2020 C43 Wheel Fitment
#1
Junior Member
Thread Starter
2020 C43 Wheel Fitment
Picking up my new C43 coupe on Friday! Very excited.
I'm getting with the standard 18" wheels and the wheel inset is the only thing I'm not digging about the car. I have a summer wheel and tire setup from my BMW and was wondering if they'd fit. I looked at the wheel fitment post but all the different sizes/offsets/spacers made my head spin. The wheels are:
Front: VMR V710 18x9.5 ET35 5x120 with Hankook Ventus V12 225/45/18
Rear: VMR V710 18x9.5 ET45 5x120 with Hankook Ventus V12 255/40/18
Any help would be greatly appreciated. I love these wheels.
I'm getting with the standard 18" wheels and the wheel inset is the only thing I'm not digging about the car. I have a summer wheel and tire setup from my BMW and was wondering if they'd fit. I looked at the wheel fitment post but all the different sizes/offsets/spacers made my head spin. The wheels are:
Front: VMR V710 18x9.5 ET35 5x120 with Hankook Ventus V12 225/45/18
Rear: VMR V710 18x9.5 ET45 5x120 with Hankook Ventus V12 255/40/18
Any help would be greatly appreciated. I love these wheels.
#2
Picking up my new C43 coupe on Friday! Very excited.
I'm getting with the standard 18" wheels and the wheel inset is the only thing I'm not digging about the car. I have a summer wheel and tire setup from my BMW and was wondering if they'd fit. I looked at the wheel fitment post but all the different sizes/offsets/spacers made my head spin. The wheels are:
Front: VMR V710 18x9.5 ET35 5x120 with Hankook Ventus V12 225/45/18
Rear: VMR V710 18x9.5 ET45 5x120 with Hankook Ventus V12 255/40/18
Any help would be greatly appreciated. I love these wheels.
I'm getting with the standard 18" wheels and the wheel inset is the only thing I'm not digging about the car. I have a summer wheel and tire setup from my BMW and was wondering if they'd fit. I looked at the wheel fitment post but all the different sizes/offsets/spacers made my head spin. The wheels are:
Front: VMR V710 18x9.5 ET35 5x120 with Hankook Ventus V12 225/45/18
Rear: VMR V710 18x9.5 ET45 5x120 with Hankook Ventus V12 255/40/18
Any help would be greatly appreciated. I love these wheels.
#3
Junior Member
Thread Starter
#4
I actually prefer to change wheels to wider ones while keeping closer to the original offset. You get better handling that way. Also less propensity to crab at low speed tight turning. Like 8.5” front and keep the offset to around 30-33, and 10” rear keeping the offset in the low 50s. That way you preserve the handing and road manners. This is what I prefer, but maybe not what everyone else is doing. Spacers are the easier and cheaper way but you end up with very low offsets.
#5
Junior Member
Thread Starter
I actually prefer to change wheels to wider ones while keeping closer to the original offset. You get better handling that way. Also less propensity to crab at low speed tight turning. Like 8.5” front and keep the offset to around 30-33, and 10” rear keeping the offset in the low 50s. That way you preserve the handing and road manners. This is what I prefer, but maybe not what everyone else is doing. Spacers are the easier and cheaper way but you end up with very low offsets.
#6
MBWorld Fanatic!
iTrader: (1)
#7
The bolt pattern is 5/112.