Pvc/oil Catch Can
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 2,330
Likes: 0
1967 Morris Cooper "S", 1983 911SC, 1997 Toyota Tacoma, 1999 HD FXSTB, 1998 C43
Pvc/oil Catch Can
Is this something OUR cars (C43) could benefit from - I've noticed when I change my oil that the inner walls of the rocker/valve covers are kinda varnished up. LINK Has anyone here used one of these?
MBWorld Fanatic!
Joined: Feb 2004
Posts: 5,475
Likes: 5
From: City with Tall buildings!
C43/55,2k11 Volvo S60 T6AWD,2k Audi B5 S4,95 Eagle Talon Tsi AWD 500+awhp
Is this something OUR cars (C43) could benefit from - I've noticed when I change my oil that the inner walls of the rocker/valve covers are kinda varnished up. LINK Has anyone here used one of these?
MBWorld Fanatic!
Joined: Feb 2004
Posts: 1,559
Likes: 0
From: Portsmouth, NH
none
I've had one on my car since the SC was installed a little over a year ago. I will find a picture and link for the one I bought. It is smaller than most and I found a bracket along the fuel line on the fire wall thats a perfect fit.
I'll snap some pics of my intake as well and you will see who much crap builds up inside, which you also pull into the combustion chamber. I empty it at every oil change and it's about 3/4 full of odd looking goo.
I'll snap some pics of my intake as well and you will see who much crap builds up inside, which you also pull into the combustion chamber. I empty it at every oil change and it's about 3/4 full of odd looking goo.
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 2,330
Likes: 0
1967 Morris Cooper "S", 1983 911SC, 1997 Toyota Tacoma, 1999 HD FXSTB, 1998 C43
That would be great, whenever you take 'em - see if you can show the lines you tapped into. I think I'm going to be adding one...
Last edited by StapleGun; May 28, 2007 at 08:32 AM.
