How do these look?
After looking at a pretty wide range of door pins, thought these looked the best:
The part number is A 099 766 01 00 2A17.
Here is the origin:
The steps are:
1. Order four of these A 099 766 01 00 2A17:
...and four of these A 099 766 00 00:
2. Remove current door pin:
Should look like:
3. Follow this proceedure:
Here is the trick that the MB master mechanic told me (and I can confirm that you need to do it this way). Connect both the door pin and clip together and then lock the door, next push the door pin/clip combo down as far as it goes... it will lock in place. If you attempt to screw down the black clip and then push the door pin over it (as designed), it will stick up too high.
I couldn't be happier. I like them way better than any replacement pins that I have seen.
Trending Topics
When my Coupe arrives, I'll be between these and the JBSPEED AMG metal pins. I wish these were metal, if they were, I'd be on them in a heartbeat...alas, it'll be a tough decision to make.
The Best of Mercedes & AMG
I had to use a pliers to get them started off but just screwed the news ones on with fingers and snugged up with cloth protection and pliers.
The GT door pins just need to be pressed down to lock in place... front and back doors.
I had to use a pliers to get them started off but just screwed the news ones on with fingers and snugged up with cloth protection and pliers.
http://configurator.mercedes-benz-ac...nd_A0007660800
http://configurator.mercedes-benz-ac...nd_A0007660800
).







