Hello , I have problems with my c32 amg , is giving failures in the cylinder 1, and the spark, wires , injector is checked , and the problem continues. someone else can help me with this.
MBWorld Fanatic!
Could be coil pack or bad camshaft. Earlier C32's had cam lobes pressed on, so they have a tendency to move.
U need to hook up a scope and see if its getting full spark.
U need to hook up a scope and see if its getting full spark.
I check the all coil pack and is good. also check compression on all cylinders and are equal in all. Compression is very good. and check injectors and spark is in good condition. My problem is Only the cylinder 1 is failing. When can do?
Member
change the plugs on that cylinder first anyways, if not look into the camshaft problem that affects pre 2003 model c32s
and I put new coil pack and spark. injectors also change position. and the fault persists only in the cylinder 1. not to do.
Quote:
and I put new coil pack and spark. injectors also change position. and the fault persists only in the cylinder 1. not to do.Originally Posted by Dollos
change the plugs on that cylinder first anyways, if not look into the camshaft problem that affects pre 2003 model c32s
Quote:
U need to hook up a scope and see if its getting full spark.
Please read....up . 🔝Originally Posted by Gramma_Benz
Could be coil pack or bad camshaft. Earlier C32's had cam lobes pressed on, so they have a tendency to move.U need to hook up a scope and see if its getting full spark.
another question. it is possible that the compression cylinder has well if the camshaft is bad?
I understand that if the camshaft is damaged should be no compression or at least less compression.
They think?
I understand that if the camshaft is damaged should be no compression or at least less compression.
They think?
MB World Stories
The Best of Mercedes & AMG
ExploreIf you clear the misfires CEL, how quickly does it come back? At what RPM?
Super Member
C3Duece
Super Member
close
- Join DateMay 2013
- Posts:522
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2002 C32AMG
-
Likes:148
-
Liked:15 Times in 15 Posts
Quote:
I understand that if the camshaft is damaged should be no compression or at least less compression.
They think?
compression will be lower if the cam lobe has shiftedOriginally Posted by baron c32
another question. it is possible that the compression cylinder has well if the camshaft is bad? I understand that if the camshaft is damaged should be no compression or at least less compression.
They think?
