Alignment Question
12-11-2008, 02:25 AM
#1
Newbie
Thread Starter
Join Date: Oct 2006
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Alignment Question
Fellow MB experts...
Does the attached alignment look right? The area I am unsure about Front Axle, Track Diff Angle +/-
Target Data: -1 deg 40 +/1 0 deg 30
right wheel lock 20 deg -1 deg 43 before, -1 deg 45 after
left wheel lock 20 deg -1 deg 59 before, -2 deg 12 after
It is bold on the form, for the after correction portion... does this mean it is out of spec?? This is the only value on the form like this.
Thanks in advance.
Does the attached alignment look right? The area I am unsure about Front Axle, Track Diff Angle +/-
Target Data: -1 deg 40 +/1 0 deg 30
right wheel lock 20 deg -1 deg 43 before, -1 deg 45 after
left wheel lock 20 deg -1 deg 59 before, -2 deg 12 after
It is bold on the form, for the after correction portion... does this mean it is out of spec?? This is the only value on the form like this.
Thanks in advance.
12-11-2008, 02:42 AM
#2
MBWorld Fanatic!
Join Date: Jan 2007
Location: Sydney, Australia
Posts: 1,152
Likes: 0
Received 29 Likes
on
23 Posts
190D 2.5 (x2), 190E 2.6, W202 C240,W202 C43 (C55), W210 E55, W212 E250CDI
Are you left hand drive or right hand drive? (not sure where you are located).
The alignment looks fine, but if you're LHD then the front castor would be better the other way around, but it's close enough to be ok.
The alignment looks fine, but if you're LHD then the front castor would be better the other way around, but it's close enough to be ok.
