan ports
- Utilizes factory holes for mounting - Includes all hoses, caps, and hardware needed for installation
Retail price is $399. Through the end of the month, we will be offering this new product for $320 shipped! These will be ready on October 31st. As you can see from the pictures below, all parts have been made, and we are in the process of welding all the units together. Also, check out the video of the tank in action.
http://shop.code3performance.com/pro...3&productId=14
http://www.youtube.com/watch?v=E9JbTIc2x3M
- Engine bay mounted
- Separates cooling circuit from engine coolant
- All aluminum construction
- 1.2 gallon capacity
- Large O-ringed lid for easy ice filling
- Adjustable bracket
- Fan ports
- Utilizes factory holes for mounting - Includes all hoses, caps, and hardware needed for installation
Retail price is $399. Through the end of the month, we will be offering this new product for $320 shipped! These will be ready on October 31st. As you can see from the pictures below, all parts have been made, and we are in the process of welding all the units together. Also, check out the video of the tank in action.
http://shop.code3performance.com/pro...3&productId=14
http://www.youtube.com/watch?v=E9JbTIc2x3M
PLEASE EMAIL ME OR TXT 7864871188..
THANX
