Bushing Part Number(s) for H&R front sway bar?
#1
MBWorld Fanatic!
Thread Starter
Join Date: Mar 2009
Location: GA
Posts: 2,135
Likes: 0
Received 6 Likes
on
6 Posts
2016 Chevrolet SS, 2006 Cadillac STS-V
Bushing Part Number(s) for H&R front sway bar?
Does anyone happen to have the part number(s) for the front 26mm H&R sway bar? My car has developed a nice clunk in the front end and I know the bushings were worn last time I greased them, so I'm going to start there.
#3
MBWorld Fanatic!
Thread Starter
Join Date: Mar 2009
Location: GA
Posts: 2,135
Likes: 0
Received 6 Likes
on
6 Posts
2016 Chevrolet SS, 2006 Cadillac STS-V
Awesome, thanks. Where did you buy your's from? Tire rack said it could take weeks to get them. I haven't tried anyone else yet. I've been ignoring the noise for a while, but now it's starting to get worse.
#5
Junior Member
Join Date: May 2012
Location: Surrey England
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
c32 amg
#6
Junior Member
Join Date: May 2012
Location: Surrey England
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
c32 amg
Ok,so I'm having a few problems trying to get my hands on these bushings,I bought some universal 1's that weren't even close and the sites in the UK are telling me I need to buy the complete sway bar kit to get the bushings,which seems a little expensive....
I have tried a few websites and even tried looking on USA ebay (it worked for my S/C bearings) but am getting nowhere...
If anyone has a link or phone number, could they please PM me it...
Much appreciated Elvin
I have tried a few websites and even tried looking on USA ebay (it worked for my S/C bearings) but am getting nowhere...
If anyone has a link or phone number, could they please PM me it...
Much appreciated Elvin
#7
Junior Member
Funny , I thought I was the only one with this Problem , It seems I am changing them almost yearly driving on NYC streets.
Anyone know of any Poly Bushings for to replace these from H&K ?
I am getting tired of changing them , Now the ones in the rear went which has lasted the longest .
Maybe time to look into a different sway bar setup
Anyone know of any Poly Bushings for to replace these from H&K ?
I am getting tired of changing them , Now the ones in the rear went which has lasted the longest .
Maybe time to look into a different sway bar setup
Trending Topics
#8
MBWorld Fanatic!
I was about to jump on the H&R 19mm for the rearend. They swear you don't have to grease them, but I was skeptical. Are these things so prone to bushing wear that its worth looking at another brand?