The Official C63 AMG Picture Thread (Post your photos here!)
#3527
Super Member
Join Date: May 2007
Location: Ontario, Canada
Posts: 570
Likes: 0
Received 8 Likes
on
7 Posts
W204 C63 R171
No I did not need spacers these are 8.5x18 ET 35 standard benz wheels they fit a billion different benz cars.
Actually ET 35 means they stick out further away from the center line of the car then the stock 8X18 ET45
The clearance issue here is between the caliper and the wheel barrel there is literally like 4mm I am nervous about using them, any snow or ice build up could maybe rip the caliper off
Here are the specs of every wheel I have used on the car so far
AMG stock
8x18 ET 45
9x18 ET 54
Kleemann
8.5X19 ET35
10X19 ET 60 + 5mm spacer for a final ET55
Brabus S
8.5X18 ET 35
I have a set of Authenic Brabus monoblock V's they are 18" as well they would work but the wheel barrel has a step in it that hits the caliper.
#3529
Super Member
Join Date: May 2007
Location: Ontario, Canada
Posts: 570
Likes: 0
Received 8 Likes
on
7 Posts
W204 C63 R171
I haven't found a set I am in love with either yet. Actually I lied I like alot of things from strasse forged but they are mega expensive
Last edited by andrew c230k; 11-14-2012 at 07:31 PM.
#3532
MBWorld Fanatic!
Beautiful picture Perry.. Ur car looks so cleannn!! A drop & some black ADV would set it off nicely. J/K Lol
#3533
Senior Member
Join Date: Sep 2011
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Diamond White C63 coupe + PP
Yes my car does look clean but there is a lot of work involved to produce that picture. I took it with Canon 1dx and the new 24-70 mkII lens and using a tripod. I then took multiple exposures and the via PS I layer the best parts of the different photos together.
One reason I have to do it is the white paint and the black wheels. Current digital sensors does not have the dynamic range to produce images as we see it.
Perry
#3535
MBWorld Fanatic!
#3540
MBWorld Fanatic!
Thanks Dominik
Call me crazy
EDIT: Ok, the car is officially undriveable on H&R coils at the lowest settings with 10mm spacers and 235/35/19 tires in the front.
Constant rubbing on every little hole in the road...
I have to remove the spacers.
Call me crazy
EDIT: Ok, the car is officially undriveable on H&R coils at the lowest settings with 10mm spacers and 235/35/19 tires in the front.
Constant rubbing on every little hole in the road...
I have to remove the spacers.
Last edited by olszowa12; 11-19-2012 at 08:20 AM.
#3542
MBWorld Fanatic!
#3544
MBWorld Fanatic!
I thought i would share some info for those who would like to fit 20in rims and lower their c63. I have 20x9.5 hre p40? wheels. I have 285s on the rear. I have kw coil overs. The car now sits with the rim about 1mm from the guard. So the tyre sits in the guard. I have zero scrubbing even with a full car load. I have not modified my guards. Its all about rim offset. HRE design the wheel with a +51 offset. I shaved 3mm off the rear to give it a +54 offset, and it fits perfect now. My car is pretty low, to give you an idea i put 265s on the factory rims and they were slightly touching. Hope this info helps
#3545
#3549
MBWorld Fanatic!
Join Date: Sep 2008
Location: Central Florida
Posts: 2,177
Likes: 0
Received 13 Likes
on
12 Posts
2014 Audi RS7