Help with Check Engine Light Pleaseeeee
#1
Member
Thread Starter
Join Date: Apr 2012
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2009 C63 AMG
Help with Check Engine Light Pleaseeeee
So today i was driving to the car wash when a few miles down the road i noticed my check engine light came on. No Error messages, just the light. So i decided to stop by the local Advance Auto Parts to use their code scanner. Oddly enough the scanner won't link to the AMG..Weird? I tried multiple times to scan it over and over and no luck. Well i went to Autozone instead. They hooked it up and the same issue. Error To Link to vehicle.
I don't know what it could be honestly. I know the weather has been crazy hot lately, but i drove the car all day yesterday in 100+F and it drove fine.
Is there an alternative way to check the code or maybe reset the light completely? As of now i am taking it to the service tomorrow afternoon and let them see if they can connect to it and figure out the issue.
The car however seems to drive just fine, shifts fine, and starts without problems. No hesitation what so ever.
Anyone experience similar issues like this?
I don't know what it could be honestly. I know the weather has been crazy hot lately, but i drove the car all day yesterday in 100+F and it drove fine.
Is there an alternative way to check the code or maybe reset the light completely? As of now i am taking it to the service tomorrow afternoon and let them see if they can connect to it and figure out the issue.
The car however seems to drive just fine, shifts fine, and starts without problems. No hesitation what so ever.
Anyone experience similar issues like this?
#5
Member
Thread Starter
Join Date: Apr 2012
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2009 C63 AMG
#7
Member
Thread Starter
Join Date: Apr 2012
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2009 C63 AMG
Trending Topics
#10
MBWorld Fanatic!
Join Date: Feb 2009
Location: Northern NJ
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
2009 C63
see thread https://mbworld.org/forums/c63-amg-w...orking-mb.html
My Actron CP9325 didn't work either, but the 9125 works. I think it was like $50.
My Actron CP9325 didn't work either, but the 9125 works. I think it was like $50.
Last edited by drawde; 07-08-2012 at 10:38 PM.
#12
had the same issue ... but they replaced the manifold ... but now it's back on ..... just got it back on friday .... Oh well ... yet another round of loaner car to ..... drive mildly
#13
Member
Thread Starter
Join Date: Apr 2012
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2009 C63 AMG
Why are these Cars having this CEL issue..This is ridiculous..For a hand built motor things like these shouldn't be happening..Its frustrating. Im so close to trading this car in and going back to BMW
#16
MBWorld Fanatic!
Join Date: Oct 2008
Location: Central Florida
Posts: 1,521
Likes: 0
Received 3 Likes
on
3 Posts
2013 Chevy 427 Torch Red
I use this code reader from Harbor Freight and it's under $100. Any modification even just removing secondary cats will cause an occasional CEL and this tool provides peace of mind and a way to erase the code.
http://www.harborfreight.com/obd-ii-...ner-99722.html
PS: I would be surprised if your 09 hadn't already had the purge valve issue resolved in it's first year.
#17
Super Member
Got mine from sears , the ones from the auto parts store did not work for me....
#19
Member
Thread Starter
Join Date: Apr 2012
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2009 C63 AMG
#20
Member
Thread Starter
Join Date: Apr 2012
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2009 C63 AMG
I will go by the local advance store and pickup the poket size one and try it out..if it doesnt work i will just return it..in any case i scheduled a maintenance for thursdsy to get it looked at..hopefully its nothing bad
#21
Member
Thread Starter
Join Date: Apr 2012
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2009 C63 AMG
Most CEL codes are emissions related which burns a steady light and the car is running fine. If you bought the 09 used, there very well could be exhaust modifications or even a software tune by the previous owner. Serious issues usually cause the CEL to blink rapidly in which case it's time to call a tow truck. No car is perfect especially in the age of electronic engine management but there are very few documented cases of catestrophic failure especially considering how hard these cars are pushed on the street and at the track.
I use this code reader from Harbor Freight and it's under $100. Any modification even just removing secondary cats will cause an occasional CEL and this tool provides peace of mind and a way to erase the code.
http://www.harborfreight.com/obd-ii-...ner-99722.html
PS: I would be surprised if your 09 hadn't already had the purge valve issue resolved in it's first year.
I use this code reader from Harbor Freight and it's under $100. Any modification even just removing secondary cats will cause an occasional CEL and this tool provides peace of mind and a way to erase the code.
http://www.harborfreight.com/obd-ii-...ner-99722.html
PS: I would be surprised if your 09 hadn't already had the purge valve issue resolved in it's first year.
Problem..maybe it triggered it again who knows..
#22
Super Member
I will pm you my number and tell you what to look for
#23
Senior Member
Join Date: Apr 2011
Location: Long Island, NY
Posts: 330
Likes: 0
Received 1 Like
on
1 Post
2012 C63 AMG edition 1
I owned a BMW once...never again. If you think your Mercedes has alot of CEL's and issues, BMW and Audi have significantly more problems, from my experience. Every car is going to have issues, especially something as advanced as a C63, but it shouldn't make you want to trade the car in. Thats kind of ridiculous to say...
#24
I too am having issues with the CEL on my 09 C63. I was getting a loose gas cap error so the dealer replaced the cap but the CEL came on again a few days later... Frustrating.
#25
So today i was driving to the car wash when a few miles down the road i noticed my check engine light came on. No Error messages, just the light. So i decided to stop by the local Advance Auto Parts to use their code scanner. Oddly enough the scanner won't link to the AMG..Weird? I tried multiple times to scan it over and over and no luck. Well i went to Autozone instead. They hooked it up and the same issue. Error To Link to vehicle.
I don't know what it could be honestly. I know the weather has been crazy hot lately, but i drove the car all day yesterday in 100+F and it drove fine.
Is there an alternative way to check the code or maybe reset the light completely? As of now i am taking it to the service tomorrow afternoon and let them see if they can connect to it and figure out the issue.
The car however seems to drive just fine, shifts fine, and starts without problems. No hesitation what so ever.
Anyone experience similar issues like this?
I don't know what it could be honestly. I know the weather has been crazy hot lately, but i drove the car all day yesterday in 100+F and it drove fine.
Is there an alternative way to check the code or maybe reset the light completely? As of now i am taking it to the service tomorrow afternoon and let them see if they can connect to it and figure out the issue.
The car however seems to drive just fine, shifts fine, and starts without problems. No hesitation what so ever.
Anyone experience similar issues like this?