Sorry I know this been discussed numerous times, but i would like to make sure if the Xpipe for secondary cats delete are 3" ? and how many " straight-pipe for resonator delete
Thank you !
Thank you !
so 2.5 - 3.0 " is fine? 
might ask a friend to custom make it for me
might ask a friend to custom make it for me
Member
When I had my resonator replaced with straight pipe they used 2.5"
MBWorld Fanatic!
You make it the same size as the stock exhaust diameter, not smaller or bigger.
Make sure the exchange area is a decent size and your bends going into it dont curve too much.
Make sure the exchange area is a decent size and your bends going into it dont curve too much.
Quote:
okay thank you, so i m guessing i need 2.5" for both to fit the stockOriginally Posted by peh-amg
When I had my resonator replaced with straight pipe they used 2.5"
Quote:
Make sure the exchange area is a decent size and your bends going into it dont curve too much.
Thanks for the info !Originally Posted by Merc63
You make it the same size as the stock exhaust diameter, not smaller or bigger.Make sure the exchange area is a decent size and your bends going into it dont curve too much.
MBWorld Fanatic!
Here's some I made with my bro.
Two U bends cut and welded together.
Two U bends cut and welded together.
