Dads Performance offers the Louvered Hood!!
#51
Former Vendor of MBWorld
Thread Starter
I believe I am going to use Stone Carbon to make this hood. Carl has been good to work with and I believe there are some quality advantages also. They already have the one vented hood on the market and I spoke to a couple of people with that hood and they said the fit and finish was excellent. Does anyone else have any input that has the Stone Carbon hood or products?
Carl has been very aggressive to make this hood and can make it a little quicker also.
Carl has been very aggressive to make this hood and can make it a little quicker also.
#52
Senior Member
Join Date: Dec 2008
Location: Central Florida
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
STS, Tahoe, Suzuki, and C63
#55
Banned
Join Date: Aug 2007
Posts: 2,735
Likes: 0
Received 1 Like
on
1 Post
CLK 63 Black Series, 2009 S550, 2011 Range Rover Supercharged, BMW F800 GS Anniv Edition
Well it is also a C class body and the increase in width is made up by the fenders...I know it's a stretch but I thought I'd ask as my underhood temps are WAY high
#56
It would seem like this or something comparable is a must for the track.
#57
Banned
Join Date: Aug 2007
Posts: 2,735
Likes: 0
Received 1 Like
on
1 Post
CLK 63 Black Series, 2009 S550, 2011 Range Rover Supercharged, BMW F800 GS Anniv Edition
This is a cool thread. I really like mods that increase performance simply from better design / R&D instead of mechanical and/or bolt on's. On hot days, I can tell that the car is WAY down on power and know that this hood would make a huge difference.
#58
MBWorld Fanatic!
Join Date: Oct 2008
Location: Central Florida
Posts: 1,521
Likes: 0
Received 3 Likes
on
3 Posts
2013 Chevy 427 Torch Red
Just looking at pictures of the two cars the hoods are very different from one another. But if this can be done to one hood it can be done to another. I wouldn't be surprised if you could get several BS owners to start a similiar project.
#59
Banned
Join Date: Aug 2007
Posts: 2,735
Likes: 0
Received 1 Like
on
1 Post
CLK 63 Black Series, 2009 S550, 2011 Range Rover Supercharged, BMW F800 GS Anniv Edition
Oddly enough - each part that has failed with this car has been heat related. The cam sensor and the parking brake cable both failed from what the factory called "excessive heat".
#60
It does actually have side heat extractors/vents but they don't do much - I've checked...the additional coolers help, but if pushed hard (10/10ths) it will go into limp mode (transmission). Usually after a hard drive I'll open the hood to let it cool faster...and it is so hot under there you can't touch anything without being burned. Even the strut bar gets so hot that you cannot touch it.
This is a cool thread. I really like mods that increase performance simply from better design / R&D instead of mechanical and/or bolt on's. On hot days, I can tell that the car is WAY down on power and know that this hood would make a huge difference.
This is a cool thread. I really like mods that increase performance simply from better design / R&D instead of mechanical and/or bolt on's. On hot days, I can tell that the car is WAY down on power and know that this hood would make a huge difference.
Sounds like the BS already has some good measures to combat heat. With a custom hood like this one, maybe just a different design, your car would really benefit during those track days.
I think this hood looks real good on the C. But I can understand how it might be a bit much on the CLK BS.
#62
Former Vendor of MBWorld
Thread Starter
LZH,
I got with the local dealership and they confirmed that the two hoods are not compatable. Sorry about that but thanks for the kind words.
I am sure your local body shop can add the louvers or just add the vents as you would like since it would be a one off. The rear vents were very easy to do.
I got with the local dealership and they confirmed that the two hoods are not compatable. Sorry about that but thanks for the kind words.
I am sure your local body shop can add the louvers or just add the vents as you would like since it would be a one off. The rear vents were very easy to do.
#63
Former Vendor of MBWorld
Thread Starter
Great news! One more to the list!!
Christmas Special - 10% discount on the above prices for this original order!!
1. Dads C63 - Carbon Fiber
2. Hughes1 - Carbon Fiber
3. Dodger63 - Carbon Fiber
4. bhamg - Carbon Fiber
5. PetroC55 - FRP
6. SonnyakaPig - will advise
7.
8.
9.
10.
THANK YOU!!!!!!!
Christmas Special - 10% discount on the above prices for this original order!!
1. Dads C63 - Carbon Fiber
2. Hughes1 - Carbon Fiber
3. Dodger63 - Carbon Fiber
4. bhamg - Carbon Fiber
5. PetroC55 - FRP
6. SonnyakaPig - will advise
7.
8.
9.
10.
THANK YOU!!!!!!!
#64
MBWorld Fanatic!
I believe I am going to use Stone Carbon to make this hood. Carl has been good to work with and I believe there are some quality advantages also. They already have the one vented hood on the market and I spoke to a couple of people with that hood and they said the fit and finish was excellent. Does anyone else have any input that has the Stone Carbon hood or products?
Carl has been very aggressive to make this hood and can make it a little quicker also.
Carl has been very aggressive to make this hood and can make it a little quicker also.
#65
Former Vendor of MBWorld
Thread Starter
Guys,
Just an advisory to those that have placed an order and those that are thinking about it. The hood is shipping Monday DHL to Carl at Stone Carbon and that takes about 7-10 days for transit. Then they can get started. If you are making a decision about ordering you have about two to three more weeks to ponder it before I have to give Carl a firm count and material. Then the order will be in process. Thank you again to those that have already placed their order!!
If no one else places an order then I'll eat the tooling charge and we'll only make six hoods. Just makes them more individual.
Ya'll have a great weekend!!
Just an advisory to those that have placed an order and those that are thinking about it. The hood is shipping Monday DHL to Carl at Stone Carbon and that takes about 7-10 days for transit. Then they can get started. If you are making a decision about ordering you have about two to three more weeks to ponder it before I have to give Carl a firm count and material. Then the order will be in process. Thank you again to those that have already placed their order!!
If no one else places an order then I'll eat the tooling charge and we'll only make six hoods. Just makes them more individual.
Ya'll have a great weekend!!
#66
MBWorld Fanatic!
Join Date: Nov 2006
Location: California, USA
Posts: 9,137
Likes: 0
Received 4 Likes
on
4 Posts
E63 P30, CL500 Sport
You guys are so lucky to have Keith make these hoods for the C63.... I wish we had a hood like that for the E63
Honestly, this hood is definitely a great addition to the C-Class, as it makes the car look more aggressive yet still sporty and stylish.... indeed very unique. If you ever think you may want one, this is the time to get it
Honestly, this hood is definitely a great addition to the C-Class, as it makes the car look more aggressive yet still sporty and stylish.... indeed very unique. If you ever think you may want one, this is the time to get it
#67
You guys are so lucky to have Keith make these hoods for the C63.... I wish we had a hood like that for the E63
Honestly, this hood is definitely a great addition to the C-Class, as it makes the car look more aggressive yet still sporty and stylish.... indeed very unique. If you ever think you may want one, this is the time to get it
Honestly, this hood is definitely a great addition to the C-Class, as it makes the car look more aggressive yet still sporty and stylish.... indeed very unique. If you ever think you may want one, this is the time to get it
#68
Senior Member
Join Date: Oct 2005
Location: Melbourne, Australia
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG
mate, good choice to use carl, he is a top guy with excellent customer services.
actually, i will visit him and his workshop end of this year.
all the best for ur project
actually, i will visit him and his workshop end of this year.
all the best for ur project
#69
Member
Join Date: Dec 2009
Location: Sydney, Australia
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
2010 C63, 2008 Audi TT Roadster (Sold)
Hi Keith,
Sensational looking hood! VERY interested in grabbing an FRP hood. Where are the hoods shipping from? Are you able to give me an idea of shipping to Sydney, Australia? Would prefer slow/cheap shipping.
Cheers,
John
Sensational looking hood! VERY interested in grabbing an FRP hood. Where are the hoods shipping from? Are you able to give me an idea of shipping to Sydney, Australia? Would prefer slow/cheap shipping.
Cheers,
John
#70
Former Vendor of MBWorld
Thread Starter
John,
The hood can ship direct from Stone Carbon in Hong Kong. Here is Carl's reply to your question.
Hi Keith,
The sea freight to the Sydney sea port is US$285, 15-20 days on the sea.
This cost does not include the clear custom cost and import cost
and tax and local Sydney sea port cost in the Sydney side.
Thank you for your interest.
The hood can ship direct from Stone Carbon in Hong Kong. Here is Carl's reply to your question.
Hi Keith,
The sea freight to the Sydney sea port is US$285, 15-20 days on the sea.
This cost does not include the clear custom cost and import cost
and tax and local Sydney sea port cost in the Sydney side.
Thank you for your interest.
#71
Member
Join Date: Dec 2009
Location: Sydney, Australia
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
2010 C63, 2008 Audi TT Roadster (Sold)
John,
The hood can ship direct from Stone Carbon in Hong Kong. Here is Carl's reply to your question.
Hi Keith,
The sea freight to the Sydney sea port is US$285, 15-20 days on the sea.
This cost does not include the clear custom cost and import cost
and tax and local Sydney sea port cost in the Sydney side.
Thank you for your interest.
The hood can ship direct from Stone Carbon in Hong Kong. Here is Carl's reply to your question.
Hi Keith,
The sea freight to the Sydney sea port is US$285, 15-20 days on the sea.
This cost does not include the clear custom cost and import cost
and tax and local Sydney sea port cost in the Sydney side.
Thank you for your interest.
#72
Former Vendor of MBWorld
Thread Starter
Great news! One more to the list!!
Christmas Special - 10% discount on the above prices for this original order!!
1. Dads C63 - Carbon Fiber
2. Hughes1 - Carbon Fiber
3. Dodger63 - Carbon Fiber
4. bhamg - Carbon Fiber
5. PetroC55 - FRP
6. SonnyakaPig - will advise
7. gyrex - FRP
8.
9.
10.
THANK YOU!!!!!!!
Christmas Special - 10% discount on the above prices for this original order!!
1. Dads C63 - Carbon Fiber
2. Hughes1 - Carbon Fiber
3. Dodger63 - Carbon Fiber
4. bhamg - Carbon Fiber
5. PetroC55 - FRP
6. SonnyakaPig - will advise
7. gyrex - FRP
8.
9.
10.
THANK YOU!!!!!!!