C63 with HRE M47
Thread Starter
Member
Joined: Jan 2008
Posts: 152
Likes: 0
From: Miami, Florida
2004 Audi S4 avant
The car does rub but very little the suspension is going to be raised a bit to fix that problem.
The ride is not bad at all. The car handles great according to TK.
Super Member
Joined: Oct 2008
Posts: 568
Likes: 0
From: Shanghai, Long Island(NY)
C63
Member
Joined: Dec 2008
Posts: 95
Likes: 0
From: Barcelona, Spain
RS4 B5-C63 amg-SL 63 amg
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Super Member
Joined: May 2015
Posts: 600
Likes: 45
From: Minneapolis, MN/Breckenridge, CO
2010 E550 4Matic Sport P2
I know this is an insanely old thread, but the HRE's from this car are for sale. Do you recall the Offset of the rear setup? I saw photos and it appears they were machined either by HRE or a third party and no markings are present. If you recall anything that would be greatly appreciated!
Thank you!
Thank you!
Super Member
Joined: May 2015
Posts: 600
Likes: 45
From: Minneapolis, MN/Breckenridge, CO
2010 E550 4Matic Sport P2
Thank you. The seller is doing some digging and seeing what he can sort out. front is an odd offset and inside barrel of the rears appear to machined way down. It's unclear if it was done by HRE or a third party..... I'm going to hold tight for confirmation.
MBWorld Fanatic!
Joined: May 2010
Posts: 7,860
Likes: 39
From: Ottawa, Ontario, Canada
2010 C63 AMG, 2009 ISF , 2002 L-Tuned IS300, 2011 ML350
Ok I guess I was wrong lol
The offset must be lower than mine that's why they ended up machining/shaving the back plates. All the new HRE have specs engraved on the back of the inner barrel & not on the back plate as the older style wheels.
The offset must be lower than mine that's why they ended up machining/shaving the back plates. All the new HRE have specs engraved on the back of the inner barrel & not on the back plate as the older style wheels.
SPONSOR
Joined: Dec 2010
Posts: 896
Likes: 29
From: So Cal
GT3RS, 356, Raptor, M2, Sprinter 4x4
That! Have him check the rear of the hub. Info will be there. HRE is cool like that.
Super Member
Joined: May 2015
Posts: 600
Likes: 45
From: Minneapolis, MN/Breckenridge, CO
2010 E550 4Matic Sport P2
