c55 advice need




i know a guy, who took everything from donor cracked 07 "SLK55", and put it on his "W203",,
Now his smile flows everywhere..


-;-ZAYED-;-
Last edited by cm60k; Aug 4, 2021 at 05:10 PM.


Sold in North America 05-06, but only sedans.
F1 Special Edition (400 hp) was sold only in Germany.
Total amount produced (sedan, estate, SE) was approx 4.600.
SLK 55 Black Series had the same engine as the F1 Special Edition (M113 EVO with some extra stuff as headers etc).
Last edited by amgen; Aug 4, 2021 at 05:14 PM.




Sold in North America 05-06, but only sedans.
F1 Special Edition (400 hp) was sold only in Germany.
Total amount produced (sedan, estate, SE) was approx 4.600.
SLK 55 Black Series had the same engine as the F1 Special Edition (M113 EVO with some extra stuff as headers etc).




A) W202 from (March/1993) >> till (July/2000).
B) W203 from (July/2000) >> till (Oct/2007), and coupe with station wagon till (Nov/2011).
-;-ZAYED-;-
Trending Topics


Number of Sedans built: 4.021 between May 2004 and February 2007
Number of Wagons built: 595 between May 2004 and May 2007
Number of imported Sedans to North America: 1.750 in 2005 and 2006 (no wagons)
The Best of Mercedes & AMG




is 2007 C55 comes with U.S version..!?!,,
AFAIK; MB replaced C55 >>> W204 C63, isn't..!?!?!
-;-ZAYED-;-
which market it went too , build sheet like special orders like a 7 speed gearbox .
ZAYED,
I am planning to built a M113 engine in my w460 G class.
class.
I will also take the interior (seats), dashboard and instrument cluster.
I'm considering 3 options as donor vehicle.ML55 amg pré-facelift (before 2002) W163
- Engine: M113 5.5
- ECU: Bosch ME2.0
- Transmissie: 5G 722.6
- Engine: M113 5.5
- ECU: Bosch ME2.8
- Transmissie: 5G 722.6
- Engine: M113 5.0 (eventually upgraded with a m113 5.5 amg engine afterwards)
- ECU: Bosch ME2.8
- Transmissie: 7G 722.9 (internal TCM)
Its hard to find a cheap facelift ml55 amg for parts.
Pre-facelift with ME2.0 are cheap.
Also i found a cheap ML500 w164.
I like the 7G transmission and the modern instrument cluster look of the w164.
What would you suggest as a donor vehicle considering my whishes?
I know that tuning/programming the ME2.8 is easier then ME2.0.
But the 7G transmission from the w164 is harder with software tune/programming then the 5G. (Speed sensor removal for example)
Hopefully you can help me.
Many thank from the Netherlands!!
I am planning to built a M113 engine in my w460 G class.
class.
I will also take the interior (seats), dashboard and instrument cluster.
I'm considering 3 options as donor vehicle.ML55 amg pré-facelift (before 2002) W163
- Engine: M113 5.5
- ECU: Bosch ME2.0
- Transmissie: 5G 722.6
- Engine: M113 5.5
- ECU: Bosch ME2.8
- Transmissie: 5G 722.6
- Engine: M113 5.0 (eventually upgraded with a m113 5.5 amg engine afterwards)
- ECU: Bosch ME2.8
- Transmissie: 7G 722.9 (internal TCM)
Its hard to find a cheap facelift ml55 amg for parts.
Pre-facelift with ME2.0 are cheap.
Also i found a cheap ML500 w164.
I like the 7G transmission and the modern instrument cluster look of the w164.
What would you suggest as a donor vehicle considering my whishes?
I know that tuning/programming the ME2.8 is easier then ME2.0.
But the 7G transmission from the w164 is harder with software tune/programming then the 5G. (Speed sensor removal for example)
Hopefully you can help me.
Many thank from the Netherlands!!
it has the engine you want, tunable ECU, (The 2.0 is very difficult to tune or to find a tuner most people running that would switch to the 2.8.) A solid trans. The only thing is, I would highly recommend getting a tcu tune to add some pep to it. Zero cat is very good! I hope this helps man and good luck
it has the engine you want, tunable ECU, (The 2.0 is very difficult to tune or to find a tuner most people running that would switch to the 2.8.) A solid trans. The only thing is, I would highly recommend getting a tcu tune to add some pep to it. Zero cat is very good! I hope this helps man and good luck
Then i got both advantages of engine 55amg 2.8 and 7G transmission.
Maybe its too hard to get the 7G to work properly without limp mode if different sensors are not there?
Is it even possible to swap out a ME2.8 500 engine to an ME2.0 55 engine? I can imagine that the me2.8 needs another 55 file. But do hardware things also match on those engines?




