C32 prts FS: VRP headers, LET tube intake and more
05-25-2009, 03:00 PM
#1
MBWorld Fanatic!
Thread Starter
C32 prts FS: VRP headers, LET tube intake and more
Hey guys. I have VRP headers just laying around in my garage that I am putting up for sale. They were never installed and are still New in opened box.
Also I have the LET Tube Intake with filters that I am going to be selling. It is used, I've had it on the car for around half a year. Condition is excellent. Only thing with this is I will need the OEM intake tubes shipped to me because I am missing those(I am talking about the ones that go before the OEM filterbox and connect into the inlets by the radiator).
Also for sale Code3Performance Intake filter that goes onto the OEM T-Splitter. I've used this for I don't know maybe 30-50 days. The filter is a little stained, but otherwise in perfect condition.
I also have LET HE, LET 185mm pre-recall pulley kit and OEM halogen headlights in perfect condition.
The headlights, both intakes and headers are for sale, so make me an offer.
The 185mm kit and he HE are a feeler, because they are on the car and it's broken again, which means I can't get the OEM parts professionally reinstalled.
Really sad to let go of all these mods, but the car breaks too much for me to want to keep them.
I can start shipping on the 29th of May. I accept paypal only or local pickup in San Antonio. Thanks for viewing!
Also I have the LET Tube Intake with filters that I am going to be selling. It is used, I've had it on the car for around half a year. Condition is excellent. Only thing with this is I will need the OEM intake tubes shipped to me because I am missing those(I am talking about the ones that go before the OEM filterbox and connect into the inlets by the radiator).
Also for sale Code3Performance Intake filter that goes onto the OEM T-Splitter. I've used this for I don't know maybe 30-50 days. The filter is a little stained, but otherwise in perfect condition.
I also have LET HE, LET 185mm pre-recall pulley kit and OEM halogen headlights in perfect condition.
The headlights, both intakes and headers are for sale, so make me an offer.
The 185mm kit and he HE are a feeler, because they are on the car and it's broken again, which means I can't get the OEM parts professionally reinstalled.
Really sad to let go of all these mods, but the car breaks too much for me to want to keep them.
I can start shipping on the 29th of May. I accept paypal only or local pickup in San Antonio. Thanks for viewing!
05-25-2009, 03:30 PM
#4
MBWorld Fanatic!
Thread Starter
My experience with MB service is really bad. The SA's have no clue what's wrong with our cars and for me personally it has been coming to the forums and asking people to help me diagnose the problem and then telling my SA what parts to change, otherwise it would be 10 things they would go through before they find the problem, if they find it at all. I hope they don't have idiots like that working in Germany. Very disatisfied with the build quality of the C32 and even more with the dumbasses that are supposed to know how to fix them.
Lenin, I hope you don't have as many problems as I did with my car. Good luck! Are you Russian?
05-25-2009, 03:52 PM
#6
MBWorld Fanatic!
Join Date: Mar 2004
Location: North NJ
Posts: 2,073
Likes: 0
Received 27 Likes
on
25 Posts
2002 C32 AMG, 2013 GLK 350/4, 2015 E63S AMG Wagon
And yes, I was born in the former USSR.
Trending Topics
05-30-2009, 10:44 AM
#11
MBWorld Fanatic!
Thread Starter
Okay guys I just got back from a vacation, please resend me pm's if I havn't replied to them.
-LET Intake with filters - $400 shipped ( you must ship me the OEM intake tubes that come before the filter box). I had to cut the rubber rings to make it fit the filters and the tubes, there are no leaks and it doesn't affect the flow of air in any way. Just something I wanted to mention. I would post the pix but the intake is on the car 100 miles away.
-185mm PRE-RECALL Pulley kit - $550 shipped. Give me about a week or two to ship this, it's located 100 miles away and I have to take it off the car first, but if you make a little downpayment then I will plan a weekend drive to take it off.
-C3P Intake (the one that goes onto the T-Splitter) - $85 shipped
-VRP Headers NEW - $650 shipped
-Johnson Pump - $110 shipped
-OEM Halogen Headlights - $150
-Heat Exchanger - this is going to be too much of a hastle to take off and put back on for me, so I might just leave that on the car. But if you want a perfectly fine OEM HE, then I can do $100 shipped for it.
I think that's it.
If I quoted you a cheaper price in PM's then that offer stands.
All prices are OBO.
Take it easy!
-LET Intake with filters - $400 shipped ( you must ship me the OEM intake tubes that come before the filter box). I had to cut the rubber rings to make it fit the filters and the tubes, there are no leaks and it doesn't affect the flow of air in any way. Just something I wanted to mention. I would post the pix but the intake is on the car 100 miles away.
-185mm PRE-RECALL Pulley kit - $550 shipped. Give me about a week or two to ship this, it's located 100 miles away and I have to take it off the car first, but if you make a little downpayment then I will plan a weekend drive to take it off.
-C3P Intake (the one that goes onto the T-Splitter) - $85 shipped
-VRP Headers NEW - $650 shipped
-Johnson Pump - $110 shipped
-OEM Halogen Headlights - $150
-Heat Exchanger - this is going to be too much of a hastle to take off and put back on for me, so I might just leave that on the car. But if you want a perfectly fine OEM HE, then I can do $100 shipped for it.
I think that's it.
If I quoted you a cheaper price in PM's then that offer stands.
All prices are OBO.
Take it easy!
06-03-2009, 10:30 PM
#17
MBWorld Fanatic!
Thread Starter
06-14-2009, 02:33 PM
#22
MBWorld Fanatic!
Thread Starter
Sorry guys I think I am going to keep the car. Visited my dad yesterday, drove it and just couldn't let it go. He gave it to me as long as I would pay for repairs. So now I need a job lol.
Headers and pump are still for sale though.
I WTB the OEM intake tubes that go before the filters, pm me.
Headers and pump are still for sale though.
I WTB the OEM intake tubes that go before the filters, pm me.
