Square stance
03-21-2016, 01:12 PM
#2
Super Member
03-21-2016, 01:48 PM
#3
Super Member
Join Date: Feb 2009
Location: Seattle
Posts: 676
Likes: 0
Received 1 Like
on
1 Post
W209, E46 M3 (dead), S54 swapped E46 Touring
yes it will work, you just need to add a spacer up front for the calipers and inner wheel well to clear. I converted my wheel bolts to wheel studs and lug nuts to make the process easier as well. I used a 15mm spacer but you could test fit to see what works best for you.
03-21-2016, 04:31 PM
#4
Super Member
Thread Starter
yes it will work, you just need to add a spacer up front for the calipers and inner wheel well to clear. I converted my wheel bolts to wheel studs and lug nuts to make the process easier as well. I used a 15mm spacer but you could test fit to see what works best for you.
03-21-2016, 05:41 PM
#5
Super Member
yes it will work, you just need to add a spacer up front for the calipers and inner wheel well to clear. I converted my wheel bolts to wheel studs and lug nuts to make the process easier as well. I used a 15mm spacer but you could test fit to see what works best for you.
03-22-2016, 03:05 AM
#6
Super Member
your set up is gorgeous man. Maybe I will look into it in the distant future when I maybe become a show stopper. As for now I am happy with the way my car is with the stock however I would prefer the all round stepped 55 wheels. The rears do look better than the front.
Trending Topics
03-24-2016, 05:13 PM
#8
Senior Member
Join Date: Nov 2014
Location: Downingtown, PA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
none... for now
Before anyone says yes, I did it, you have to compare the C55 rear wheel offset to whatever wheel you have. Obviously spacers usually greatly open the door of possibilities though.
03-25-2016, 01:25 PM
#9
Super Member
Thread Starter
