C63 Black Series Satin Wrap timelapse vid
Former Vendor of MBWorld
Joined: Feb 2011
Posts: 947
Likes: 3
A car
[quote=LangeOne;5162595]
I do not have the Black Series wheel weights yet to say.
However, I can give estimates for our wheels. A sample weight of a P40SC in 20x11 for a CLS63 was 22.4 lbs. I'm positive the OE wheel will be heavier, but I'm not sure yet.
I will find out in May since we are working on a Black Series C63.
However, I can give estimates for our wheels. A sample weight of a P40SC in 20x11 for a CLS63 was 22.4 lbs. I'm positive the OE wheel will be heavier, but I'm not sure yet.
I will find out in May since we are working on a Black Series C63.
Thread Starter
MBWorld Fanatic!
Joined: Dec 2002
Posts: 1,669
Likes: 63
From: Montana/Alberta
C63 BS, GLA45
I'm interested in the P43 as well, depending on how wide you can go and how much tire you can fit. Is it possible to get the same color scheme as the factory wheel (matte black + silver lip)? I know ADV.1 can't do it for their monoblocks.
Most importantly, need to know if it can fit 305's without rubbing. When I did some initial measurements of the car on a hoist, there's a lot less room than my CLK63 Black Series, which was pretty tight to clear 305's on 19x11's (had to roll the fender). The C63 BS's fender is already rolled from the factory so there's no extra mm's to be had.
Fronts are easy, lots of room, just the rears look to be a bit challenging and have to be perfect.
Most importantly, need to know if it can fit 305's without rubbing. When I did some initial measurements of the car on a hoist, there's a lot less room than my CLK63 Black Series, which was pretty tight to clear 305's on 19x11's (had to roll the fender). The C63 BS's fender is already rolled from the factory so there's no extra mm's to be had.
Fronts are easy, lots of room, just the rears look to be a bit challenging and have to be perfect.
Former Vendor of MBWorld
Joined: Feb 2011
Posts: 947
Likes: 3
A car
Please let me know if you got anymore questions. Email me directly at LonM@hrewheels.com
Newbie
Joined: Nov 2016
Posts: 1
Likes: 0
2014 Mustang GT
http://www.youtube.com/watch?v=ZdZ3b7bQ5SU&hd=1
Some details on the wrap + full gallery:
http://www.beyond.ca/project-black-s...pse/14616.html
And of course some of the photos from the post:
Some details on the wrap + full gallery:
http://www.beyond.ca/project-black-s...pse/14616.html
And of course some of the photos from the post:
I called a few in my area that said they could do it, but they won't do my headlights/tailights etc. Should I find a shop that does it all like you do? I live in the Denver area. What would you recommend?
