SHOULD I GET THESE????
#1
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Taiwan
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Supercharged E92 M3
SHOULD I GET THESE????
they are expensive but I've never used ceramic brakes in my life.
F380x40mm 6 piston
R380x32mm 4piston
full Ceramic
![](http://public.bay.livefilestore.com/y1p5FqLhUZlS_rjaNBUNRizchPUvgQDVpGul1d_xoNXvHFm0mYEuuLnTQM87LH41hBDowu-929YBCxRAkX5ftvZHQ/10aba5ee4e.jpg?psid=1)
![](http://public.bay.livefilestore.com/y1pjd04Kny7fp-Mm2jCcLgQx86i8A0Hec7qNFtwuAcavzNzqrZyAOWQhZ8IddWHBxZ-qzql8ADWKNQRE3rSwr0bew/355ae677c4.jpg?psid=1)
![](http://public.bay.livefilestore.com/y1pSrhOlcrxJiYSvjYJKb7xZ_MhRK5oWL6XxkUXQpCqWGzJipPLPOtAO8MZjwnqinNoAZgOcfhf_-f9130NYnd41Q/8768b88b1b.jpg?psid=1)
F380x40mm 6 piston
R380x32mm 4piston
full Ceramic
![](http://public.bay.livefilestore.com/y1p5FqLhUZlS_rjaNBUNRizchPUvgQDVpGul1d_xoNXvHFm0mYEuuLnTQM87LH41hBDowu-929YBCxRAkX5ftvZHQ/10aba5ee4e.jpg?psid=1)
![](http://public.bay.livefilestore.com/y1pjd04Kny7fp-Mm2jCcLgQx86i8A0Hec7qNFtwuAcavzNzqrZyAOWQhZ8IddWHBxZ-qzql8ADWKNQRE3rSwr0bew/355ae677c4.jpg?psid=1)
![](http://public.bay.livefilestore.com/y1pSrhOlcrxJiYSvjYJKb7xZ_MhRK5oWL6XxkUXQpCqWGzJipPLPOtAO8MZjwnqinNoAZgOcfhf_-f9130NYnd41Q/8768b88b1b.jpg?psid=1)
![](http://public.bay.livefilestore.com/y1prM_tuiKiLvf1-BYKtbhG9h240tuzwaJhG9eCeIbGi8hpsls02h80bSiz374JakFf9EbncF8oUUkUWMfK9hFBiQ/37754_1533912793293_1399008077_31454472_3423884_n.jpg?psid=1)
#2
Super Member
Join Date: Sep 2009
Location: Seattle, WA
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG
Unless you track your car, I don't think you'll really need them or be able to take full advantage of them. Besides, they'll likely be squeaky and scary early in the mornings until they've warmed up.
#3
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Taiwan
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Supercharged E92 M3
FOR ME RIGHT NOW ITS EITHER THE GTR BREMBO OR MOVIT CERAMIC
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
#4
MBWorld Fanatic!
Join Date: Sep 2008
Posts: 4,336
Likes: 0
Received 7 Likes
on
7 Posts
Porsche 991S, Cayenne S, 1972 BMW 3.0CS E9 Coupe
I had PCCBs on a 997 before and they really don't perform that radically different on the track during DEs than the steel Big Reds do. Fade seems almost equal, imho. But the PCCBs don't eat pads as much on the track, so I assumed that they probably weren't heating up quite as much. I think it's just that the Big Reds dissipate heat pretty well so fade felt close to the PCCBs.
But you have a lot less unsprung weight and rotational mass which is the biggest noticeable advantage, imho. That's the big plus.
The only advantages on the street are way less brake dust and that they last longer than conventional rotors. And you shouldn't go through pads as often. Otherwise you won't really notice a huge difference in real world daily driving, imho. The C63 has excellent brakes as it is.
Whether the price is worth that is up to you.
Edit: never mind about the C63 brakes, I see you have the M3. By all means get better brakes!! I think the OEM brakes are the biggest weak link in the M3.
But you have a lot less unsprung weight and rotational mass which is the biggest noticeable advantage, imho. That's the big plus.
The only advantages on the street are way less brake dust and that they last longer than conventional rotors. And you shouldn't go through pads as often. Otherwise you won't really notice a huge difference in real world daily driving, imho. The C63 has excellent brakes as it is.
Whether the price is worth that is up to you.
Edit: never mind about the C63 brakes, I see you have the M3. By all means get better brakes!! I think the OEM brakes are the biggest weak link in the M3.
Last edited by 220S; 08-02-2010 at 03:51 AM.
#5
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Taiwan
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Supercharged E92 M3
I had PCCBs on a 997 before and they really don't perform that radically different on the track during DEs than the steel Big Reds do. Fade seems almost equal, imho. But the PCCBs don't eat pads as much on the track, so I assumed that they probably weren't heating up quite as much. I think it's just that the Big Reds dissipate heat pretty well so fade felt close to the PCCBs.
But you have a lot less unsprung weight and rotational mass which is the biggest noticeable advantage, imho. That's the big plus.
The only advantages on the street are way less brake dust and that they last longer than conventional rotors. And you shouldn't go through pads as often. Otherwise you won't really notice a huge difference in real world daily driving, imho. The C63 has excellent brakes as it is.
Whether the price is worth that is up to you.
Edit: never mind about the C63 brakes, I see you have the M3. By all means get better brakes!! I think the OEM brakes are the biggest weak link in the M3.
But you have a lot less unsprung weight and rotational mass which is the biggest noticeable advantage, imho. That's the big plus.
The only advantages on the street are way less brake dust and that they last longer than conventional rotors. And you shouldn't go through pads as often. Otherwise you won't really notice a huge difference in real world daily driving, imho. The C63 has excellent brakes as it is.
Whether the price is worth that is up to you.
Edit: never mind about the C63 brakes, I see you have the M3. By all means get better brakes!! I think the OEM brakes are the biggest weak link in the M3.
you know I never got this kind of information on the BMW forums. Nice to have friends in different places.
#7
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Taiwan
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Supercharged E92 M3
Trending Topics
#9
From the Mov it website
Die ideale Lösung dafür ist die Keramikanlage MOV´IT Ceramic GEN.3 mit 380x40 Millimeter großen Scheiben und 6 Kolben BILLET Sattel an der Vorderachse (11.412 Euro inklusive Mehrwertsteuer) sowie 380x32 Millimeter großen Scheiben mit 4 Kolben BILLET Sattel an den Hinterrädern (9812 Euro). MOV´IT bietet das gesamte Bremssystem für den BMW M3 inklusive eines TÜV-Gutachtens an, damit der Fahrer dieses problemlos in die Fahrzeugpapiere eintragen lassen kann.
380x40 Front 6 piston calipers, 11.412 Euro including 19% VAT
380x32 Rear 4 piston calipers, 9812 Euro including 19% VAT
included is a German TÜV certificate.
380x40 Front 6 piston calipers, 11.412 Euro including 19% VAT
380x32 Rear 4 piston calipers, 9812 Euro including 19% VAT
included is a German TÜV certificate.
#10
MBWorld Fanatic!
Die ideale Lösung dafür ist die Keramikanlage MOV´IT Ceramic GEN.3 mit 380x40 Millimeter großen Scheiben und 6 Kolben BILLET Sattel an der Vorderachse (11.412 Euro inklusive Mehrwertsteuer) sowie 380x32 Millimeter großen Scheiben mit 4 Kolben BILLET Sattel an den Hinterrädern (9812 Euro). MOV´IT bietet das gesamte Bremssystem für den BMW M3 inklusive eines TÜV-Gutachtens an, damit der Fahrer dieses problemlos in die Fahrzeugpapiere eintragen lassen kann.
380x40 Front 6 piston calipers, 11.412 Euro including 19% VAT
380x32 Rear 4 piston calipers, 9812 Euro including 19% VAT
included is a German TÜV certificate.
380x40 Front 6 piston calipers, 11.412 Euro including 19% VAT
380x32 Rear 4 piston calipers, 9812 Euro including 19% VAT
included is a German TÜV certificate.
#11
Right. I tried the cliff notes version below the German but since that didn't work...
Translation:
The ideal solution for the situation is the Ceramic brake GEN. 3 package with 380x40 Millimeter sized discs and 6 piston caliper on the front axle. (11.412 Euro including VAT) as well as the 380x32 Millimeter sized discs with 4 piston calipers on the rear axle.(9812 Euro). MOV´IT offers the whole brake system for the BMW M3 including a TÜV certificate, so that without any problems the driver can record this system on their cars paperwork. (Required in Germany, and maybe elsewhere, I only know about Germany.)
Translation:
The ideal solution for the situation is the Ceramic brake GEN. 3 package with 380x40 Millimeter sized discs and 6 piston caliper on the front axle. (11.412 Euro including VAT) as well as the 380x32 Millimeter sized discs with 4 piston calipers on the rear axle.(9812 Euro). MOV´IT offers the whole brake system for the BMW M3 including a TÜV certificate, so that without any problems the driver can record this system on their cars paperwork. (Required in Germany, and maybe elsewhere, I only know about Germany.)
#14
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#15
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Taiwan
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Supercharged E92 M3
I do visit German quit a bit for business but I still have to learn it.
I actually got offered a promotional discount because I would be the first to buy these brakes so.......
I got offered : $24,000 usd front and rear.
for the brembo GTR I didn't get any super discount or what not. so I think my final price was $15,000 usd front and rear.
I asked if I could transfer the brakes on to my car and this was his reply
And yes we can transfer almost full system to the next car, 100% in the front, only need new hat and bracket.
Rear depends on the chassis, but I think bimmer will be no problem.
so I said I would think about. then he came back with a very interesting spec.
the disc from MOVIT never less a mm since Generation 2, 396x36mm on RS6 after 2 years and 25000km, still 36mm !!
so basically if I buy a new M5 and put 900HP on it I will have the brakes way longer the most of my cars.
and asia is stop and go traffic most of the time.
what a tuff choice
I actually got offered a promotional discount because I would be the first to buy these brakes so.......
I got offered : $24,000 usd front and rear.
for the brembo GTR I didn't get any super discount or what not. so I think my final price was $15,000 usd front and rear.
I asked if I could transfer the brakes on to my car and this was his reply
And yes we can transfer almost full system to the next car, 100% in the front, only need new hat and bracket.
Rear depends on the chassis, but I think bimmer will be no problem.
so I said I would think about. then he came back with a very interesting spec.
the disc from MOVIT never less a mm since Generation 2, 396x36mm on RS6 after 2 years and 25000km, still 36mm !!
so basically if I buy a new M5 and put 900HP on it I will have the brakes way longer the most of my cars.
and asia is stop and go traffic most of the time.
what a tuff choice
#17
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Taiwan
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Supercharged E92 M3
Well my car is the fastest in Asia right now! I'm breaking in my new motor as I speak.
I got a built motor done to my car and lower compression. also a new larger supercharger set up.
I also installed a new clutch that can handle 900whp.
my car will hit about 650-660whp on a AWD dyno dynamic. And believe me these dynos read low.
I'm still thinking about which brakes! thanks! You guys are great with all the friendly advise
Eugene
#18
Super Member
Join Date: Sep 2009
Location: denver,CO
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
2009 c63, 2011 GT500
Well my car is the fastest in Asia right now! I'm breaking in my new motor as I speak.
I got a built motor done to my car and lower compression. also a new larger supercharger set up.
I also installed a new clutch that can handle 900whp.
my car will hit about 650-660whp on a AWD dyno dynamic. And believe me these dynos read low.
I'm still thinking about which brakes! thanks! You guys are great with all the friendly advise
Eugene
I got a built motor done to my car and lower compression. also a new larger supercharger set up.
I also installed a new clutch that can handle 900whp.
my car will hit about 650-660whp on a AWD dyno dynamic. And believe me these dynos read low.
I'm still thinking about which brakes! thanks! You guys are great with all the friendly advise
Eugene
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#21
Dude,
Mov'it seem like great guys and I've heard nothing but good about their products - specially from Porsche guys. However, the price on these is just crazy! (and I don't normally say this). For that sort of money, I'd go with AP. If you need something larger than they have for their kit, simply call them up and talk to them. They do rotors in all sorts of sizes and I'm sure they can accommodate your needs (for a price, likely less than these ceramics).
Mov'it seem like great guys and I've heard nothing but good about their products - specially from Porsche guys. However, the price on these is just crazy! (and I don't normally say this). For that sort of money, I'd go with AP. If you need something larger than they have for their kit, simply call them up and talk to them. They do rotors in all sorts of sizes and I'm sure they can accommodate your needs (for a price, likely less than these ceramics).
#22
For the price not worth it at all. You are better off just getting two-piece lightweight steel rotors to shave of a bunch of unsprung mass and getting stainless steel brake lines. Steel rotors gives you better pedal feedback anyways.
The most you should be spending on brakes is a good 2-3k. 10x that price is difficult to justify .... even for Bill Gates ... especially on a car that is technically normal road car.
The most you should be spending on brakes is a good 2-3k. 10x that price is difficult to justify .... even for Bill Gates ... especially on a car that is technically normal road car.
#23
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Taiwan
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Supercharged E92 M3
Dude,
Mov'it seem like great guys and I've heard nothing but good about their products - specially from Porsche guys. However, the price on these is just crazy! (and I don't normally say this). For that sort of money, I'd go with AP. If you need something larger than they have for their kit, simply call them up and talk to them. They do rotors in all sorts of sizes and I'm sure they can accommodate your needs (for a price, likely less than these ceramics).
Mov'it seem like great guys and I've heard nothing but good about their products - specially from Porsche guys. However, the price on these is just crazy! (and I don't normally say this). For that sort of money, I'd go with AP. If you need something larger than they have for their kit, simply call them up and talk to them. They do rotors in all sorts of sizes and I'm sure they can accommodate your needs (for a price, likely less than these ceramics).
For the price not worth it at all. You are better off just getting two-piece lightweight steel rotors to shave of a bunch of unsprung mass and getting stainless steel brake lines. Steel rotors gives you better pedal feedback anyways.
The most you should be spending on brakes is a good 2-3k. 10x that price is difficult to justify .... even for Bill Gates ... especially on a car that is technically normal road car.
The most you should be spending on brakes is a good 2-3k. 10x that price is difficult to justify .... even for Bill Gates ... especially on a car that is technically normal road car.
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
hook it up Bro!
its nice if its lightweight calipers and 2pc rotors
#24
Well my car is the fastest in Asia right now! I'm breaking in my new motor as I speak.
I got a built motor done to my car and lower compression. also a new larger supercharger set up.
I also installed a new clutch that can handle 900whp.
my car will hit about 650-660whp on a AWD dyno dynamic. And believe me these dynos read low.
I'm still thinking about which brakes! thanks! You guys are great with all the friendly advise
Eugene
I got a built motor done to my car and lower compression. also a new larger supercharger set up.
I also installed a new clutch that can handle 900whp.
my car will hit about 650-660whp on a AWD dyno dynamic. And believe me these dynos read low.
I'm still thinking about which brakes! thanks! You guys are great with all the friendly advise
Eugene
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)