Just Did my C63 mid pipe
#1
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: Miami Dade, FL
Posts: 1,728
Likes: 0
Received 10 Likes
on
10 Posts
C63
Just Did my C63 mid pipe
Guys I wanted to share with you what I think Is a clean proper way to mod..
All the pipes are stainless and mandrel bent. I will be adding making another mid pipe with an H to see the sound difference. This mod lets you have a nice clean instal which can be swapped in and out with ZERO issues. I added a flange to the OEM mid pipe so I can swap in and out as I please.
This part can be made to be a one cut and clamp install ZERO welding.
I rather have a flange clamp on my car.
I spoke to the owner and he is willing to make a set of 10units at a low price ( NO MB TAX).
Hope you like
All the pipes are stainless and mandrel bent. I will be adding making another mid pipe with an H to see the sound difference. This mod lets you have a nice clean instal which can be swapped in and out with ZERO issues. I added a flange to the OEM mid pipe so I can swap in and out as I please.
This part can be made to be a one cut and clamp install ZERO welding.
I rather have a flange clamp on my car.
I spoke to the owner and he is willing to make a set of 10units at a low price ( NO MB TAX).
Hope you like
Last edited by Mikegpr03; 11-06-2012 at 05:45 PM. Reason: Adding pics
#3
MBWorld Fanatic!
#7
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: Miami Dade, FL
Posts: 1,728
Likes: 0
Received 10 Likes
on
10 Posts
C63
So far
3 we need 7 more to get a good rate. Ill call him tomorrow and get the $ I'm sure it's gonna be well bellow $500 guys.
He's a car guy and I told him the mission we are all on for a nice clean product and no stupid over price mark up.
He said sure just let me get at least ten guys and that way I can make then in one day ship the next.
It's about time someone steps up makes a nice part and skips the silly "oh it's an AMG so ill charge 3times what it should be" price.
3 we need 7 more to get a good rate. Ill call him tomorrow and get the $ I'm sure it's gonna be well bellow $500 guys.
He's a car guy and I told him the mission we are all on for a nice clean product and no stupid over price mark up.
He said sure just let me get at least ten guys and that way I can make then in one day ship the next.
It's about time someone steps up makes a nice part and skips the silly "oh it's an AMG so ill charge 3times what it should be" price.
Trending Topics
#12
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: Miami Dade, FL
Posts: 1,728
Likes: 0
Received 10 Likes
on
10 Posts
C63
Thank you. As for the power gains, I honestly don't know. Im sure its around maybe 10-15 since you are droppig 2 huge plugs freeing up the flow. I can tell you it sure sounds damn nice
I'll be letting everyone know what the final price is. I hope everyone is in the 50 states since shipping is where the I can't control the price UPS or Fed Ex says. The buyer will be responsible for shipping cost. I will go to the UPS store box it and put a copy of the shipping invoice in with your order. If its $25 then an additional 25 will be needed to have your power pipe sent to you. I can do everything via paypal.
Here's a pic of the H being fabricated minus the MB tax lol
I'll be letting everyone know what the final price is. I hope everyone is in the 50 states since shipping is where the I can't control the price UPS or Fed Ex says. The buyer will be responsible for shipping cost. I will go to the UPS store box it and put a copy of the shipping invoice in with your order. If its $25 then an additional 25 will be needed to have your power pipe sent to you. I can do everything via paypal.
Here's a pic of the H being fabricated minus the MB tax lol
Last edited by Mikegpr03; 11-07-2012 at 09:09 AM.
#14
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: Miami Dade, FL
Posts: 1,728
Likes: 0
Received 10 Likes
on
10 Posts
C63
Ok gents here's the scoop.
The pipe will be made just as mine ( in stainless steel and mandrel bent ) just like the OEM. The final product will just like mine but it will require ZERO welding. Just one cut and bolt it right on with the clamp supplied. Everything else will bolt right in where your OEM bolt on connections are. Best of all it is a nice clean proper way. And 100% reversible.
The section where you see the flange welded on will be extended and will slip on where you make the instructed cut. I added a flange because I wanted to bolt on and off in case I change my mind.
The final price will be $400.00 plus shipping if we get 10 buyers. I will pack them myself and send you a copy of the shipping invoice. What ever it cost to ship is what you pay. Guys you pay PayPal fee's. I'm adding money (about $20 bucks hence the total cost $400.00 plus what ever it takes to get it to where you want it shipped to ) to cover the boxes and bubble wrap from the Mailbox store so i know your power pipe gets to your place in one piece.
I'm glad we finally have a quality part for our cars and not pay an eyeball for it.
Side note I added the H and trust me when I tell you the H makes it perfect!!!
Not too loud not too quiet just freaken perfect. I will record a vid of the car with it on and hopefully I can post it. The car sounds just right enough bark but not cheap sounding like you chopped up your car in a sad attempt to make it sound better.
He can make it with an H or straight same cost but I really really really recommend the H. I had both and it's perfect with the H. Zero drone in the cabin at any speeds too.
Lets get the list going so we can get the power pipes made. Min 10 since he needs to make a jig off mine and make the 10 in one run.
Thanks
Mike
The pipe will be made just as mine ( in stainless steel and mandrel bent ) just like the OEM. The final product will just like mine but it will require ZERO welding. Just one cut and bolt it right on with the clamp supplied. Everything else will bolt right in where your OEM bolt on connections are. Best of all it is a nice clean proper way. And 100% reversible.
The section where you see the flange welded on will be extended and will slip on where you make the instructed cut. I added a flange because I wanted to bolt on and off in case I change my mind.
The final price will be $400.00 plus shipping if we get 10 buyers. I will pack them myself and send you a copy of the shipping invoice. What ever it cost to ship is what you pay. Guys you pay PayPal fee's. I'm adding money (about $20 bucks hence the total cost $400.00 plus what ever it takes to get it to where you want it shipped to ) to cover the boxes and bubble wrap from the Mailbox store so i know your power pipe gets to your place in one piece.
I'm glad we finally have a quality part for our cars and not pay an eyeball for it.
Side note I added the H and trust me when I tell you the H makes it perfect!!!
Not too loud not too quiet just freaken perfect. I will record a vid of the car with it on and hopefully I can post it. The car sounds just right enough bark but not cheap sounding like you chopped up your car in a sad attempt to make it sound better.
He can make it with an H or straight same cost but I really really really recommend the H. I had both and it's perfect with the H. Zero drone in the cabin at any speeds too.
Lets get the list going so we can get the power pipes made. Min 10 since he needs to make a jig off mine and make the 10 in one run.
Thanks
Mike
Last edited by Mikegpr03; 11-07-2012 at 02:12 PM.
#15
MBWorld Fanatic!
Join Date: Nov 2009
Location: Relocated
Posts: 4,418
Received 382 Likes
on
237 Posts
2010 Irridium Silver MB C63 AMG Sedan
Looks sweeeeet. Very well done...
^^^ the guy above is welding with no glasses??? No shade????? He is gonna go blind in about a week if he keeps that up...it will kill his retina, cones and rods...
^^^ the guy above is welding with no glasses??? No shade????? He is gonna go blind in about a week if he keeps that up...it will kill his retina, cones and rods...
#18
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: Miami Dade, FL
Posts: 1,728
Likes: 0
Received 10 Likes
on
10 Posts
C63
As soon as my Nephew makes it home ( he's the assistant MB tech/ car washer-waxer/ lawn boy- lol)
Ill have him record and post vids.
Ill have him record and post vids.
Last edited by Mikegpr03; 11-07-2012 at 02:08 PM.
#20
MBWorld Fanatic!
Join Date: Sep 2008
Location: Central Florida
Posts: 2,177
Likes: 0
Received 13 Likes
on
12 Posts
2014 Audi RS7
Guys,
If you leave the stock original resonator on behind these pipes you DO NOT need the "H". There is a built in "H" in the resonator. Just an FYI.
Nice mod by the way!!
If you leave the stock original resonator on behind these pipes you DO NOT need the "H". There is a built in "H" in the resonator. Just an FYI.
Nice mod by the way!!
#21
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: Miami Dade, FL
Posts: 1,728
Likes: 0
Received 10 Likes
on
10 Posts
C63
Kieth is right. That is why I went with the straight pipes and no H thinking the internal H in the resonator would be enough. I added the H because the straight setup was too loud. Once the H was added on the power pipe that AMG sound was back only a bit louder " just right for me". I prefer adding the Additional H on to the pipe I made. It's your call gents, its a daily driver go the H route straight pipe was just a bit too loud for me( I think I'm getting old lol). Same cost straight or H. I personally was looking tastefully done mod and sound not too loud.
Thank Keith!
Just did a couple of vids. I don't know how to up load them. Can someone email me and I will send them over so you guys can post it.
Thank Keith!
Just did a couple of vids. I don't know how to up load them. Can someone email me and I will send them over so you guys can post it.
Last edited by Mikegpr03; 11-07-2012 at 03:20 PM. Reason: Adding vid