Transmission mount C32
#3
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
2003 C32 AMG
Under the car...Very funny. I appreciate the humor, I really do. BUT...I was under the car when I dropped the transmission pan and changed out the filter. I looked around at the time, but could not see it. It is in the front or rear of the tranny? Also, do I put a jack under the transmission at the pan? It seems like that might crush the pan...
#4
MBWorld Fanatic!
Join Date: Mar 2007
Location: Houston, TX
Posts: 1,948
Likes: 0
Received 3 Likes
on
2 Posts
C32/C55 AMG
This DIY should work for the C32 since Mercedes usually does not change there designs a lot and the transmission is basically the same. Someone correct me if I'm wrong.
You don't have to remove the (crossmember?) long black piece.
Just the two 13mm bolts from the picture, and the other two, mount-to-tranny.
References:
https://mbworld.org/forums/clk-class...cabriolet.html
https://mbworld.org/forums/c-class-w...acement-2.html
You don't have to remove the (crossmember?) long black piece.
Just the two 13mm bolts from the picture, and the other two, mount-to-tranny.
References:
https://mbworld.org/forums/clk-class...cabriolet.html
https://mbworld.org/forums/c-class-w...acement-2.html
#5
Member
Under the car...Very funny. I appreciate the humor, I really do. BUT...I was under the car when I dropped the transmission pan and changed out the filter. I looked around at the time, but could not see it. It is in the front or rear of the tranny? Also, do I put a jack under the transmission at the pan? It seems like that might crush the pan...
1.Rear.
2.Yes , u have to put a jack under the transmission (use a piece of wood in order not to crush the pan)
#6
Member
Under the car...Very funny. I appreciate the humor, I really do. BUT...I was under the car when I dropped the transmission pan and changed out the filter. I looked around at the time, but could not see it. It is in the front or rear of the tranny? Also, do I put a jack under the transmission at the pan? It seems like that might crush the pan...
1.Rear.
2.Yes , u have to put a jack under the transmission (use a piece of wood in order not to crush the pan)
and it is better to remove the crossmember, it make life easier.