Staff@RPM

Hub Centric Mercedes wheel spacers

5 on 112 Mercedes Benz 66.56mm Center Bore

Available in-
13mm thickness -$28.00 each
17mm thickness- $30.00 each
20mm thickness- $32.00 each

Conical seat lug nuts available in different lengths for-
-$3.00 each

This pricing is incredible, compare to everyone else and you will find no comparison from the competition.

BAD430BENZ

the best thing about you guys is that you are not hiding the price like most others vendors do . i don't know why the price of things is under national security . you get a big .

Sincity

Can I still PM you for pricing?

_AMG_

Are they hubcentric spacers?

Staff@RPM

YES, they are Hub Centric.

1Lop2K5C

what would one need to push out the stock wheels a little bit?

Staff@RPM

Hopefully you like the prices too!!!!

Staff@RPM

A 13mm thick spacer is 1/2"

Staff@RPM

Here are some photos-

olszowa12

Has anyone installed spacers on their C63?

I'm installing my H&R Springs next week and am considering spacers, as well. Any pics? Or recomendations?

dodger63

No but if you want I'll be at rpm tomorrow and we can test fit take pictures and post the different sizes if you guys would like!

obsidian05e55

Same here.. Did H&R coilovers, and think it would look much more aggressive with spacers..

This still available?

avengerboater

I have 5mm spacers on my rears. They're fine.

obsidian05e55

So 13mm is going to be too much? Especially on lowered cars?

bli8

Did you continue to use the stock bolts? If so, how many turns can you turn the bolts before they are to torque spec?

Faris63

Can you please pm price of 4 spacers with bolts to for stock set-up to push it little bit

avengerboater

No. I had to order longer bolts that were 5mm longer than the stock bolts. The thing with the Merc is that the bolt lengths need to be pretty exact, otherwise it may hit and damage the ABS.

avengerboater

I would think so. I'd worry about rubbing issues, especially with fatter tires. But I don't know, there are a couple people on here running 10mm spacers and they seem to be fine.

olszowa12

Dodger that would be great could you test the 13mm and 20mm ones and take pics?

Do you have lowering springs or coilovers on your C63 ?

obsidian05e55

RPM, still have these?

Staff@RPM

Did you get your spacers today?

obsidian05e55

I dont know. I'm at the office. Hope they're at the house.

Thanks Craig!

obsidian05e55

Got the spacers. Only installed the rears. Looks great! Rubs under full compression, probly shouldve went with 5-8mm. The fronts I think are gonna be a problem, but didnt try them yet.

Here is the rear. 19x9.5 ET50, 10mm spacer..ET40 now..

Mort

Are these spacers still available?

BK63amg

FWIW I'm running 12mm in the front and 8mm in the rear...perfectly flush with slight rubbing in rear under full compression.