When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I decided to design a set of fog delete covers for my friend since he can't find a set! Turned out pretty nice. I still want to do a few tweeks here and there, but it's pretty much done.
I had to remove my fog lights to respect legal rules and regulations because with the lowering on the KW Variant 2 suspension they were too low...
Added grilles to cover the holes and made them air scoops for brake cooling
And yeah there is some damage on the bumber corner
Last edited by DRBC43AMG; 02-26-2022 at 06:20 AM.
Reason: Added pic
I had to remove my fog lights to respect legal rules and regulations because with the lowering on the KW Variant 2 suspension they were too low...
Added grilles to cover the holes and made them air scoops for brake cooling
And yeah there is some damage on the bumber corner
Nice! I was also thinking about making it an air duct for version 2.0 of the fog delete covers. I'll most likely do it for C43s too. Any pictures of how you did the air ducts under the mesh?
Last edited by TheOldschoolers; 02-26-2022 at 09:47 AM.
Nice! I was also thinking about making it an air duct for version 2.0 of the fog delete covers. I'll most likely do it for C43s too. Any pictures of how you did the air ducts under the mesh?
Dug out some photos showing the scoop attached to the back of the bumber. Also the flex pipe and fixtures used to connect scoop to the wheel well coverage (not yet installed),
View from front of bumber Bonded with Wurth "black death" Flex pipe and adaptors to fix to inner wheel well cover
Dug out some photos showing the scoop attached to the back of the bumber. Also the flex pipe and fixtures used to connect scoop to the wheel well coverage (not yet installed),
View from front of bumber Bonded with Wurth "black death" Flex pipe and adaptors to fix to inner wheel well cover
Very nice! It's exactly what I had planned for the next evolution of the C36 fog covers. I would design the scoop into the cover to make the fit 100%. Thanks for your pictures!
02-25-2022, 01:06 PM
