NEVER TELL ME YOU CAN'T....
#51
MBWorld Fanatic!
I think you hate any car with a 5.5l motor blown or not.
The 4.3L motor is a nice motor and the 5.5L even better especially as an upgrade for the W202 C43.
#54
MBWorld Fanatic!
Join Date: Jun 2006
Location: The city that never sleeps
Posts: 2,017
Likes: 0
Received 0 Likes
on
0 Posts
ML320, Looking for my S4
#57
MBWorld Fanatic!
Join Date: Dec 2007
Location: Rochester, MN
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
sounds like airplane
I think he thinks u were naïve to what is going on and somehow asking if the swap was as easy as installing the sc? I don't get it either.
#58
MBWorld Fanatic!
Join Date: Jun 2006
Location: The city that never sleeps
Posts: 2,017
Likes: 0
Received 0 Likes
on
0 Posts
ML320, Looking for my S4
No, I ment that you blew your 4.3L motor. Hence the tick tick boom thread, and I noticed one of your posts hinting towards you doing this as your next setup. No disrespect. Btw, I was that kid back at newport with the E320 about 2/3 years ago. I also delivered that c/f hood to you about 2 years ago aswell.
#59
MBWorld Fanatic!
By the way nitro,I have not read the thread but did your motor really go bad?
If so your next move is very predictable. But sorry if that was the case if your motor was truly blown.
#60
MBWorld Fanatic!
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
Hey Tommy! I remember well, just wasn't sure if I was missing something by the way you wrote that.
Carl, it went kaboom alright..and I'm 99% sure it was my own fault the handfull of metal and the completly drained oil pan confirms I'm going to start a thread with pics when I start cleaning things up.
To keep this on the OP topic and not mine I have thought about the E55K swap. $ and capability will probably keep me to the N/A 55 swap. However, if a reciepe that can be easily followed pops up I wouldn't mind something like this.
The timing of his post is so ironic....*******s..
Carl, it went kaboom alright..and I'm 99% sure it was my own fault the handfull of metal and the completly drained oil pan confirms I'm going to start a thread with pics when I start cleaning things up.
To keep this on the OP topic and not mine I have thought about the E55K swap. $ and capability will probably keep me to the N/A 55 swap. However, if a reciepe that can be easily followed pops up I wouldn't mind something like this.
The timing of his post is so ironic....*******s..
#62
MBWorld Fanatic!
Hey Tommy! I remember well, just wasn't sure if I was missing something by the way you wrote that.
Carl, it went kaboom alright..and I'm 99% sure it was my own fault the handfull of metal and the completly drained oil pan confirms I'm going to start a thread with pics when I start cleaning things up.
To keep this on the OP topic and not mine I have thought about the E55K swap. $ and capability will probably keep me to the N/A 55 swap. However, if a reciepe that can be easily followed pops up I wouldn't mind something like this.
The timing of his post is so ironic....*******s..
Carl, it went kaboom alright..and I'm 99% sure it was my own fault the handfull of metal and the completly drained oil pan confirms I'm going to start a thread with pics when I start cleaning things up.
To keep this on the OP topic and not mine I have thought about the E55K swap. $ and capability will probably keep me to the N/A 55 swap. However, if a reciepe that can be easily followed pops up I wouldn't mind something like this.
The timing of his post is so ironic....*******s..
I sometimes contemplate finding a nice Vortech kit for mines. But we'll see.
Right now Money-one is the man and I'm just chasing his progress.
However,I can assure you that you would love the N/A 5.5l option as well.
Last edited by ProjectC55; 07-10-2009 at 10:08 AM.
#63
Super Member
Join Date: Apr 2002
Location: Sacramento
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
AMG C43, 1999
Nitro
You will like the amg 5.4L N/A motor. Especially if you use a better exhaust that gets rid of the precats. If you open up the intake side of things by boring out the MAF housing to 81mm and doing so with the elbow and if you cut the throttle body at a 7 degree taper to throttle plate you will get lots of extra flow.
With the intake changes and exhaust changes my ca r would run high 12 secs. at around 111mph if I recall right.
Anyhow while I really like the N/A engine the Kompressor engine would be awesome. That extra power would really put some steel in your stride.
Jeff
You will like the amg 5.4L N/A motor. Especially if you use a better exhaust that gets rid of the precats. If you open up the intake side of things by boring out the MAF housing to 81mm and doing so with the elbow and if you cut the throttle body at a 7 degree taper to throttle plate you will get lots of extra flow.
With the intake changes and exhaust changes my ca r would run high 12 secs. at around 111mph if I recall right.
Anyhow while I really like the N/A engine the Kompressor engine would be awesome. That extra power would really put some steel in your stride.
Jeff
#64
Member
Thread Starter
Join Date: Sep 2007
Location: Maryland
Posts: 217
Likes: 0
Received 3 Likes
on
2 Posts
C43/2jz, Ml63, C32
The N/A 5.5 swap hands down the easiset swap. The only thing you had to do was re-route the cooling line on the back of the head for the factory trans. cooler on the C43. Everything else was plug and play. Don't forget reseting adaptations. The 5.5 Komp. has a lot of little ignorant things that had to be done and modified. Too much to list. If you are Really intrested in this swap being done to your car I have pics.
#65
Member
Thread Starter
Join Date: Sep 2007
Location: Maryland
Posts: 217
Likes: 0
Received 3 Likes
on
2 Posts
C43/2jz, Ml63, C32
I will absolutely be doing more of that when she is running right. I just did a short pull last night after i got the t/b worked out (wiring incorrect) This thing pulls quite nicely. No MAF clamp, No tune, No Coolant(waiting on radi.) and the fuel pump housing is leaking. Waiting on parts.....I hate waiting on parts
#67
MBWorld Fanatic!
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
Would you mind sending me a PM about what this swap should cost without labor? I did plan on picking up the N/*** to replace my 4.holeintheblock, however I came across this.
http://cgi.ebay.com/ebaymotors/03-08...Q5fAccessories
I thought these sold for around 10K so this seems like a really good deal, too good maybe?
http://cgi.ebay.com/ebaymotors/03-08...Q5fAccessories
I thought these sold for around 10K so this seems like a really good deal, too good maybe?
#69
Member
Join Date: Mar 2008
Location: Va
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Supercharged CLK430 street/show car
Sweet swap
Pay no mind to the folks that sipped a little to much haterade! Keep us posted especially on the tuning. I wanted to do this to my CLK 430 but was told it would be to expensive or wouldnt work with stock ECU or TCU etc.
#72
Junior Member
Join Date: Apr 2009
Location: San Diego
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
1998 C43
I have to say that I am very angry at money for performing this swap. Now everyday at work when I see a 55 Kompressor engine, I sit there thinking about how much better it would look inside the engine bay of my C43. Thanks money for causing me to daydream and lose hours. :P
#73
Member
Thread Starter
Join Date: Sep 2007
Location: Maryland
Posts: 217
Likes: 0
Received 3 Likes
on
2 Posts
C43/2jz, Ml63, C32
I have to say that I am very angry at money for performing this swap. Now everyday at work when I see a 55 Kompressor engine, I sit there thinking about how much better it would look inside the engine bay of my C43. Thanks money for causing me to daydream and lose hours. :P
Update: Not sure what day it was but I finished making the intake pipe I let the car warm up and when the car got up to operating temp. #1 cylinder injector failed in the open position and flooded/fouled that cylinder. Replaced injector and plugs for that cylinder and she straightened out. 2 Fridays back the radiator and fuel pump came and were installed. This past wednesday I got the car to where i felt comfortable driving her home (going to go dyno thursday). 20 mins into the drive after several hard 70-120ish pulls The last one gave out around 90mph. First to go was the coolant and second was the oil. Didnt take pics but everything was covered in oil including the whole driver side Yesterday was spent cleaning the oil off and resecuring everything correctly. Today I wired in some resistors for the EGR and Air Switch Over solenoids. They were consistant codes but now after a 6 mile trip Hard of course no, I repeat NO Check Engine. This is with 100% zero tunning. The MAF will i assume come on. Looking the car over I found the oil cooler line is trying to work its way off again The cooler is too small and is acting as a restriction. And It also feels as though the bypass valve is not adjusted correctly there is a lag before kicking in. Buying a boost guage, UEGO guage and larger oil cooler.
Few pics and vid. Please excuse my commentary.
http://www.youtube.com/watch?v=Q-GwnKcMeYM
Last edited by money-one; 07-25-2009 at 07:59 PM. Reason: miss print
#75
MBWorld Fanatic!
I do what I can to help the community You would never guess what I look at now and only think "Maybe if I waited a little longer that would probably fit" V12tt
Update: Not sure what day it was but I finished making the intake pipe I let the car warm up and when the car got up to operating temp. #1 cylinder injector failed in the open position and flooded/fouled that cylinder. Replaced injector and plugs for that cylinder and she straightened out. 2 Fridays back the radiator and fuel pump came and were installed. This past wednesday I got the car to where i felt comfortable driving her home (going to go dyno thursday). 20 mins into the drive after several hard 70-120ish pulls The last one gave out around 90mph. First to go was the coolant and second was the oil. Didnt take pics but everything was covered in oil including the whole driver side Yesterday was spent cleaning the oil off and resecuring everything correctly. Today I wired in some resistors for the EGR and Air Switch Over solenoids. They were consistant codes but now after a 6 mile trip Hard of course no, I repeat NO Check Engine. This is with 100% zero tunning. The MAF will i assume come on. Looking the car over I found the oil cooler line is trying to work its way off again The cooler is too small and is acting as a restriction. And It also feels as though the bypass valve is not adjusted correctly there is a lag before kicking in. Buying a boost guage, UEGO guage and larger oil cooler.
Few pics and vid. Please excuse my commentary.
http://www.youtube.com/watch?v=Q-GwnKcMeYM
Update: Not sure what day it was but I finished making the intake pipe I let the car warm up and when the car got up to operating temp. #1 cylinder injector failed in the open position and flooded/fouled that cylinder. Replaced injector and plugs for that cylinder and she straightened out. 2 Fridays back the radiator and fuel pump came and were installed. This past wednesday I got the car to where i felt comfortable driving her home (going to go dyno thursday). 20 mins into the drive after several hard 70-120ish pulls The last one gave out around 90mph. First to go was the coolant and second was the oil. Didnt take pics but everything was covered in oil including the whole driver side Yesterday was spent cleaning the oil off and resecuring everything correctly. Today I wired in some resistors for the EGR and Air Switch Over solenoids. They were consistant codes but now after a 6 mile trip Hard of course no, I repeat NO Check Engine. This is with 100% zero tunning. The MAF will i assume come on. Looking the car over I found the oil cooler line is trying to work its way off again The cooler is too small and is acting as a restriction. And It also feels as though the bypass valve is not adjusted correctly there is a lag before kicking in. Buying a boost guage, UEGO guage and larger oil cooler.
Few pics and vid. Please excuse my commentary.
http://www.youtube.com/watch?v=Q-GwnKcMeYM
I need to plan a trip down there b4 fall. I'd love to see the beast.
Keep up the good work bro.