Brian you should be more worried about why your phone is disconnected. I called today looking for a CF deck spoiler and your phone said no longer in service

 

this is a pretty lame post imo...its titled as if its a thread to help members decide between the various CF vendors and turns into a bash fest.

Well I ordered a Euroteck piece from Neal a year ago and never put it on until last week and the piece fits perfectly. I love the look of it on my car and Neal was responsive each time I had a question about installing it. Did it hav broken tabs, yes. But I was told in advance it would. To be honest, after reading this thread, I will never buy anything from GTPro.

 

ah, why? you run a business of your own, and you should not resort to public bashing in this manner out of common courtesy; what goes around definitely comes back around. majority of the posters feel as if the resentment carried on from the other thread, so i'd come to good terms with both parties before it gets beyond control. perhaps my advice is of no worth to you, but it's obvious that if continued, this will have a negative effect on your business.

good luck..

 

Everyones true colors coming out.......BTW I have a CF euroteck diffuser and it's perfect.

 

Hey Brian, +1 to what everyone said. I have the lip, diffuser, and trunk spoiler, everything fits perfectly if done by James. I had a lip and trunk spoiler installed on and when I went to James he looked at it and it was all wrong, the trunk spoiler was about to fly off

In all honesty, the weave doesn't match in some areas, but you can only tell if you look really really closely. So I can care less. To me Euroteck is A LOT cheaper than revozsport, or vath, or brabus. Personally I like the design of the revosport diffuser, but the price was a turn off.

 

I have an used Euroteck front lip, CF but painted black, yet to have it installed but it appears to be pretty quality piece that can take a beating from the road.

The scope of this thread is beyond me, hahaha

 

I would'nt criticize Eurotecks's parts when your own products are not so "perfectly" made.

 

 

No response from Brian?

 

... So no Vorsteiner reviews?

 

You guys hit the nail on the head. We got crucified for not checking our product, when it came from our prod. shop, yet when it comes to another vendor's product it's ok for them not to check their product for QC?. I disagree with this logic..We should BOTH be accountable. I am holding our company accountable for trusting our production house, and trust me when I say, that he will not be seeing any of our business anymore. I did my best to help chubbs32, but it did not go as he would have liked, hence the bash on us, and you know rightfully so, I suppose..

I disagree on a few points however, one being that with what James said, ACG did not have another in stock, we were told that this was the only one they had when we ordered the unit. The customer (MBworld user Joe_Money) said "hell no I don't want that on my car, no matter the price", I gave him a full refund and charged him ZERO labor (ask him via PM if you like about this whole ordeal). We felt responsible becuase WE recommended the Euroteck to him, and we did not pull the part out of the box until we had the car torn down (again our fault, we should have QC'd the part ourselves before we tore the car down), so there was NO way I was going to charge him a dime..

Basically I am looking for opinions on everyone's CF product, I am voicing my (and customer Joe_Money) experience with the Euroteck item, no more no less. If ppl disagree with me on this, I am happy to have them here to disagree, however I want input on ALL the CF companies, I don't need to harp on one company. So far, only 3 people here offered up a review of something other than Euroteck..Thank you to Hiro63, Mavrick1975 and MNL ICE. I need to know who's CF product I will start to carry. Could this have been an isolated problem with this one item? possibly, but I did see another thread where someone did an install and the same issues were pointed out on the rear diffuser, I "think" that maybe the general consensus here just might be small defects are ok as long as you can't really see them until up close and the price is right. I just could not understand the broken off tabs thing..Who knows maybe I'm being too picky and a jerk?

 

GT PRO, you are vendor and I assume you are or were a dealer/reseller of Euroteck, so why not just take this up them through personal phone call or a direct email. Nothing good will come out of this with discussing the matter on a public forum. If you honestly wanted opinions on carbonfiber products, do not lace it with a negative review with another product. It would be best of your interest to allow the end user who purchased the product to file a complaint instead of you doing it on his behalf.

 

Thank you all for the positive reviews on the Euroteck Motorsports products. ONE Autosport is one of the LARGEST dealer for Euroteck products worldwide. Feel free to order from us in the future if you are interested

Also, this thread was obviously meant to give Neal a black eye, but I guess that didn't quite work out... Anyway, subtility didn't work out this time lol.

Oh and if anyone wanna order Forgestar, Avantgarde or iForged wheels, or anything else, email me! /shameless plug.

 

I'm going to post this on behalf of gravedgr, I hope he doesn't mind me using it.



Also what's the install time on a rear diffuser < 1hr time and less than $100?

 

Actually 10 minutes!

 

Get the Suvneer part!

 

I hAve revsport carbon diffuser, I can tell you it is not a straight fit it had to be modified to fit and does not sit 100% flush how ever it does look good, only a close eye could tell and it needs a little work to fit it. I am very happy with the look now

 

What had to be modify in order to make it fit? And how did you modify it? Thanks.

 

i bought them from evosport they are very good but expensive. and u have to be careful going over speed humps because the front spliter is low. but it gives the car a race car look

 

The tabs on the corners (Left and right) had to be cut thinner, lucky we had a die grinder which did the job very easy for us. We also had to modify were the L shaped bars that hold the rear bar in place screw into, had no holes in the carbon fibre piece so we had to measure up, trial fit and adjust and re-screw holes until it sat perfect. So it was a **** around to do. Once we got it sitting right, the outer tabs (both sides) did not sit correctly causing the diffuser around the exhaust not to sit flush with the bar, so we had to trim and modify the tabs significantly.

I do not recommend fitting this part at home if you have no experience with body work.

h.

 

Youch. Thanks for the info. Sounds like quite a bit of work for a piece that costs so much $$$.

 

+1 for Neal, recently installed front lips and rear diffusers. Quality stuff.

 

I would be careful of Revozport, ordered/paid for parts 2 months ago and it is like they dropped off the planet. No parts and no respose to emails, nada.

 

I ordered the Suvneer rear diffuser and none of the tabs matched up. The quality was pretty cheap.

 

Vorsteiner +1:



I wasn't present for the install, but the fit is really good and the weave is very clean and nice.

Josh