Quote:
Moar picz of fresh paint please
Sorry about the delay. Been busy with work, starting a business, and maintaining/restoring 2 Mercedes. Originally Posted by PJmak
*** yea glad to see shes been saved
Moar picz of fresh paint please

Will get another shoot done once I replace the glass and re-tint the car (and hopefully get the front bumper valence).
Without further ado: https://www.flickr.com/photos/vasupe...57655502839939
Very nice car and pics. I like the one with the bird view and the wiper in the middle of the windshield.
Quote:
did you sort her out after your winter crash a few years ago?
Yeah. I made a brief post after the rebuild the other year. Now I'm back to doing regular maintenance and slowly restoring the rest of the car. The goal is to get it back to OEM+ status (need to find 18" monos, some trim pieces, etc).Originally Posted by kowalski
very nice looking c43did you sort her out after your winter crash a few years ago?
Quote:
How's 18" memos OEM? I had to buy 18"s as mine were 17".Originally Posted by importfan21
Yeah. I made a brief post after the rebuild the other year. Now I'm back to doing regular maintenance and slowly restoring the rest of the car. The goal is to get it back to OEM+ status (need to find 18" monos, some trim pieces, etc).
Quote:
I said "OEM+"Originally Posted by speed43
How's 18" memos OEM? I had to buy 18"s as mine were 17".
18s would fall under the +. They looked better than 17s on this car anyway.
DRBC43AMG
MBWorld Fanatic!
close
- Join DateMar 2010
- LocationLand of mountains, cheese, chocolate and watches
- Posts:5,891
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive12' W204 C63 AMG coupe "T-Rex", 12' W451 Smart Fortwo Pulse (99' W202 C43 AMG + Ultima Can-Am sold)
-
Likes:728
-
Liked:323 Times in 268 Posts
Nice pixs. Pity you lost the teeth brace in the front... That's an expensive part to buy if you can find it 

MB World Stories
The Best of Mercedes & AMG
ExploreHey what are the width and offset of those rims?
I have a spare tooth brace lying around has a few small cracks, can you still get these new?
I have a spare tooth brace lying around has a few small cracks, can you still get these new?
Quote:
I have a spare tooth brace lying around has a few small cracks, can you still get these new?
17x8 ET35 frontOriginally Posted by Pagz
Hey what are the width and offset of those rims?I have a spare tooth brace lying around has a few small cracks, can you still get these new?
18x8.5 ET25 rear
Not sure if the lower valence is still available. I'm trying to find out.
MBWorld Fanatic!
so i do not have much knowledge about wheels, but would the different wheel size affect abs/esp? are your tires low pro in the rear to even out the ratio with front tires?
on first blush (as a non-expert), i feel like the smaller front wheel might improve ride/handling with the taller sidewall. whats the general consensus on this idea?
on first blush (as a non-expert), i feel like the smaller front wheel might improve ride/handling with the taller sidewall. whats the general consensus on this idea?
Quote:
on first blush (as a non-expert), i feel like the smaller front wheel might improve ride/handling with the taller sidewall. whats the general consensus on this idea?
As long as you keep the rolling diameter the same, it's ok. Yes, went 35 sidewall on rear (45 on front).Originally Posted by mickey13
so i do not have much knowledge about wheels, but would the different wheel size affect abs/esp? are your tires low pro in the rear to even out the ratio with front tires?on first blush (as a non-expert), i feel like the smaller front wheel might improve ride/handling with the taller sidewall. whats the general consensus on this idea?
PJmak
MBWorld Fanatic!
close
- Join DateSep 2007
- Posts:4,566
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive05 c55 silver, 98 Imperial Red C43
-
Likes:139
-
Liked:421 Times in 315 Posts
Looking good 
Im pretty sure you can get the bumper piece new still. Mine fellout and dragged under the car(its zipped to the bumper).
Ill need a new one also

Im pretty sure you can get the bumper piece new still. Mine fellout and dragged under the car(its zipped to the bumper).
Ill need a new one also
Banned
Quote:

Im pretty sure you can get the bumper piece new still. Mine fellout and dragged under the car(its zipped to the bumper).
Ill need a new one also
ha ha ha! Originally Posted by PJmak
Looking good 
Im pretty sure you can get the bumper piece new still. Mine fellout and dragged under the car(its zipped to the bumper).
Ill need a new one also

is this a joke?
didn't you already replace your bumper after you bought your car many years ago?
now the new one fell off, is this correct?
how the hell can a bumper fall off?
didn't you bolt it correctly?
Super Member
I'm assuming he's referring to the small center section that attaches to the bumper. Not the entire thing. Lol.
Banned
Quote:
i guess i then red it wrong, i thought PJ dropped his rear bumper Originally Posted by eFifty5AMG
I'm assuming he's referring to the small center section that attaches to the bumper. Not the entire thing. Lol.


PJmak
MBWorld Fanatic!
close
- Join DateSep 2007
- Posts:4,566
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive05 c55 silver, 98 Imperial Red C43
-
Likes:139
-
Liked:421 Times in 315 Posts
What you thought I had my bumper zipptied to the car



Banned
Quote:

You know Balkan style! Originally Posted by PJmak
What you thought I had my bumper zipptied to the car

a100steaksauce
Super Member
close
- Join DateJun 2010
- Posts:639
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I driveW218
-
Likes:608
-
Liked:34 Times in 27 Posts
well done







