Badmeat

I'm selling my HRE wheels, 20x9 front and 20x10 rear. The offset is unknown (I will find out), as I just purchased the 2009 C63 that they came on. Tires are Conti Extremecontact 245/30/20 front, rears will have no tires. I will get tread depth measurements and individual wheel pictures up soon. The wheels have no serious rash, but a couple scuffs that the PO touched up. I love the setup, as they sit very flush with very minimal rubbing (front only), even though the car is lowered on PSS10 suspension. Here are some pictures of them on the car (first pic is when WB installed them).







These wheels retail for $1900 each without tires. Price is $3000, or $3,750 freshly powder-coated any color of your choice with front tires reinstalled. Located in Cincinnati, buyer pays shipping.

Badmeat

Bump

Badmeat

To the top!!!

Abrown3mtg

Subscribed.... potentially interested depending on offsets

Badmeat

The fronts are +39 and the rears are unmarked. The car had a 285/25/20 on the rear and had zero rubbing, even as low as it sits. If I had to guess I'd say +45 to +50. I currently have a call in to Wheels Boutique inquiring what the rear offset is, since they put the wheels on the car back in 2008. I was told by them that they will be able to locate that info, since I know the name of the person that had them installed there.

Here's a pic of how the rear wheel(s) sit:

Abrown3mtg

You can call hre with the serial numbers stamped on the inside of the wheels mounting surface. They can tell you immediately the offsets.

Out of curiosity why are the rear tires not included as well? I'll watch for the condition of the fronts as well.

Offsets matter as the application is not a c63 for me

Thank you.

Badmeat

Fronts-


Rears-


This makes me think that they were machined to a custom offset, possibly?

Rear tires are not included as I got a puncture flat in one, which had thin tread anyway. I can include the one rear PSS if needed. I'll get more pictures up tomorrow, as I'm picking them up from the shop that swapped out wheels.

Abrown3mtg

Hmm... I'll call HRE with the a4h20x9 but am guessing that isn't a serial number for the set... Before I call (and report back) are there any other numbers on the wheels to make note of? The HRE's I had on my Range Rover where a forged custom 3 piece set and had a serial. perhaps the mono blocks are made in advance and shaved down as needed?

Badmeat

No other numbers. I'm assuming they were a more aggressive offset and machined to fit. That's the only explanation I can think of

Abrown3mtg

I'm speculating you are correct. I wish there was a concrete/easy way to measure. If not, I'm sure there will be a very happy c63 owner sporting a set of sweet HRE's soon

Badmeat

Ben @ Wheels Boutique and I exchanged several emails yesterday regarding the mystery offset. His explanation is that these wheels were produced around the time that they began stamping serial numbers on the wheels (the rears are obviously more so before). He's going to contact HRE and get an estimated offset for me.

ENV²

WIsh I could swing those.

Badmeat

Front offset is +39 and rear offset is approximately +55.

BUMP

Badmeat

To the top. Reasonable offers will be considered

Badmeat

Price drop bump. Lowered $500

$2500 as-is or $3,250 freshly powdercoated any color of your choice

Badmeat

Still sitting in the basement collecting dust. Someone save the HREs!

Mag1c Carp3t

I may be interested. Does this new price include shipping?

C63DaKine

will it fit 2005 E55 AMG?

Badmeat

Some quick research shows that around a 10mm spacer will be needed for the rear.

Someone buy these before spring hits and get them out of my basement!

CES99E55

I can save you guys a bunch on shipping as I'm a contractor for FedEx, should help get them sold by easing the cost on shipping. Just shoot me a PM or text me @ (309)370-2657

Good luck...

Badmeat

Still for sale!

Badmeat

Winter time bump

Badmeat

Lots of interest. No one has pulled the trigger yet. Reasonable offers considered.

C300_ED

Goodnight I wonder if you apply to 2015 C300 chassis W205.

Thank you

Badmeat

Lots of interest, but no takers yet. Bump!